-
-
Save wildjerry/4381ea1c77e2c7504bd935d188583b78 to your computer and use it in GitHub Desktop.
Msg: FreeCAD 0.19, Libs: 0.19R | |
© Juergen Riegel, Werner Mayer, Yorik van Havre and others 2001-2021 | |
FreeCAD is free and open-source software licensed under the terms of LGPL2+ license. | |
FreeCAD wouldn't be possible without FreeCAD community. | |
##### #### ### #### | |
# # # # # # | |
# ## #### #### # # # # # | |
#### # # # # # # # ##### # # | |
# # #### #### # # # # # | |
# # # # # # # # # ## ## ## | |
# # #### #### ### # # #### ## ## ## | |
Log: Time = Thu Jul 7 20:38:55 2022 | |
Log: AppDataSkipVendor = true | |
Log: AppHomePath = /usr/lib/freecad/ | |
Log: AppIcon = freecad | |
Log: AppTempPath = /tmp/ | |
Log: BinPath = /usr/lib/freecad/bin/ | |
Log: BuildRepositoryURL = https://code.launchpad.net/~vcs-imports/freecad/trunk | |
Log: BuildRevision = | |
Log: BuildRevisionDate = 2021/03/17 08:48:24 | |
Log: BuildVersionMajor = 0 | |
Log: BuildVersionMinor = 19 | |
Log: Console = 0 | |
Log: CopyrightInfo = © Juergen Riegel, Werner Mayer, Yorik van Havre and others 2001-2021 | |
FreeCAD is free and open-source software licensed under the terms of LGPL2+ license. | |
FreeCAD wouldn't be possible without FreeCAD community. | |
##### #### ### #### | |
# # # # # # | |
# ## #### #### # # # # # | |
#### # # # # # # # ##### # # | |
# # #### #### # # # # # | |
# # # # # # # # # ## ## ## | |
# # #### #### ### # # #### ## ## ## | |
Log: Debug = 0 | |
Log: DocPath = /usr/lib/freecad/doc/ | |
Log: ExeName = FreeCAD | |
Log: ExeVendor = FreeCAD | |
Log: ExeVersion = 0.19 | |
Log: LoggingConsole = 1 | |
Log: LoggingFile = 1 | |
Log: LoggingFileName = /home/ubuntu/.FreeCAD/FreeCAD.log | |
Log: MaintainerUrl = http://www.freecadweb.org/wiki/Main_Page | |
Log: PATH = /home/ubuntu/anaconda3/condabin:/home/ubuntu/.local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin:/snap/bin | |
Log: PYTHONPATH = | |
Log: PythonSearchPath = /usr/lib/python39.zip:/usr/lib/python3.9:/usr/lib/python3.9/lib-dynload | |
Log: RunMode = Gui | |
Log: SplashAlignment = Bottom|Left | |
Log: SplashInfoColor = #c8c8c8 | |
Log: SplashScreen = freecadsplash | |
Log: SplashTextColor = #ffffff | |
Log: StartWorkbench = StartWorkbench | |
Log: SystemParameter = /home/ubuntu/.FreeCAD/system.cfg | |
Log: UserAppData = /home/ubuntu/.FreeCAD/ | |
Log: UserHomePath = /home/ubuntu | |
Log: UserParameter = /home/ubuntu/.FreeCAD/user.cfg | |
Log: Verbose = | |
Log: Create Application | |
Log: Run App init script | |
Log: Init: starting App::FreeCADInit.py | |
Log: Init: Searching for modules... | |
Log: Init: Initializing /usr/share/freecad/Mod/Raytracing... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Tux(Init.py not found)... ignore | |
Log: Init: Initializing /usr/share/freecad/Mod/Path... done | |
Log: Init: Initializing /usr/share/freecad/Mod/AddonManager... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Image... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Idf... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Fem... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Material... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Spreadsheet... done | |
Log: Init: Initializing /usr/share/freecad/Mod/OpenSCAD... done | |
Log: Init: Initializing /usr/share/freecad/Mod/MeshPart... done | |
Log: Init: Initializing /usr/share/freecad/Mod/PartDesign... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Test... done | |
Log: Init: Initializing /usr/share/freecad/Mod/ReverseEngineering... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Web... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Robot... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Show(Init.py not found)... ignore | |
Log: Init: Initializing /usr/share/freecad/Mod/Sketcher... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Points... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Arch... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Start... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Surface... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Measure... done | |
Log: Drawing became obsolete in 0.17; consider using TechDraw instead. | |
Log: Init: Initializing /usr/share/freecad/Mod/Drawing... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Draft... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Inspection... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Part... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Mesh... done | |
Log: Init: Initializing /usr/share/freecad/Mod/TechDraw... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Import... done | |
Log: Using /usr/share/freecad/Mod as module path! | |
Log: System path after init: | |
Log: /usr/lib/freecad/bin | |
Log: /usr/share/freecad/Mod/Raytracing | |
Log: /usr/share/freecad/Mod/Tux | |
Log: /usr/share/freecad/Mod/Path | |
Log: /usr/share/freecad/Mod/AddonManager | |
Log: /usr/share/freecad/Mod/Image | |
Log: /usr/share/freecad/Mod/Idf | |
Log: /usr/share/freecad/Mod/Fem | |
Log: /usr/share/freecad/Mod/Material | |
Log: /usr/share/freecad/Mod/Spreadsheet | |
Log: /usr/share/freecad/Mod/OpenSCAD | |
Log: /usr/share/freecad/Mod/MeshPart | |
Log: /usr/share/freecad/Mod/PartDesign | |
Log: /usr/share/freecad/Mod/Test | |
Log: /usr/share/freecad/Mod/ReverseEngineering | |
Log: /usr/share/freecad/Mod/Web | |
Log: /usr/share/freecad/Mod/Robot | |
Log: /usr/share/freecad/Mod/Show | |
Log: /usr/share/freecad/Mod/Sketcher | |
Log: /usr/share/freecad/Mod/Points | |
Log: /usr/share/freecad/Mod/Arch | |
Log: /usr/share/freecad/Mod/Start | |
Log: /usr/share/freecad/Mod/Surface | |
Log: /usr/share/freecad/Mod/Measure | |
Log: /usr/share/freecad/Mod/Drawing | |
Log: /usr/share/freecad/Mod/Draft | |
Log: /usr/share/freecad/Mod/Inspection | |
Log: /usr/share/freecad/Mod/Part | |
Log: /usr/share/freecad/Mod/Mesh | |
Log: /usr/share/freecad/Mod/TechDraw | |
Log: /usr/share/freecad/Mod/Import | |
Log: /home/ubuntu/anaconda3/condabin | |
Log: /home/ubuntu/.local/bin | |
Log: /usr/local/sbin | |
Log: /usr/local/bin | |
Log: /usr/sbin | |
Log: /usr/bin | |
Log: /sbin | |
Log: /bin | |
Log: /usr/games | |
Log: /usr/local/games | |
Log: /snap/bin | |
Log: /snap/bin | |
Log: Init: App::FreeCADInit.py done | |
Log: Init: Creating Gui::Application and QApplication | |
Log: Local server 'FreeCAD' started | |
Log: OpenGL version is: 4.5 (4.5 (Compatibility Profile) Mesa 21.2.6) | |
Log: Run Gui init script | |
Log: Init: Running FreeCADGuiInit.py start script... | |
Log: Init: Searching modules... | |
Log: Init: Initializing /usr/share/freecad/Mod/Raytracing... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Tux... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Path... done | |
Log: Init: Initializing /usr/share/freecad/Mod/AddonManager... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Image... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Idf(InitGui.py not found)... ignore | |
Log: Init: Initializing /usr/share/freecad/Mod/Fem... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Material... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Spreadsheet... done | |
Log: Init: Initializing /usr/share/freecad/Mod/OpenSCAD... done | |
Log: Init: Initializing /usr/share/freecad/Mod/MeshPart... done | |
Log: Init: Initializing /usr/share/freecad/Mod/PartDesign... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Test... done | |
Log: Init: Initializing /usr/share/freecad/Mod/ReverseEngineering... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Web... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Robot... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Show(InitGui.py not found)... ignore | |
Log: Init: Initializing /usr/share/freecad/Mod/Sketcher... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Points... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Arch... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Start... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Surface... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Measure(InitGui.py not found)... ignore | |
Log: Init: Initializing /usr/share/freecad/Mod/Drawing... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Draft... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Inspection... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Part... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Mesh... done | |
Log: Init: Initializing /usr/share/freecad/Mod/TechDraw... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Import... done | |
Log: Init: Loading FreeCAD GUI | |
Log: Init: Running FreeCADGuiInit.py start script... done | |
Log: Init: Activating default workbench StartWorkbench | |
Log: Loading GUI of Web module... done | |
Log: Loading GUI of Start module... done | |
Log: Loading Start module... done | |
Log: Init: Showing main window | |
Log: Main window restored | |
Log: Show main window | |
Log: Toolbars restored | |
Log: Couldn't connect to spacenav daemon. Please ignore if you don't have a spacemouse. | |
Log: Init: Entering event loop | |
Log: Init: Processing command line files | |
Wrn: GitPython not found. Using standard download instead. | |
Log: Hide main window | |
Log: Finish: Event loop left | |
Log: Destruct Gui::Application | |
Log: Couldn't disconnect from spacenav daemon | |
Log: FreeCAD terminating... | |
Log: Saving system parameter... | |
Log: Saving system parameter...done | |
Log: Saving user parameter... | |
Log: Saving user parameter...done |
Msg: FreeCAD 0.19, Libs: 0.19R | |
© Juergen Riegel, Werner Mayer, Yorik van Havre and others 2001-2021 | |
FreeCAD is free and open-source software licensed under the terms of LGPL2+ license. | |
FreeCAD wouldn't be possible without FreeCAD community. | |
##### #### ### #### | |
# # # # # # | |
# ## #### #### # # # # # | |
#### # # # # # # # ##### # # | |
# # #### #### # # # # # | |
# # # # # # # # # ## ## ## | |
# # #### #### ### # # #### ## ## ## | |
Log: Time = Wed Jul 13 15:48:26 2022 | |
Log: AppDataSkipVendor = true | |
Log: AppHomePath = /usr/lib/freecad/ | |
Log: AppIcon = freecad | |
Log: AppTempPath = /tmp/ | |
Log: BinPath = /usr/lib/freecad/bin/ | |
Log: BuildRepositoryURL = https://code.launchpad.net/~vcs-imports/freecad/trunk | |
Log: BuildRevision = | |
Log: BuildRevisionDate = 2022/02/14 17:05:44 | |
Log: BuildVersionMajor = 0 | |
Log: BuildVersionMinor = 19 | |
Log: Console = 0 | |
Log: CopyrightInfo = © Juergen Riegel, Werner Mayer, Yorik van Havre and others 2001-2021 | |
FreeCAD is free and open-source software licensed under the terms of LGPL2+ license. | |
FreeCAD wouldn't be possible without FreeCAD community. | |
##### #### ### #### | |
# # # # # # | |
# ## #### #### # # # # # | |
#### # # # # # # # ##### # # | |
# # #### #### # # # # # | |
# # # # # # # # # ## ## ## | |
# # #### #### ### # # #### ## ## ## | |
Log: Debug = 0 | |
Log: DocPath = /usr/lib/freecad/doc/ | |
Log: ExeName = FreeCAD | |
Log: ExeVendor = FreeCAD | |
Log: ExeVersion = 0.19 | |
Log: LoggingConsole = 1 | |
Log: LoggingFile = 1 | |
Log: LoggingFileName = /home/wildjerry/.FreeCAD/FreeCAD.log | |
Log: MaintainerUrl = http://www.freecadweb.org/wiki/Main_Page | |
Log: PATH = /usr/lib/freecad/bin:/usr/share/freecad/Mod/TechDraw:/usr/share/freecad/Mod/OpenSCAD:/usr/share/freecad/Mod/Material:/usr/share/freecad/Mod/Start:/usr/share/freecad/Mod/Sketcher:/usr/share/freecad/Mod/ReverseEngineering:/usr/share/freecad/Mod/PartDesign:/usr/share/freecad/Mod/Raytracing:/usr/share/freecad/Mod/Inspection:/usr/share/freecad/Mod/Mesh:/usr/share/freecad/Mod/Measure:/usr/share/freecad/Mod/Web:/usr/share/freecad/Mod/Robot:/usr/share/freecad/Mod/Part:/usr/share/freecad/Mod/AddonManager:/usr/share/freecad/Mod/Idf:/usr/share/freecad/Mod/Spreadsheet:/usr/share/freecad/Mod/Image:/usr/share/freecad/Mod/Fem:/usr/share/freecad/Mod/Show:/usr/share/freecad/Mod/Points:/usr/share/freecad/Mod/Import:/usr/share/freecad/Mod/Path:/usr/share/freecad/Mod/Tux:/usr/share/freecad/Mod/MeshPart:/usr/share/freecad/Mod/Test:/usr/share/freecad/Mod/Arch:/usr/share/freecad/Mod/Draft:/usr/share/freecad/Mod/Drawing:/usr/share/freecad/Mod/Surface:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin:/snap/bin | |
Log: PYTHONPATH = | |
Log: PythonSearchPath = /usr/lib/python310.zip:/usr/lib/python3.10:/usr/lib/python3.10/lib-dynload | |
Log: RunMode = Gui | |
Log: SplashAlignment = Bottom|Left | |
Log: SplashInfoColor = #c8c8c8 | |
Log: SplashScreen = freecadsplash | |
Log: SplashTextColor = #ffffff | |
Log: StartWorkbench = StartWorkbench | |
Log: SystemParameter = /home/wildjerry/.FreeCAD/system.cfg | |
Log: UserAppData = /home/wildjerry/.FreeCAD/ | |
Log: UserHomePath = /home/wildjerry | |
Log: UserParameter = /home/wildjerry/.FreeCAD/user.cfg | |
Log: Verbose = | |
Log: Create Application | |
Log: Run App init script | |
Log: Init: starting App::FreeCADInit.py | |
Log: Init: Searching for modules... | |
Log: Init: Initializing /usr/share/freecad/Mod/TechDraw... done | |
Log: Init: Initializing /usr/share/freecad/Mod/OpenSCAD... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Material... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Start... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Sketcher... done | |
Log: Init: Initializing /usr/share/freecad/Mod/ReverseEngineering... done | |
Log: Init: Initializing /usr/share/freecad/Mod/PartDesign... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Raytracing... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Inspection... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Mesh... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Measure... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Web... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Robot... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Part... done | |
Log: Init: Initializing /usr/share/freecad/Mod/AddonManager... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Idf... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Spreadsheet... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Image... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Fem... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Show(Init.py not found)... ignore | |
Log: Init: Initializing /usr/share/freecad/Mod/Points... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Import... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Path... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Tux(Init.py not found)... ignore | |
Log: Init: Initializing /usr/share/freecad/Mod/MeshPart... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Test... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Arch... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Draft... done | |
Log: Drawing became obsolete in 0.17; consider using TechDraw instead. | |
Log: Init: Initializing /usr/share/freecad/Mod/Drawing... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Surface... done | |
Log: Using /usr/share/freecad/Mod as module path! | |
Log: System path after init: | |
Log: /usr/lib/freecad/bin | |
Log: /usr/share/freecad/Mod/TechDraw | |
Log: /usr/share/freecad/Mod/OpenSCAD | |
Log: /usr/share/freecad/Mod/Material | |
Log: /usr/share/freecad/Mod/Start | |
Log: /usr/share/freecad/Mod/Sketcher | |
Log: /usr/share/freecad/Mod/ReverseEngineering | |
Log: /usr/share/freecad/Mod/PartDesign | |
Log: /usr/share/freecad/Mod/Raytracing | |
Log: /usr/share/freecad/Mod/Inspection | |
Log: /usr/share/freecad/Mod/Mesh | |
Log: /usr/share/freecad/Mod/Measure | |
Log: /usr/share/freecad/Mod/Web | |
Log: /usr/share/freecad/Mod/Robot | |
Log: /usr/share/freecad/Mod/Part | |
Log: /usr/share/freecad/Mod/AddonManager | |
Log: /usr/share/freecad/Mod/Idf | |
Log: /usr/share/freecad/Mod/Spreadsheet | |
Log: /usr/share/freecad/Mod/Image | |
Log: /usr/share/freecad/Mod/Fem | |
Log: /usr/share/freecad/Mod/Show | |
Log: /usr/share/freecad/Mod/Points | |
Log: /usr/share/freecad/Mod/Import | |
Log: /usr/share/freecad/Mod/Path | |
Log: /usr/share/freecad/Mod/Tux | |
Log: /usr/share/freecad/Mod/MeshPart | |
Log: /usr/share/freecad/Mod/Test | |
Log: /usr/share/freecad/Mod/Arch | |
Log: /usr/share/freecad/Mod/Draft | |
Log: /usr/share/freecad/Mod/Drawing | |
Log: /usr/share/freecad/Mod/Surface | |
Log: /usr/lib/freecad/bin | |
Log: /usr/share/freecad/Mod/TechDraw | |
Log: /usr/share/freecad/Mod/OpenSCAD | |
Log: /usr/share/freecad/Mod/Material | |
Log: /usr/share/freecad/Mod/Start | |
Log: /usr/share/freecad/Mod/Sketcher | |
Log: /usr/share/freecad/Mod/ReverseEngineering | |
Log: /usr/share/freecad/Mod/PartDesign | |
Log: /usr/share/freecad/Mod/Raytracing | |
Log: /usr/share/freecad/Mod/Inspection | |
Log: /usr/share/freecad/Mod/Mesh | |
Log: /usr/share/freecad/Mod/Measure | |
Log: /usr/share/freecad/Mod/Web | |
Log: /usr/share/freecad/Mod/Robot | |
Log: /usr/share/freecad/Mod/Part | |
Log: /usr/share/freecad/Mod/AddonManager | |
Log: /usr/share/freecad/Mod/Idf | |
Log: /usr/share/freecad/Mod/Spreadsheet | |
Log: /usr/share/freecad/Mod/Image | |
Log: /usr/share/freecad/Mod/Fem | |
Log: /usr/share/freecad/Mod/Show | |
Log: /usr/share/freecad/Mod/Points | |
Log: /usr/share/freecad/Mod/Import | |
Log: /usr/share/freecad/Mod/Path | |
Log: /usr/share/freecad/Mod/Tux | |
Log: /usr/share/freecad/Mod/MeshPart | |
Log: /usr/share/freecad/Mod/Test | |
Log: /usr/share/freecad/Mod/Arch | |
Log: /usr/share/freecad/Mod/Draft | |
Log: /usr/share/freecad/Mod/Drawing | |
Log: /usr/share/freecad/Mod/Surface | |
Log: /usr/local/sbin | |
Log: /usr/local/bin | |
Log: /usr/sbin | |
Log: /usr/bin | |
Log: /sbin | |
Log: /bin | |
Log: /usr/games | |
Log: /usr/local/games | |
Log: /snap/bin | |
Log: /snap/bin | |
Log: Init: App::FreeCADInit.py done | |
Log: Init: Creating Gui::Application and QApplication | |
Log: Warning: Ignoring XDG_SESSION_TYPE=wayland on Gnome. Use QT_QPA_PLATFORM=wayland to run on Wayland anyway. | |
Log: Local server 'FreeCAD' started | |
Log: OpenGL version is: 4.5 (4.5 (Compatibility Profile) Mesa 22.0.1) | |
Log: Run Gui init script | |
Log: Init: Running FreeCADGuiInit.py start script... | |
Log: Init: Searching modules... | |
Log: Init: Initializing /usr/share/freecad/Mod/TechDraw... done | |
Log: Init: Initializing /usr/share/freecad/Mod/OpenSCAD... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Material... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Start... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Sketcher... done | |
Log: Init: Initializing /usr/share/freecad/Mod/ReverseEngineering... done | |
Log: Init: Initializing /usr/share/freecad/Mod/PartDesign... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Raytracing... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Inspection... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Mesh... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Measure(InitGui.py not found)... ignore | |
Log: Init: Initializing /usr/share/freecad/Mod/Web... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Robot... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Part... done | |
Log: Init: Initializing /usr/share/freecad/Mod/AddonManager... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Idf(InitGui.py not found)... ignore | |
Log: Init: Initializing /usr/share/freecad/Mod/Spreadsheet... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Image... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Fem... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Show(InitGui.py not found)... ignore | |
Log: Init: Initializing /usr/share/freecad/Mod/Points... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Import... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Path... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Tux... done | |
Log: Init: Initializing /usr/share/freecad/Mod/MeshPart... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Test... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Arch... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Draft... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Drawing... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Surface... done | |
Log: Init: Loading FreeCAD GUI | |
Log: Init: Running FreeCADGuiInit.py start script... done | |
Log: Init: Activating default workbench StartWorkbench | |
Log: Loading GUI of Web module... done | |
Log: Loading GUI of Start module... done | |
Log: Loading Start module... done | |
Log: Init: Showing main window | |
Log: Main window restored | |
Log: Show main window | |
Log: Toolbars restored | |
Log: Couldn't connect to spacenav daemon. Please ignore if you don't have a spacemouse. | |
Log: Init: Entering event loop | |
Log: Init: Processing command line files | |
Wrn: GitPython not found. Using standard download instead. | |
Log: Hide main window | |
Log: Finish: Event loop left | |
Log: Destruct Gui::Application | |
Log: Couldn't disconnect from spacenav daemon | |
Log: FreeCAD terminating... | |
Log: Saving system parameter... | |
Log: Saving system parameter...done | |
Log: Saving user parameter... | |
Log: Saving user parameter...done |
Msg: FreeCAD 0.20, Libs: 2022.625R14555 (Git shallow) | |
Log: Time = 2022-Jul-07 20:28:02 | |
Log: AboutImage = freecadabout | |
Log: AppDataSkipVendor = true | |
Log: AppHomePath = /snap/freecad-realthunder/47/usr/ | |
Log: AppIcon = freecad | |
Log: AppTempPath = /home/ubuntu/snap/freecad-realthunder/common/temp/ | |
Log: Application = FreeCAD Link Branch | |
Log: BinPath = /snap/freecad-realthunder/47/usr/bin/ | |
Log: BuildRepositoryURL = Unknown | |
Log: BuildRevision = 14555 (Git shallow) | |
Log: BuildRevisionBranch = (HEAD detached at 2022.06.25-edge) | |
Log: BuildRevisionDate = 20220625 | |
Log: BuildRevisionHash = 0191f4edf1b19bf52124a4be654074b5cc035645 | |
Log: BuildVersionMajor = 2022 | |
Log: BuildVersionMinor = 625 | |
Log: Console = 0 | |
Log: CopyrightInfo = | |
Log: Debug = 0 | |
Log: DocPath = /snap/freecad-realthunder/47/usr/doc/ | |
Log: ExeName = FreeCAD | |
Log: ExeVendor = FreeCAD | |
Log: ExeVersion = 0.20 | |
Log: LoggingConsole = 1 | |
Log: LoggingFile = 1 | |
Log: LoggingFileName = /home/ubuntu/snap/freecad-realthunder/common/.FreeCAD/FreeCAD.log | |
Log: MaintainerUrl = https://github.com/realthunder/FreeCAD | |
Log: PATH = /snap/freecad-realthunder/47/usr/sbin:/snap/freecad-realthunder/47/usr/bin:/snap/freecad-realthunder/47/sbin:/snap/freecad-realthunder/47/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/freecad-realthunder/47/kf5/usr/bin | |
Log: PYTHONPATH = | |
Log: PythonSearchPath = /snap/freecad-realthunder/47/usr/lib/python38.zip:/snap/freecad-realthunder/47/usr/lib/python3.8:/snap/freecad-realthunder/47/usr/lib/python3.8/lib-dynload | |
Log: RunMode = Gui | |
Log: SplashAlignment = Bottom|Left | |
Log: SplashInfoColor = #101010 | |
Log: SplashInfoExeName = FreeCAD Link Daily | |
Log: SplashInfoPosition = 12 38 | |
Log: SplashInfoVersion = 2022.06.25 | |
Log: SplashScreen = freecad_link_splash.png | |
Log: SplashTextColor = #000000 | |
Log: StartWorkbench = StartWorkbench | |
Log: SystemParameter = /home/ubuntu/snap/freecad-realthunder/common/.FreeCAD/link.system.cfg | |
Log: UserAppData = /home/ubuntu/snap/freecad-realthunder/common/.FreeCAD/ | |
Log: UserHomePath = /home/ubuntu/snap/freecad-realthunder/common | |
Log: UserParameter = /home/ubuntu/snap/freecad-realthunder/common/.FreeCAD/link.user.cfg | |
Log: VendorCFGPrefix = link. | |
Log: Verbose = | |
Log: WindowIcon = freecad_link.svg | |
Log: WindowTitle = FreeCAD Link Daily | |
Log: Create Application | |
Log: Run App init script | |
Log: Init: starting App::FreeCADInit.py | |
Log: Init: Searching for modules... | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/AddonManager... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Arch... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Assembly3(Init.py not found)... ignore | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Draft... done | |
Log: Drawing became obsolete in 0.17; consider using TechDraw instead. | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Drawing... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Fem... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Idf... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Image... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Import... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Inspection... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Material... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Measure... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Mesh... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/MeshPart... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/OpenSCAD... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Part... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/PartDesign... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Path... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Plot(Init.py not found)... ignore | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Points... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Raytracing... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/ReverseEngineering... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Robot... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Show(Init.py not found)... ignore | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Sketcher... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/SnapSetup... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Spreadsheet... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Start... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Surface... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/TechDraw... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Test... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Tux(Init.py not found)... ignore | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Web... done | |
Log: Init: Initializing /home/ubuntu/snap/freecad-realthunder/common/.FreeCAD/Mod/3D_Printing_Tools(Init.py not found)... ignore | |
Log: Init: Initializing /home/ubuntu/snap/freecad-realthunder/common/.FreeCAD/Mod/fcgear(Init.py not found)... ignore | |
Log: Init: Initializing /home/ubuntu/snap/freecad-realthunder/common/.FreeCAD/Mod/fasteners... done | |
Log: Init: Initializing /home/ubuntu/snap/freecad-realthunder/common/.FreeCAD/Mod/Rocket... done | |
Log: Init: Initializing freecad.fc_cadquery | |
Log: Module: Part | |
Log: Loading Part module... done | |
Log: Init: No init module found in freecad.fc_cadquery, skipping | |
Log: Init: Initializing freecad.gears | |
Log: Init: No init module found in freecad.gears, skipping | |
Log: Init: Initializing freecad.asm3 | |
Log: Init: No init module found in freecad.asm3, skipping | |
Log: Using /snap/freecad-realthunder/47/usr/Mod as module path! | |
Log: System path after init: | |
Log: /snap/freecad-realthunder/47/usr/bin | |
Log: /snap/freecad-realthunder/47/usr/Mod/AddonManager | |
Log: /snap/freecad-realthunder/47/usr/Mod/Arch | |
Log: /snap/freecad-realthunder/47/usr/Mod/Assembly3 | |
Log: /snap/freecad-realthunder/47/usr/Mod/Draft | |
Log: /snap/freecad-realthunder/47/usr/Mod/Drawing | |
Log: /snap/freecad-realthunder/47/usr/Mod/Fem | |
Log: /snap/freecad-realthunder/47/usr/Mod/Idf | |
Log: /snap/freecad-realthunder/47/usr/Mod/Image | |
Log: /snap/freecad-realthunder/47/usr/Mod/Import | |
Log: /snap/freecad-realthunder/47/usr/Mod/Inspection | |
Log: /snap/freecad-realthunder/47/usr/Mod/Material | |
Log: /snap/freecad-realthunder/47/usr/Mod/Measure | |
Log: /snap/freecad-realthunder/47/usr/Mod/Mesh | |
Log: /snap/freecad-realthunder/47/usr/Mod/MeshPart | |
Log: /snap/freecad-realthunder/47/usr/Mod/OpenSCAD | |
Log: /snap/freecad-realthunder/47/usr/Mod/Part | |
Log: /snap/freecad-realthunder/47/usr/Mod/PartDesign | |
Log: /snap/freecad-realthunder/47/usr/Mod/Path | |
Log: /snap/freecad-realthunder/47/usr/Mod/Plot | |
Log: /snap/freecad-realthunder/47/usr/Mod/Points | |
Log: /snap/freecad-realthunder/47/usr/Mod/Raytracing | |
Log: /snap/freecad-realthunder/47/usr/Mod/ReverseEngineering | |
Log: /snap/freecad-realthunder/47/usr/Mod/Robot | |
Log: /snap/freecad-realthunder/47/usr/Mod/Show | |
Log: /snap/freecad-realthunder/47/usr/Mod/Sketcher | |
Log: /snap/freecad-realthunder/47/usr/Mod/SnapSetup | |
Log: /snap/freecad-realthunder/47/usr/Mod/Spreadsheet | |
Log: /snap/freecad-realthunder/47/usr/Mod/Start | |
Log: /snap/freecad-realthunder/47/usr/Mod/Surface | |
Log: /snap/freecad-realthunder/47/usr/Mod/TechDraw | |
Log: /snap/freecad-realthunder/47/usr/Mod/Test | |
Log: /snap/freecad-realthunder/47/usr/Mod/Tux | |
Log: /snap/freecad-realthunder/47/usr/Mod/Web | |
Log: /home/ubuntu/snap/freecad-realthunder/common/.FreeCAD/Mod/3D_Printing_Tools | |
Log: /home/ubuntu/snap/freecad-realthunder/common/.FreeCAD/Mod/fcgear | |
Log: /home/ubuntu/snap/freecad-realthunder/common/.FreeCAD/Mod/fasteners | |
Log: /home/ubuntu/snap/freecad-realthunder/common/.FreeCAD/Mod/Rocket | |
Log: /snap/freecad-realthunder/47/usr/sbin | |
Log: /snap/freecad-realthunder/47/usr/bin | |
Log: /snap/freecad-realthunder/47/sbin | |
Log: /snap/freecad-realthunder/47/bin | |
Log: /usr/local/sbin | |
Log: /usr/local/bin | |
Log: /usr/sbin | |
Log: /usr/bin | |
Log: /sbin | |
Log: /bin | |
Log: /usr/games | |
Log: /usr/local/games | |
Log: /snap/freecad-realthunder/47/kf5/usr/bin | |
Log: Init: App::FreeCADInit.py done | |
Log: Init: Creating Gui::Application and QApplication | |
Log: Qt: Session management error: Could not open network socket | |
Log: Local server 'FreeCAD' started | |
Log: OpenGL version is: 4.5 (4.5 (Compatibility Profile) Mesa 21.2.6) | |
Log: Run Gui init script | |
Log: Init: Running FreeCADGuiInit.py start script... | |
Log: Init: Searching modules... | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/AddonManager... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Arch... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Assembly3(InitGui.py not found)... ignore | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Draft... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Drawing... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Fem... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Idf(InitGui.py not found)... ignore | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Image... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Import... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Inspection... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Material... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Measure(InitGui.py not found)... ignore | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Mesh... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/MeshPart... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/OpenSCAD... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Part... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/PartDesign... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Path... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Plot(InitGui.py not found)... ignore | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Points... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Raytracing... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/ReverseEngineering... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Robot... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Show(InitGui.py not found)... ignore | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Sketcher... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/SnapSetup(InitGui.py not found)... ignore | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Spreadsheet... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Start... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Surface... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/TechDraw... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Test... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Tux... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Web... done | |
Log: Init: Initializing /home/ubuntu/snap/freecad-realthunder/common/.FreeCAD/Mod/3D_Printing_Tools... done | |
Log: Init: Initializing /home/ubuntu/snap/freecad-realthunder/common/.FreeCAD/Mod/fcgear(InitGui.py not found)... ignore | |
Log: Init: Initializing /home/ubuntu/snap/freecad-realthunder/common/.FreeCAD/Mod/fasteners... done | |
Log: Init: Initializing /home/ubuntu/snap/freecad-realthunder/common/.FreeCAD/Mod/Rocket... done | |
Log: Init: Initializing freecad.fc_cadquery | |
Log: Init: No init_gui module found in freecad.fc_cadquery, skipping | |
Log: Init: Initializing freecad.gears | |
Log: Init: Initializing freecad.gears... done | |
Log: Init: Initializing freecad.asm3 | |
Log: Init: Initializing freecad.asm3... done | |
Log: Init: Loading FreeCAD GUI | |
Log: Init: Running FreeCADGuiInit.py start script... done | |
Log: Init: Activating default workbench StartWorkbench | |
Log: Loading GUI of Web module... done | |
Log: Loading GUI of Start module... done | |
Log: Loading Start module... done | |
Log: Init: Showing main window | |
Log: Main window restored | |
Log: Show main window | |
Log: Toolbars restored | |
Log: Init: Entering event loop | |
Log: Couldn't connect to spacenav daemon. Please ignore if you don't have a spacemouse. | |
Log: Init: Entering event loop | |
Log: Init: Processing command line files | |
Log: Hide main window | |
Log: Finish: Event loop left | |
Log: Destruct Gui::Application | |
Log: Couldn't disconnect from spacenav daemon | |
Log: FreeCAD terminating... | |
Log: Saving system parameter... | |
Log: Saving system parameter...done | |
Log: Saving user parameter... | |
Log: Saving user parameter...done |
Msg: FreeCAD 0.20, Libs: 2022.712R14555 (Git shallow) | |
Log: Time = 2022-Jul-13 15:56:18 | |
Log: AboutImage = freecad_link_splash.png | |
Log: AppDataSkipVendor = true | |
Log: AppHomePath = /snap/freecad-realthunder/56/usr/ | |
Log: AppIcon = freecad | |
Log: AppTempPath = /home/wildjerry/snap/freecad-realthunder/common/temp/ | |
Log: Application = FreeCAD Link Branch | |
Log: BinPath = /snap/freecad-realthunder/56/usr/bin/ | |
Log: BuildRepositoryURL = Unknown | |
Log: BuildRevision = 14555 (Git shallow) | |
Log: BuildRevisionBranch = (HEAD detached at 2022.07.12-edge) | |
Log: BuildRevisionDate = 20220712 | |
Log: BuildRevisionHash = 8ce366738c70dde14b276f68f6e2f6a380eac004 | |
Log: BuildVersionMajor = 2022 | |
Log: BuildVersionMinor = 712 | |
Log: Console = 0 | |
Log: CopyrightInfo = | |
Log: Debug = 0 | |
Log: DocPath = /snap/freecad-realthunder/56/usr/doc/ | |
Log: ExeName = FreeCAD | |
Log: ExeVendor = FreeCAD | |
Log: ExeVersion = 0.20 | |
Log: LoggingConsole = 1 | |
Log: LoggingFile = 1 | |
Log: LoggingFileName = /home/wildjerry/snap/freecad-realthunder/common/.FreeCAD/FreeCAD.log | |
Log: MaintainerUrl = https://github.com/realthunder/FreeCAD | |
Log: PATH = /snap/freecad-realthunder/56/usr/sbin:/snap/freecad-realthunder/56/usr/bin:/snap/freecad-realthunder/56/sbin:/snap/freecad-realthunder/56/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/freecad-realthunder/56/kf5/usr/bin | |
Log: PYTHONPATH = | |
Log: PythonSearchPath = /snap/freecad-realthunder/56/usr/lib/python38.zip:/snap/freecad-realthunder/56/usr/lib/python3.8:/snap/freecad-realthunder/56/usr/lib/python3.8/lib-dynload | |
Log: RunMode = Gui | |
Log: SplashAlignment = Bottom|Left | |
Log: SplashGif = freecad_link_logo.gif | |
Log: SplashInfoColor = #101010 | |
Log: SplashInfoExeName = FreeCAD Link Daily | |
Log: SplashInfoPosition = 12 38 | |
Log: SplashInfoVersion = 2022.07.12 | |
Log: SplashScreen = freecad_link_splash.png | |
Log: SplashTextColor = #000000 | |
Log: StartWorkbench = StartWorkbench | |
Log: SystemParameter = /home/wildjerry/snap/freecad-realthunder/common/.FreeCAD/link.system.cfg | |
Log: UserAppData = /home/wildjerry/snap/freecad-realthunder/common/.FreeCAD/ | |
Log: UserHomePath = /home/wildjerry/snap/freecad-realthunder/common | |
Log: UserParameter = /home/wildjerry/snap/freecad-realthunder/common/.FreeCAD/link.user.cfg | |
Log: VendorCFGPrefix = link. | |
Log: Verbose = | |
Log: WindowIcon = freecad_link.svg | |
Log: WindowTitle = FreeCAD Link Daily | |
Log: Create Application | |
Log: Run App init script | |
Log: Init: starting App::FreeCADInit.py | |
Log: Init: Searching for modules... | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/AddonManager... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Arch... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Assembly3(Init.py not found)... ignore | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Draft... done | |
Log: Drawing became obsolete in 0.17; consider using TechDraw instead. | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Drawing... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Fem... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Idf... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Image... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Import... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Inspection... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Material... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Measure... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Mesh... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/MeshPart... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/OpenSCAD... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Part... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/PartDesign... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Path... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Plot(Init.py not found)... ignore | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Points... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Raytracing... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/ReverseEngineering... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Robot... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Show(Init.py not found)... ignore | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Sketcher... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/SnapSetup... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Spreadsheet... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Start... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Surface... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/TechDraw... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Test... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Tux(Init.py not found)... ignore | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Web... done | |
Log: Init: Initializing freecad.fc_cadquery | |
Log: Module: Part | |
Log: Loading Part module... done | |
Log: Init: No init module found in freecad.fc_cadquery, skipping | |
Log: Init: Initializing freecad.asm3 | |
Log: Init: No init module found in freecad.asm3, skipping | |
Log: Using /snap/freecad-realthunder/56/usr/Mod as module path! | |
Log: System path after init: | |
Log: /snap/freecad-realthunder/56/usr/bin | |
Log: /snap/freecad-realthunder/56/usr/Mod/AddonManager | |
Log: /snap/freecad-realthunder/56/usr/Mod/Arch | |
Log: /snap/freecad-realthunder/56/usr/Mod/Assembly3 | |
Log: /snap/freecad-realthunder/56/usr/Mod/Draft | |
Log: /snap/freecad-realthunder/56/usr/Mod/Drawing | |
Log: /snap/freecad-realthunder/56/usr/Mod/Fem | |
Log: /snap/freecad-realthunder/56/usr/Mod/Idf | |
Log: /snap/freecad-realthunder/56/usr/Mod/Image | |
Log: /snap/freecad-realthunder/56/usr/Mod/Import | |
Log: /snap/freecad-realthunder/56/usr/Mod/Inspection | |
Log: /snap/freecad-realthunder/56/usr/Mod/Material | |
Log: /snap/freecad-realthunder/56/usr/Mod/Measure | |
Log: /snap/freecad-realthunder/56/usr/Mod/Mesh | |
Log: /snap/freecad-realthunder/56/usr/Mod/MeshPart | |
Log: /snap/freecad-realthunder/56/usr/Mod/OpenSCAD | |
Log: /snap/freecad-realthunder/56/usr/Mod/Part | |
Log: /snap/freecad-realthunder/56/usr/Mod/PartDesign | |
Log: /snap/freecad-realthunder/56/usr/Mod/Path | |
Log: /snap/freecad-realthunder/56/usr/Mod/Plot | |
Log: /snap/freecad-realthunder/56/usr/Mod/Points | |
Log: /snap/freecad-realthunder/56/usr/Mod/Raytracing | |
Log: /snap/freecad-realthunder/56/usr/Mod/ReverseEngineering | |
Log: /snap/freecad-realthunder/56/usr/Mod/Robot | |
Log: /snap/freecad-realthunder/56/usr/Mod/Show | |
Log: /snap/freecad-realthunder/56/usr/Mod/Sketcher | |
Log: /snap/freecad-realthunder/56/usr/Mod/SnapSetup | |
Log: /snap/freecad-realthunder/56/usr/Mod/Spreadsheet | |
Log: /snap/freecad-realthunder/56/usr/Mod/Start | |
Log: /snap/freecad-realthunder/56/usr/Mod/Surface | |
Log: /snap/freecad-realthunder/56/usr/Mod/TechDraw | |
Log: /snap/freecad-realthunder/56/usr/Mod/Test | |
Log: /snap/freecad-realthunder/56/usr/Mod/Tux | |
Log: /snap/freecad-realthunder/56/usr/Mod/Web | |
Log: /snap/freecad-realthunder/56/usr/sbin | |
Log: /snap/freecad-realthunder/56/usr/bin | |
Log: /snap/freecad-realthunder/56/sbin | |
Log: /snap/freecad-realthunder/56/bin | |
Log: /usr/local/sbin | |
Log: /usr/local/bin | |
Log: /usr/sbin | |
Log: /usr/bin | |
Log: /sbin | |
Log: /bin | |
Log: /usr/games | |
Log: /usr/local/games | |
Log: /snap/freecad-realthunder/56/kf5/usr/bin | |
Log: Init: App::FreeCADInit.py done | |
Log: Init: Creating Gui::Application and QApplication | |
Log: Warning: Ignoring XDG_SESSION_TYPE=wayland on Gnome. Use QT_QPA_PLATFORM=wayland to run on Wayland anyway. | |
Log: Qt: Session management error: Could not open network socket | |
Log: Local server 'FreeCAD' started | |
Log: OpenGL version is: 4.5 (4.5 (Compatibility Profile) Mesa 21.2.6) | |
Log: Run Gui init script | |
Log: Init: Running FreeCADGuiInit.py start script... | |
Log: Init: Searching modules... | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/AddonManager... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Arch... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Assembly3(InitGui.py not found)... ignore | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Draft... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Drawing... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Fem... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Idf(InitGui.py not found)... ignore | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Image... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Import... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Inspection... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Material... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Measure(InitGui.py not found)... ignore | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Mesh... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/MeshPart... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/OpenSCAD... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Part... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/PartDesign... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Path... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Plot(InitGui.py not found)... ignore | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Points... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Raytracing... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/ReverseEngineering... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Robot... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Show(InitGui.py not found)... ignore | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Sketcher... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/SnapSetup(InitGui.py not found)... ignore | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Spreadsheet... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Start... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Surface... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/TechDraw... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Test... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Tux... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Web... done | |
Log: Init: Initializing freecad.fc_cadquery | |
Log: Init: No init_gui module found in freecad.fc_cadquery, skipping | |
Log: Init: Initializing freecad.asm3 | |
Wrn: 9.641247 <asm3.main> init_gui.py(14): no solver backend found | |
Log: Init: Initializing freecad.asm3... done | |
Log: Init: Loading FreeCAD GUI | |
Log: Init: Running FreeCADGuiInit.py start script... done | |
Log: Init: Activating default workbench StartWorkbench | |
Log: Loading GUI of Web module... done | |
Log: Loading GUI of Start module... done | |
Log: Loading Start module... done | |
Log: Init: Showing main window | |
Log: Main window restored | |
Log: Show main window | |
Log: Toolbars restored | |
Log: Init: Entering event loop | |
Log: Couldn't connect to spacenav daemon. Please ignore if you don't have a spacemouse. | |
Log: Init: Entering event loop | |
Log: Init: Processing command line files | |
Log: "Empty widget item in QVBoxLayout 'verticalLayout'." | |
Log: Hide main window | |
Log: Finish: Event loop left | |
Log: Destruct Gui::Application | |
Log: Couldn't disconnect from spacenav daemon | |
Log: FreeCAD terminating... | |
Log: Saving system parameter... | |
Log: Saving system parameter...done | |
Log: Saving user parameter... | |
Log: Saving user parameter...done |
@chennes Can you please advise me on what to do from here?
Well, we need to get logging working properly -- without it, it's impossible to tell what is going on. None of the logs above look like the log level is set -- can you verify that Edit->Preferences->General->Output window has the top four boxes checked? When you start up the Addon Manager with the Report View showing, you should see the GitHub message of the day displayed.
Oh, sorry, I was under the impression these were logs from FreeCAD 0.20, but that doesn't appear to be the case. I am not going to be much help, I simply rewrote the bulk of the Addon Manager for 0.20, so I'm not sure what's wrong in 0.19.
Oh, sorry, I was under the impression these were logs from FreeCAD 0.20, but that doesn't appear to be the case. I am not going to be much help, I simply rewrote the bulk of the Addon Manager for 0.20, so I'm not sure what's wrong in 0.19.
The realthunder
logs are from realthunder's fork of FreeCAD 0.20. If you'd like me to try the mainline version of FreeCAD 0.20 , I can.
Well, we need to get logging working properly -- without it, it's impossible to tell what is going on. None of the logs above look like the log level is set -- can you verify that Edit->Preferences->General->Output window has the top four boxes checked? When you start up the Addon Manager with the Report View showing, you should see the GitHub message of the day displayed.
This had no effect.
I only point it out because that's the reason @KeithSloan pinged me on this: I rewrote a large part of the Addon Manager in 0.20. If you aren't using the version of the AM I worked on, I'm of no use to you 😃
In your AM, do you see a "Settings" button in the upper right corner?
No, I see a "Configure" button.
Also, the second set of logs (realthunderLog
and realthunderLog2
) are both from realthunder's fork of FreeCAD 0.20.
If you see a "Configure" button (sorry, I misremembered the old text) you are using an old version of the AM: so we're back to "I'm no use to you" 😄 .
Since my previous post I have reinstalled ubuntu for unrelated reasons(Ubuntu 21.10 is close to EOL, and for reasons I won't go into, I was unable to go through the update process). I am now on Ubuntu 22.04.
I still have the same issue, and I have uploaded an additional 2 logs, both on fresh installs of Freecad. Neither seems to have any logs relating to addon manager, but it would be impossible for the session not to have been one where I opened addon manager and attempted to install Import Nurbs, because all three sessions since installing Freecad I have attempted to install the plugin.
I did so previously at the suggestion of @KeithSloan, and he was similarly surprised by the lack of relevant information in logs. This was in KeithSloan/ImportNURBS#10.