Communicate with the RN131 module through the serial port. Plug your device to your computer and open a serial terminal.
The speed must be 9,600 bauds, then enter the following commands in the serial terminal. You should type the string “$$$” before each set of commands to enter the command mode:
Command set #1:
| // MPU-6050 Short Example Sketch | |
| // By Arduino User JohnChi | |
| // Modified by Mateo Vélez - Metavix | |
| #include <ubidots_arduinoYUN.h> | |
| #include <Process.h> | |
| #include<Wire.h> | |
| const int MPU=0x68; //dirección I2C del MPU-6050 | |
| int16_t AcX,AcY,AcZ,Tmp,GyX,GyY,GyZ; |
| /* | |
| Ejemplo para Dispensador de comidas para mascotas | |
| Este codigo es para controlar el servo | |
| del dispensador de alimentos para mascotas | |
| Arduino pins: | |
| 5V --> cable rojo del servo | |
| GND --> cable negro del servo |
| #include <Wprogram.h> | |
| #include <Wire.h> | |
| #include <WiFiShieldOrPmodWiFi_G.h> | |
| #include <DNETcK.h> | |
| #include <DWIFIcK.h> | |
| #include <LedControl.h> | |
| //------------------------------End Librarys---------------------------------- | |
| #define GREEN 0 | |
| #define RED 1 |
| #include <SODAQMdot.h> | |
| // Put here your SSID of lora gateway | |
| #define GATEWAY_SSID "Your_Lora_Gateway_SSID" | |
| // Put here your PASS of lora gateway | |
| #define GATEWAY_PASS "Your_Lora_Gateway_PASS" | |
| // Put here your frequenci sub-band of lora gateway | |
| #define GATEWAY_SUB_BAND "1" | |
| Ubidots loraClient; |
| // Single value | |
| "Variable_Name:Variable_value" | |
| // Multiple values | |
| "Variable_Name_1:Variable_value_1,Variable_Name_2:Variable_value_2,Variable_Name_3:Variable_value_3" |
| [{"id":"e7d65ffe.dc95b","type":"tcp out","host":"translate.ubidots.com","port":"9010","beserver":"client","base64":false,"end":true,"name":"","x":692,"y":304,"z":"7ee6d1fa.eba47","wires":[]},{"id":"5373d534.c169dc","type":"debug","name":"","active":true,"console":"false","complete":"true","x":716,"y":213,"z":"7ee6d1fa.eba47","wires":[]},{"id":"5cd55ff8.a58da","type":"function","name":"Function Ubidots","func":"var TOKEN = \"Your_Token_Here\";\nvar USER_AGENT = \"mDot/1.0\";\nvar dsTag = msg.eui.split(\":\");\nvar DATA_SOURCE_TAG = \"\";\nfor (var j = 0; j < dsTag.length; j++) {\n DATA_SOURCE_TAG += dsTag[j];\n}\nvar data = {};\n\n// Header\ndata.payload = USER_AGENT+\"|POST|\"+TOKEN+\"|\"+DATA_SOURCE_TAG+\"=>\";\n\n// Body\ndata.payload = data.payload + msg.payload;\n\n// Footer\ndata.payload = data.payload + \"|end\";\nreturn data;","outputs":1,"noerr":0,"x":448,"y":212,"z":"7ee6d1fa.eba47","wires":[["e7d65ffe.dc95b","5373d534.c169dc"]]},{"id":"276173d.05dd28c","type":"lora in","name":"","datatype":"utf8" |
| // This #include statement was automatically added by the Particle IDE. | |
| #include "Adafruit_DHT/Adafruit_DHT.h" | |
| // This example is to save multiple variables to the Ubidots API with TCP method | |
| #include "Ubidots/Ubidots.h" | |
| #define TOKEN "xxxxxxxxx" // Put here your Ubidots TOKEN |
| [{"id":"1dc93aec.27a665","type":"mqtt-broker","z":"5600d8f5.a42228","broker":"things.ubidots.com","port":"1883","clientid":"","usetls":false,"verifyservercert":true,"compatmode":true,"keepalive":"60","cleansession":true,"willTopic":"","willQos":"0","willRetain":null,"willPayload":"","birthTopic":"","birthQos":"0","birthRetain":null,"birthPayload":""},{"id":"bf41b1b8.c3d03","type":"mqtt out","z":"5600d8f5.a42228","name":"","topic":"","qos":"1","retain":"","broker":"1dc93aec.27a665","x":524,"y":292,"wires":[]},{"id":"d5607a01.4326a8","type":"bbb-analogue-in","z":"5600d8f5.a42228","pin":"P9_39","topic":"","breakpoints":[{"input":0,"output":0,"mutable":false},{"input":1,"output":1,"mutable":false}],"averaging":false,"name":"Analog Pin 0","x":366,"y":261,"wires":[["f8cbc76e.347e68"]]},{"id":"964042fa.b6bb8","type":"inject","z":"5600d8f5.a42228","name":"","topic":"","payload":"true","payloadType":"bool","repeat":"4","crontab":"","once":true,"x":220,"y":261,"wires":[["d5607a01.4326a8"]]},{"id":"f8cbc76e.347e68","typ |