uXeBoy

#!/bin/bash

#    A script to configure Lattice iCE40 FPGA by SPI from Raspberry Pi
#
#    Copyright (C) 2015 Jan Marjanovic <jan@marjanovic.pro>
#
#    This program is free software: you can redistribute it and/or modify
#    it under the terms of the GNU General Public License as published by
#    the Free Software Foundation, either version 3 of the License, or
#    (at your option) any later version.

uXeBoy

#include "PS3USB.h"

// Satisfy the IDE, which needs to see the include statment in the ino too.
#ifdef dobogusinclude
#include <SPI.h>
#endif

USB Usb;
PS3USB PS3(&Usb);

uXeBoy

/**
 * @file Arduboy2Core.cpp
 * \brief
 * The Arduboy2Core class for Arduboy hardware initilization and control.
 */

#include "Arduboy2Core.h"

const uint8_t PROGMEM lcdBootProgram[] = {
  // boot defaults are commented out but left here in case they

uXeBoy

/**
 * @file Arduboy2.cpp
 * \brief
 * The Arduboy2Base and Arduboy2 classes and support objects and definitions.
 */

#include "Arduboy2.h"
#include "ab_logo.c"
#include "glcdfont.c"

uXeBoy

 /* Read Joystick
  * ------------
  *
  * Reads two analog pins that are supposed to be
  * connected to a joystick made of two potentiometers
  *
  * http://www.0j0.org | http://arduino.berlios.de
  * copyleft 2005 DojoDave for DojoCorp
  */

uXeBoy

:100000000C94E8050C9410060C9410060C94100641
:100010000C9410060C9410060C9410060C94100608
:100020000C9410060C9410060C94510F0C941309A8
:100030000C9410060C9410060C9410060C941006E8
:100040000C9410060C9410060C9410060C941006D8
:100050000C9410060C9410060C9410060C94940B3F
:100060000C9410060C9410060C9410060C941006B8
:100070000C9410060C9410060C9410060C941006A8
:100080000C9410060C9410060C9410060C94100698
:100090000C9410060C9410060C9410060C94100688

uXeBoy

//
//  Font data for Bit5x5
//  based on http://www.mattlag.com/bitfonts/bit5x5.ttf
//

#include <avr/io.h>
#include <avr/pgmspace.h>

// Character bitmaps for Bit5x5
static const unsigned char font[] PROGMEM =

uXeBoy

#include <Wire.h>
#include "Arduboy2.h"

uint8_t AcXH, AcXL;

constexpr float Tau = 6.28318530718;

constexpr float mapRange(float input, float inputMin, float inputMax, float outputMin, float outputMax)
{
  return outputMin + (input - inputMin) * ((outputMax - outputMin) / (inputMax - inputMin));

uXeBoy

/*
	Copyright (C) 2018 Pharap (@Pharap)

	Licensed under the Apache License, Version 2.0 (the "License");
	you may not use this file except in compliance with the License.
	You may obtain a copy of the License at

	http://www.apache.org/licenses/LICENSE-2.0

	Unless required by applicable law or agreed to in writing, software

uXeBoy

`default_nettype none // disable implicit definitions by Verilog
//-----------------------------------------------------------------
// minimalDVID_encoder.vhd : A quick and dirty DVI-D implementation
//
// Author: Mike Field <hamster@snap.net.nz>
//
// DVI-D uses TMDS as the 'on the wire' protocol, where each 8-bit
// value is mapped to one or two 10-bit symbols, depending on how
// many 1s or 0s have been sent. This makes it a DC balanced protocol,
// as a correctly implemented stream will have (almost) an equal