Created
October 17, 2018 02:47
-
-
Save yamori813/aad6abc78b68a9e19a8563944d32033b to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Starting kernel ... | |
CPU platform: Atheros AR7241 rev 1 | |
CPU Frequency=400 MHz | |
CPU DDR Frequency=400 MHz | |
CPU AHB Frequency=200 MHz | |
platform frequency: 400 MHz | |
CPU reference clock: 5 MHz | |
CPU MDIO clock: 5 MHz | |
arguments: | |
a0 = 00000007 | |
a1 = a3f6bfb0 | |
a2 = a3f6c460 | |
a3 = 00000004 | |
Cmd line:argv is invalid | |
Environment: | |
envp is invalid | |
Cache info: | |
picache_stride = 4096 | |
picache_loopcount = 16 | |
pdcache_stride = 4096 | |
pdcache_loopcount = 8 | |
max line size = 32 | |
Physical memory chunk(s): | |
0x3b0000 - 0x3ffffff, 63242240 bytes (15440 pages) | |
Maxmem is 0x4000000 | |
---<<BOOT>>--- | |
Copyright (c) 1992-2018 The FreeBSD Project. | |
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 | |
The Regents of the University of California. All rights reserved. | |
FreeBSD is a registered trademark of The FreeBSD Foundation. | |
FreeBSD 12.0-ALPHA8 #18 63abccd(zrouter)-dirty: Wed Oct 17 11:41:45 JST 2018 | |
hiroki@microserver:/storage/home/hiroki/zorg/obj/storage/home/hiroki/zorg/ZRouter/tmp/storage/home/hiroki/freebsd/mips.mips/sys/Nec_WR8170N mips | |
gcc version 4.2.1 20070831 patched [FreeBSD] | |
Preloaded elf kernel "kernel" at 0x803a9af0. | |
CPU model: Atheros AR7241 rev 1 | |
cpu0: MIPS Technologies processor v116.147 | |
MMU: Standard TLB, 16 entries (4K 16K 64K 256K 1M 16M 64M 256M pg sizes) | |
L1 i-cache: 4 ways of 512 sets, 32 bytes per line | |
L1 d-cache: 4 ways of 256 sets, 32 bytes per line | |
L2 cache: disabled | |
Config1=0x9ee3519e<PerfCount,WatchRegs,MIPS16,EJTAG> | |
Config2=0x80000000 | |
Config3=0x20 | |
real memory = 67108864 (65536K bytes) | |
Physical memory chunk(s): | |
0x00444000 - 0x03ef1fff, 61530112 bytes (15022 pages) | |
avail memory = 60715008 (57MB) | |
arc4random: no preloaded entropy cache | |
ULE: setup cpu 0 | |
random: entropy device external interface | |
mem: <memory> | |
null: <full device, null device, zero device> | |
nexus0: <MIPS32 root nexus> | |
argemdio0: <Atheros AR71xx built-in ethernet interface, MDIO controller> at mem 0x19000000-0x19000fff on nexus0 | |
mdio0: <MDIO> on argemdio0 | |
mdioproxy0: <MII/MDIO proxy, MDIO side> on mdio0 | |
clock0: <Generic MIPS32 ticker> on nexus0 | |
Timecounter "MIPS32" frequency 200000000 Hz quality 800 | |
Event timer "MIPS32" frequency 200000000 Hz quality 800 | |
argemdio1: <Atheros AR71xx built-in ethernet interface, MDIO controller> at mem 0x1a000000-0x1a000fff on nexus0 | |
mdio1: <MDIO> on argemdio1 | |
mdioproxy1: <MII/MDIO proxy, MDIO side> on mdio1 | |
arswitch0: <Atheros AR9340 Ethernet Switch (ver 0 rev 0)> on mdio1 | |
arswitch0: ar9340_hw_global_setup: GMII | |
arswitch0: ar9340_hw_global_setup: PHY4 - CPU | |
miibus0: <MII bus> on arswitch0 | |
ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0 | |
ukphy0: OUI 0x00c82e, model 0x0004, rev. 1 | |
ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto | |
miibus1: <MII bus> on arswitch0 | |
ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1 | |
ukphy1: OUI 0x00c82e, model 0x0004, rev. 1 | |
ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto | |
miibus2: <MII bus> on arswitch0 | |
ukphy2: <Generic IEEE 802.3u media interface> PHY 2 on miibus2 | |
ukphy2: OUI 0x00c82e, model 0x0004, rev. 1 | |
ukphy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto | |
miibus3: <MII bus> on arswitch0 | |
ukphy3: <Generic IEEE 802.3u media interface> PHY 3 on miibus3 | |
ukphy3: OUI 0x00c82e, model 0x0004, rev. 1 | |
ukphy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto | |
mdio2: <MDIO> on arswitch0 | |
mdioproxy2: <MII/MDIO proxy, MDIO side> on mdio2 | |
etherswitch0: <Switch controller> on arswitch0 | |
apb0 at irq 4 on nexus0 | |
uart0: <16550 or compatible> at mem 0x18020003-0x1802001a irq 3 on apb0 | |
uart0: console (115200,n,8,1) | |
uart0: fast interrupt | |
uart0: PPS capture mode: DCD | |
gpio0: <Atheros AR71XX GPIO driver> at mem 0x18040000-0x18040fff irq 2 on apb0 | |
gpio0: [GIANT-LOCKED] | |
gpio0: function_set: 0x1 | |
gpio0: function_clear: 0x4 | |
gpio0: gpio pinmask=0xc19c3 | |
gpiobus0: <GPIO bus> on gpio0 | |
gpioc0: <GPIO controller> on gpio0 | |
arge0: <Atheros AR71xx built-in ethernet interface> at mem 0x19000000-0x19000fff irq 2 on nexus0 | |
arge0: Generating random ethernet address. | |
miiproxy0: <MII/MDIO proxy, MII side> on arge0 | |
miiproxy0: attached to target mdio2 | |
arge0: finishing attachment, phymask 0010, proxy set | |
miibus4: <MII bus> on miiproxy0 | |
ukphy4: <Generic IEEE 802.3u media interface> PHY 4 on miibus4 | |
ukphy4: OUI 0x00c82e, model 0x0004, rev. 1 | |
ukphy4: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto | |
arge0: bpf attached | |
arge0: Ethernet address: 62:73:64:f8:7c:3f | |
arge1: <Atheros AR71xx built-in ethernet interface> at mem 0x1a000000-0x1a000fff irq 3 on nexus0 | |
arge1: arge_attach: overriding MII mode to 'GMII' | |
arge1: Generating random ethernet address. | |
ar71xx_chip_set_mii_if: invalid MII mode (1) for unit 1 | |
mii_attach_proxy: not attaching, no mdio device hint for arge1 | |
arge1: finishing attachment, phymask 0000, proxy null | |
arge1: bpf attached | |
arge1: Ethernet address: 62:73:64:a9:21:1e | |
ehci0: <AR71XX Integrated USB 2.0 controller> at mem 0x1b000100-0x1bffffff irq 1 on nexus0 | |
usbus0: EHCI version 1.0 | |
usbus0 on ehci0 | |
ehci0: usbpf: Attached | |
spi0: <AR71XX SPI> at mem 0x1f000000-0x1fffffff on nexus0 | |
spibus0: <SPI bus> on spi0 | |
mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0 | |
mx25l0: device type mx25ll64, size 8192K in 128 sectors of 64K, erase size 64K | |
ar71xx_wdog0: <Atheros AR71XX watchdog timer> on nexus0 | |
ar71xx_wdog0: Previous reset was due to watchdog timeout | |
Device configuration finished. | |
Timecounters tick every 10.000 msec | |
lo0: bpf attached | |
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 1024 | |
arswitch0port1: link state changed to DOWN | |
arswitch0port2: link state changed to DOWN | |
arswitch0port3: link state changed to DOWN | |
arswitch0port4: link state changed to DOWN | |
GEOM: new disk flash/spi0 | |
MAP: flash/spi0: 0x40000, data=0x40000 "/dev/map/uboot" | |
MAP: flash/spi0: 40000x10000, data=0x10000 "/dev/map/uboot_environ" | |
MAP: flash/spi0: 50000x7a0000, data=0x7a0000 "/dev/map/upgrade" | |
MAP: search flash/spi0 for key ".!/bin/sh" from 0x100000, step 0x10000 | |
usbus0: 480Mbps High Speed USB v2.0 | |
Trying to mount root from cd9660:/dev/map/rootfs.uzip []... | |
ugen0.1: <Atheros EHCI root HUB> at usbus0 | |
uhub0: <Atheros EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 | |
MAP: flash/spi0: 50000x100000, data=0x100000 "/dev/map/kernel" | |
MAP: search flash/spi0 for key ".!/bin/sh" from 0x100000, step 0x10000 | |
MAP: flash/spi0: 150000x690000, data=0x690000 "/dev/map/rootfs" | |
MAP: flash/spi0: 7f0000x10000, data=0x10000 "/dev/map/ART" | |
MAP: No valid partition found at map/rootfs.uzip | |
cd9660: RockRidge Extension | |
Warning: no time-of-day clock registered, system time will not be set accurately | |
start_init: trying /sbin/init | |
uhub0: 1 port with 1 removable, self powered | |
gpio_pin_set_flags: Invalid argument | |
kenv: unable to get HostName | |
kern.coredump: 1 -> 0 | |
net.inet.ip.forwarding: 0 -> 1 | |
memory disk size = 10m | |
MAP: No valid partition found at md0 | |
random: unblocking device. | |
MAP: No valid partition found at md0 | |
lo0: link state changed to UP | |
Thu Jan 1 00:00:35 UTC 1970 | |
login: |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment