Skip to content

Instantly share code, notes, and snippets.

@yamori813
Last active April 10, 2017 04:57
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save yamori813/ebb3147d78b6c375dfe12f782f6308f8 to your computer and use it in GitHub Desktop.
Save yamori813/ebb3147d78b6c375dfe12f782f6308f8 to your computer and use it in GitHub Desktop.
Planex_MZK-W04N-XX
Starting kernel ...
FDT DTB at: 0x882c7980
CPU clock: 266MHz
Timer clock: 133MHz
UART clock: 133MHz
U-Boot args (from 0 args):
None
Environment:
entry: mips_init()
RAM size: 32MB (assumed)
Cache info:
picache_stride = 4096
picache_loopcount = 4
pdcache_stride = 4096
pdcache_loopcount = 4
max line size = 16
cpu0: MIPS Technologies processor v108.144
MMU: Standard TLB, 16 entries (4K 16K 64K 256K 1M 16M 64M 256M pg sizes)
L1 i-cache: 4 ways of 256 sets, 16 bytes per line
L1 d-cache: 4 ways of 256 sets, 16 bytes per line
L2 cache: disabled
Config1=0x9e9b4d86<MIPS16,EJTAG>
Config2=0x80000000
Config3=0x20
Physical memory chunk(s):
0x8328000 - 0x9ffffff, 30244864 bytes (7384 pages)
Maxmem is 0xa000000
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-CURRENT #35 880ce92(zrouter)-dirty: Mon Apr 10 13:39:07 JST 2017
hiroki@microserver:/storage/home/hiroki/obj/storage/home/hiroki/zrouter/tmp/
mips.mipsel/storage/home/hiroki/freebsd/sys/Planex_MZK-W04N-XX mips
gcc version 4.2.1 20070831 patched [FreeBSD]
Preloaded elf kernel "kernel" at 0x8831bb60.
real memory = 33554432 (32768K bytes)
Physical memory chunk(s):
0x083b4000 - 0x09f41fff, 28893184 bytes (7054 pages)
avail memory = 28454912 (27MB)
ULE: setup cpu 0
random: entropy device external interface
null: <full device, null device, zero device>
openfirm: <Open Firmware control device>
mem: <memory>
nexus0: <MIPS32 root nexus>
random: harvesting attach, 8 bytes (4 bits) from nexus0
ofwbus0: <Open Firmware Device Tree> on nexus0
palmbus0: <MTK Palmbus> mem 0x300000-0x4fffff on ofwbus0
random: harvesting attach, 8 bytes (4 bits) from palmbus0
random: harvesting attach, 8 bytes (4 bits) from ofwbus0
cpupic0: <MIPS32 Interrupt Controller> on ofwbus0
random: harvesting attach, 8 bytes (4 bits) from cpupic0
sysc0: <MTK System Controller> mem 0-0xff on palmbus0
random: harvesting attach, 8 bytes (4 bits) from sysc0
pinctrl0: <MTK Pin Controller> on ofwbus0
pinctrl0: GPIO mode start: 0x00000002
Processing 1 pin-config node(s) in pinctrl-0 for pinctrl
pinctrl0: GPIO mode end : 0x00000002
random: harvesting attach, 8 bytes (4 bits) from pinctrl0
rstctrl0: <MTK Reset Controller> on ofwbus0
random: harvesting attach, 8 bytes (4 bits) from rstctrl0
clkctrl0: <MTK Clock Controller> on ofwbus0
random: harvesting attach, 8 bytes (4 bits) from clkctrl0
intc0: <MTK Interrupt Controller (v2)> mem 0x200-0x2ff irq 3 on palmbus0
random: harvesting attach, 8 bytes (4 bits) from intc0
gpio0: <MTK GPIO Controller (v1)> mem 0x600-0x633 irq 4 on palmbus0
gpiobus0: <OFW GPIO bus> on gpio0
random: harvesting attach, 8 bytes (4 bits) from gpiobus0
random: harvesting attach, 8 bytes (4 bits) from gpio0
cpulist0: <Open Firmware CPU Group> on ofwbus0
random: harvesting attach, 8 bytes (4 bits) from cpulist0
palmbus0: <timer@100> mem 0x100-0x11f irq 2 disabled compat ralink,rt2880-timer
(no driver attached)
palmbus0: <watchdog@120> mem 0x120-0x12f compat ralink,rt2880-wdt (no driver att
ached)
palmbus0: <memc@300> mem 0x300-0x3ff compat ralink,rt2880-memc (no driver attach
ed)
gpioc0: <GPIO controller> on gpio0
random: harvesting attach, 8 bytes (4 bits) from gpioc0
palmbus0: <gpio@638> mem 0x638-0x65b disabled compat ralink,rt2880-gpio (no driv
er attached)
palmbus0: <gpio@660> mem 0x660-0x683 disabled compat ralink,rt2880-gpio (no driv
er attached)
uart0: <MTK UART Controller> mem 0xc00-0xcff irq 5 on palmbus0
uart0: console (57870,n,8,1)
uart0: fast interrupt
uart0: PPS capture mode: DCD
random: harvesting attach, 8 bytes (4 bits) from uart0
rt0: <Ralink RT2880 onChip Ethernet driver> mem 0x400000-0x40ffff irq 0 disabled
on ofwbus0
rt0: RT305XF Ethernet MAC (rev 0x00000000)
rt0: use hardcoded 00:18:e7:d5:83:90 macaddr
rt0: bpf attached
rt0: Ethernet address: 00:18:e7:d5:83:90
random: harvesting attach, 8 bytes (4 bits) from rt0
rtmdio0: <FV built-in ethernet interface, MDIO controller> mem 0x400000-0x40ffff
on ofwbus0
mdio0: <MDIO> on rtmdio0
ip17x0: <IC+ IP17x switch driver> on mdio0
ip17x0: MII: 90f0
ip17x0: type: IP175C
miibus0: <MII bus> on ip17x0
ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0
ukphy0: OUI 0x0009c3, model 0x0018, rev. 0
ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
random: harvesting attach, 8 bytes (4 bits) from ukphy0
random: harvesting attach, 8 bytes (4 bits) from miibus0
miibus1: <MII bus> on ip17x0
ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1
ukphy1: OUI 0x0009c3, model 0x0018, rev. 0
ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
random: harvesting attach, 8 bytes (4 bits) from ukphy1
random: harvesting attach, 8 bytes (4 bits) from miibus1
miibus2: <MII bus> on ip17x0
ukphy2: <Generic IEEE 802.3u media interface> PHY 2 on miibus2
ukphy2: OUI 0x0009c3, model 0x0018, rev. 0
ukphy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
random: harvesting attach, 8 bytes (4 bits) from ukphy2
random: harvesting attach, 8 bytes (4 bits) from miibus2
miibus3: <MII bus> on ip17x0
ukphy3: <Generic IEEE 802.3u media interface> PHY 3 on miibus3
ukphy3: OUI 0x0009c3, model 0x0018, rev. 0
ukphy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
random: harvesting attach, 8 bytes (4 bits) from ukphy3
random: harvesting attach, 8 bytes (4 bits) from miibus3
miibus4: <MII bus> on ip17x0
ukphy4: <Generic IEEE 802.3u media interface> PHY 4 on miibus4
ukphy4: OUI 0x0009c3, model 0x0018, rev. 0
ukphy4: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
random: harvesting attach, 8 bytes (4 bits) from ukphy4
random: harvesting attach, 8 bytes (4 bits) from miibus4
miibus5: <MII bus> on ip17x0
ukphy5: <Generic IEEE 802.3u media interface> PHY 5 on miibus5
ukphy5: OUI 0x78d07a, model 0x0002, rev. 13
ukphy5: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
random: harvesting attach, 8 bytes (4 bits) from ukphy5
random: harvesting attach, 8 bytes (4 bits) from miibus5
etherswitch0: <Switch controller> on ip17x0
random: harvesting attach, 8 bytes (4 bits) from etherswitch0
random: harvesting attach, 8 bytes (4 bits) from ip17x0
mdioproxy0: <MII/MDIO proxy, MDIO side> on mdio0
random: harvesting attach, 8 bytes (4 bits) from mdioproxy0
random: harvesting attach, 8 bytes (4 bits) from mdio0
random: harvesting attach, 8 bytes (4 bits) from rtmdio0
ofwbus0: <wmac@480000> mem 0x480000-0x4bffff irq 1 compat ralink,rt2880-wmac (no
driver attached)
cfi0: <AMD/Fujitsu - 4MB> mem 0x1f000000-0x1f7fffff on ofwbus0
cfi0: [8x8KB,63x64KB]
cfid0 on cfi0
random: harvesting attach, 8 bytes (4 bits) from cfid0
random: harvesting attach, 8 bytes (4 bits) from cfi0
gpioled0: <GPIO LEDs> on ofwbus0
random: harvesting attach, 8 bytes (4 bits) from gpioled0
ofwbus0: <gpio-keys-polled> compat gpio-keys-polled (no driver attached)
ofwbus0: <ip17x@0> compat icplus,ip17x (no driver attached)
clock0: <Generic MIPS32 ticker> on nexus0
Timecounter "MIPS32" frequency 133333333 Hz quality 800
Event timer "MIPS32" frequency 133333333 Hz quality 800
random: harvesting attach, 8 bytes (4 bits) from clock0
Device configuration finished.
Timecounters tick every 10.000 msec
vlan: initialized, using hash tables with chaining
lo0: bpf attached
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 512
ip17x0port0: link state changed to DOWN
ip17x0port1: link state changed to DOWN
ip17x0port2: link state changed to DOWN
ip17x0port3: link state changed to DOWN
ip17x0port4: link state changed to DOWN
ip17x0port5: link state changed to UP
GEOM: new disk cfid0
Trying to mount root from cd9660:cfid0s.rootfs.uzip []...
cfid0: slice 00000000-0002ffff: Bootloader (191KB)
cfid0: slice 00030000-0003ffff: Config (63KB)
cfid0: slice 00040000-0004ffff: Factory (63KB)
cfid0: slice 00050000-0013ffff: kernel (959KB)
cfid0: slice 00140000-003fffff: rootfs (2815KB)
cfid0: slice 00050000-003fffff: upgrade (3775KB)
MAP: No valid partition found at cfid0
MAP: No valid partition found at cfid0s.Bootloader
MAP: No valid partition found at cfid0s.Config
MAP: No valid partition found at cfid0s.Factory
MAP: No valid partition found at cfid0s.kernel
MAP: No valid partition found at cfid0s.rootfs
MAP: No valid partition found at cfid0s.upgrade
MAP: No valid partition found at cfid0s.rootfs.uzip
cd9660: RockRidge Extension
warning: no time-of-day clock registered, system time will not be set accurately
start_init: trying /sbin/init
kenv: unable to get HostName
kern.coredump: 1 -> 0
net.inet.ip.forwarding: 0 -> 1
memory disk size = 10m
MAP: No valid partition found at md0
random: unblocking device.
MAP: No valid partition found at md0
Thu Jan 1 00:00:21 UTC 1970
login:
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment