xbian

## Dockerfile
FROM node:4.3.2

##Based on
MAINTAINER Tony Hirst


RUN apt-get clean -y && apt-get -y update && apt-get -y upgrade && \
  apt-get -y update && apt-get install -y wget ant unzip openjdk-7-jdk  && \
 	apt-get clean -y


## HowToOTG.md

      
              1 file
            
          
              86 forks
            
          
              103 comments
            
          
              665 stars
            
          
                gbaman
                / HowToOTG.md
            
            
              Last active
              July 19, 2024 11:47
            
              
                Simple guide for setting up OTG modes on the Raspberry Pi Zero
              
          
    Raspberry Pi Zero OTG Mode

Simple guide for setting up OTG modes on the Raspberry Pi Zero - By Andrew Mulholland (gbaman).
The Raspberry Pi Zero (and model A and A+) support USB On The Go, given the processor is connected directly to the USB port, unlike on the B, B+ or Pi 2 B, which goes via a USB hub.

Because of this, if setup to, the Pi can act as a USB slave instead, providing virtual serial (a terminal), virtual ethernet, virtual mass storage device (pendrive) or even other virtual devices like HID, MIDI, or act as a virtual webcam!

It is important to note that, although the model A and A+ can support being a USB slave, they are missing the ID pin (is tied to ground internally) so are unable to dynamically switch between USB master/slave mode. As such, they default to USB master mode. There is no easy way to change this right now.

It is also important to note, that a USB to UART serial adapter is not needed for any of these guides, as may be documented elsewhere across the int

  
## index_hs_temps_multi.php
<!DOCTYPE HTML>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<title>Upwey Temperatures</title>
</head>
<script type="text/javascript" src="/javascript/jquery_1.8.2/jquery.min.js"></script>
<script src="http://code.highcharts.com/stock/highstock.js"></script>
<script src="http://code.highcharts.com/stock/modules/exporting.js"></script>
<script type="text/javascript">

## json_hs_temps.php
<?php
$path = $_SERVER['DOCUMENT_ROOT'];
$path .= "/dbconnection/temperature_dbinfo.php";
require($path);

$interval = $_GET['interval'];
$location = $_GET['location'];

$con = mysql_connect($mysqlserver,$username,$password);

## gist:4388108
<?php
  header("Cache-Control: no-cache, must-revalidate");
	header("Expires: Sat, 26 Jul 1997 05:00:00 GMT");
	header("Pragma: no-cache");

	function human_filesize($bytes, $decimals = 2) {
		$sz = 'BKMGTP';
		$factor = floor((strlen($bytes) - 1) / 3);
		return sprintf("%.{$decimals}f", $bytes / pow(1024, $factor)) . @$sz[$factor];
	}
	FROM node:4.3.2

	##Based on
	MAINTAINER Tony Hirst


	RUN apt-get clean -y && apt-get -y update && apt-get -y upgrade && \
	apt-get -y update && apt-get install -y wget ant unzip openjdk-7-jdk && \
	apt-get clean -y
	<!DOCTYPE HTML>
	<html>
	<head>
	<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
	<title>Upwey Temperatures</title>
	</head>
	<script type="text/javascript" src="/javascript/jquery_1.8.2/jquery.min.js"></script>
	<script src="http://code.highcharts.com/stock/highstock.js"></script>
	<script src="http://code.highcharts.com/stock/modules/exporting.js"></script>
	<script type="text/javascript">
	<?php
	$path = $_SERVER['DOCUMENT_ROOT'];
	$path .= "/dbconnection/temperature_dbinfo.php";
	require($path);

	$interval = $_GET['interval'];
	$location = $_GET['location'];

	$con = mysql_connect($mysqlserver,$username,$password);
	<?php
	header("Cache-Control: no-cache, must-revalidate");
	header("Expires: Sat, 26 Jul 1997 05:00:00 GMT");
	header("Pragma: no-cache");

	function human_filesize($bytes, $decimals = 2) {
	$sz = 'BKMGTP';
	$factor = floor((strlen($bytes) - 1) / 3);
	return sprintf("%.{$decimals}f", $bytes / pow(1024, $factor)) . @$sz[$factor];
	}