Last active
October 5, 2017 13:18
-
-
Save yamori813/a364a2ba974a758cd3e20ab667f2dc88 to your computer and use it in GitHub Desktop.
IDT FDT
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
FDT DTB at: 0x8034b200 | |
CPU clock: 150MHz | |
Timer clock: 150MHz | |
UART clock: 150MHz | |
U-Boot args (from 0 args): | |
None | |
Environment: | |
memsize=16 | |
initrd_start=0xA0000000 | |
initrd_size=0x0 | |
flash_start=0xBFC00000 | |
flash_size=0x400000 | |
entry: mips_init() | |
RAM size: 16MB (from FDT) | |
Cache info: | |
picache_stride = 0 | |
picache_loopcount = 0 | |
pdcache_stride = 0 | |
pdcache_loopcount = 0 | |
max line size = 0 | |
cpu0: Unknown cid 0 processor v0.24 | |
MMU: Standard TLB, 0 entries | |
L1 i-cache: disabled L1 d-cache: disabled L2 cache: disabled | |
Physical memory chunk(s): | |
0x3a2000 - 0xffffff, 12967936 bytes (3166 pages) | |
Maxmem is 0x1000000 | |
KDB: debugger backends: ddb | |
KDB: current backend: ddb | |
Copyright (c) 1992-2017 The FreeBSD Project. | |
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 | |
The Regents of the University of California. All rights reserved. | |
FreeBSD is a registered trademark of The FreeBSD Foundation. | |
FreeBSD 12.0-CURRENT #130 e3c786b(zrouter)-dirty: Thu Oct 5 22:16:22 JST 2017 | |
hiroki@microserver:/storage/home/hiroki/obj/storage/home/hiroki/zrouter/tmp/ | |
mips.mipsel/storage/home/hiroki/freebsd/sys/IOData_WN_G54AXP mips | |
gcc version 4.2.1 20070831 patched [FreeBSD] | |
Preloaded elf kernel "kernel" at 0x80398ed0. | |
real memory = 16777216 (16384K bytes) | |
Physical memory chunk(s): | |
0x0042e000 - 0x00f8afff, 11915264 bytes (2909 pages) | |
avail memory = 11620352 (11MB) | |
arc4random: no preloaded entropy cache | |
mem: <memory> | |
null: <full device, null device, zero device> | |
openfirm: <Open Firmware control device> | |
nexus0: <MIPS32 root nexus> | |
random: harvesting attach, 8 bytes (4 bits) from nexus0 | |
ofwbus0: <Open Firmware Device Tree> on nexus0 | |
simplebus0: <Flattened device tree simple bus> on ofwbus0 | |
memctl0: <IDT RC32300 Memory Controller> mem 0x200-0x2ff on simplebus0 | |
random: harvesting attach, 8 bytes (4 bits) from memctl0 | |
random: harvesting attach, 8 bytes (4 bits) from simplebus0 | |
random: harvesting attach, 8 bytes (4 bits) from ofwbus0 | |
cpupic0: <MIPS32 Interrupt Controller> on ofwbus0 | |
random: harvesting attach, 8 bytes (4 bits) from cpupic0 | |
pic0: <IDT RC32300 Expansion Interrupt Controller> mem 0x500-0x5ff irq 2 on simp | |
lebus0 | |
random: harvesting attach, 8 bytes (4 bits) from pic0 | |
cpulist0: <Open Firmware CPU Group> on ofwbus0 | |
random: harvesting attach, 8 bytes (4 bits) from cpulist0 | |
uart0: <Non-standard ns8250 class UART with FIFOs> mem 0x800-0x81f irq 0 on simp | |
lebus0 | |
uart0: console (114329,n,8,1) | |
uart0: fast interrupt | |
uart0: PPS capture mode: DCD | |
random: harvesting attach, 8 bytes (4 bits) from uart0 | |
uart1: <Non-standard ns8250 class UART with FIFOs> mem 0x820-0x83f irq 1 on simp | |
lebus0 | |
uart1: fast interrupt | |
uart1: PPS capture mode: DCD | |
random: harvesting attach, 8 bytes (4 bits) from uart1 | |
pcib0: <IDT RC32300 PCI Interface Controller> mem 0x18002000-0x18002fff,0x188000 | |
00-0x188fffff,0x40000000-0x4fffffff,0x60000000-0x6fffffff,0x18c00000-0x18ffffff | |
on ofwbus0 | |
pci0: <PCI bus> on pcib0 | |
pci0: domain=0, physical bus=0 | |
found-> vendor=0x111d, dev=0x0000, revid=0x01 | |
domain=0, bus=0, slot=0, func=0 | |
class=00-00-00, hdrtype=0x00, mfdev=0 | |
cmdreg=0x0157, statreg=0x0000, cachelnsz=0 (dwords) | |
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) | |
map[10]: type Prefetchable Memory, range 32, base 0, size 28, enabled | |
map[18]: type I/O Port, range 32, base 0, size 8, enabled | |
found-> vendor=0x1260, dev=0x3890, revid=0x01 | |
domain=0, bus=0, slot=2, func=0 | |
class=02-80-00, hdrtype=0x00, mfdev=0 | |
cmdreg=0x0006, statreg=0x0298, cachelnsz=8 (dwords) | |
lattimer=0x80 (3840 ns), mingnt=0x0a (2500 ns), maxlat=0x1c (7000 ns) | |
intpin=a, irq=0 | |
powerspec 1 supports D0 D1 D2 D3 current D0 | |
map[10]: type Memory, range 32, base 0x18c00000, size 13, enabled | |
pcib0: could not route pin 1 for device 2.0 1000 | |
found-> vendor=0x10ec, dev=0x8139, revid=0x10 | |
domain=0, bus=0, slot=4, func=0 | |
class=02-00-00, hdrtype=0x00, mfdev=0 | |
cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords) | |
lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) | |
intpin=a, irq=255 | |
map[10]: type I/O Port, range 32, base 0x1000, size 8, enabled | |
pci0: pci0:0:4:0 bar 0x10 failed to allocate | |
map[14]: type Memory, range 32, base 0x18c02000, size 8, enabled | |
pci0: <old, non-VGA display device> at device 0.0 (no driver attached) | |
pci0: <network> at device 2.0 (no driver attached) | |
rl0: <RealTek 8139 10/100BaseTX> mem 0x18c02000-0x18c020ff at device 4.0 on pci0 | |
rl0: Lazy allocation of 0x100 bytes rid 0x10 type 4 at 0x18800000 | |
miibus0: <MII bus> on rl0 | |
rlphy0: <RealTek internal media interface> PHY 0 on miibus0 | |
rlphy0: OUI 0x000000, model 0x0000, rev. 0 | |
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto | |
random: harvesting attach, 8 bytes (4 bits) from rlphy0 | |
random: harvesting attach, 8 bytes (4 bits) from miibus0 | |
rl0: Ethernet address: 00:60:b3:00:00:01 | |
random: harvesting attach, 8 bytes (4 bits) from rl0 | |
random: harvesting attach, 8 bytes (4 bits) from pci0 | |
random: harvesting attach, 8 bytes (4 bits) from pcib0 | |
cfi0: <Intel/Sharp - 4MB> mem 0x1fc00000-0x1fffffff on ofwbus0 | |
cfi0: [32x128KB] | |
cfid0 on cfi0 | |
random: harvesting attach, 8 bytes (4 bits) from cfid0 | |
random: harvesting attach, 8 bytes (4 bits) from cfi0 | |
clock0: <Generic MIPS32 ticker> on nexus0 | |
Timecounter "MIPS32" frequency 150000000 Hz quality 800 | |
Event timer "MIPS32" frequency 150000000 Hz quality 800 | |
random: harvesting attach, 8 bytes (4 bits) from clock0 | |
Device configuration finished. | |
Timecounters tick every 10.000 msec | |
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 512 | |
GEOM: new disk cfid0 | |
Trying to mount root from cd9660:/dev/map/rootfs.uzip []... | |
cfid0: slice 00000000-0002ffff: Bootloader (191KB) | |
cfid0: slice 00030000-0003ffff: Config (63KB) | |
cfid0: slice 00040000-0004ffff: Factory (63KB) | |
cfid0: slice 00050000-0013ffff: kernel (959KB) | |
cfid0: slice 00140000-003fffff: rootfs (2815KB) | |
cfid0: slice 00050000-003fffff: upgrade (3775KB) | |
MAP: No valid partition found at cfid0 | |
MAP: No valid partition found at cfid0s.Bootloader | |
MAP: No valid partition found at cfid0s.Config | |
MAP: No valid partition found at cfid0s.Factory | |
MAP: No valid partition found at cfid0s.kernel | |
MAP: No valid partition found at cfid0s.rootfs | |
MAP: No valid partition found at cfid0s.upgrade | |
mountroot: waiting for device /dev/map/rootfs.uzip... | |
Mounting from cd9660:/dev/map/rootfs.uzip failed with error 19. | |
Loader variables: | |
Manual root filesystem specification: | |
<fstype>:<device> [options] | |
Mount <device> using filesystem <fstype> | |
and with the specified (optional) option list. | |
eg. ufs:/dev/da0s1a | |
zfs:tank | |
cd9660:/dev/cd0 ro | |
(which is equivalent to: mount -t cd9660 -o ro /dev/cd0 /) | |
? List valid disk boot devices | |
. Yield 1 second (for background tasks) | |
<empty line> Abort manual input | |
mountroot> |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment