gistfile1.txt

Marvell>> tftpboot 400100 Buffalo_WZR-AMPG300NH_kernel.kbin
Using egiga0 device
TFTP from server 10.10.10.3; our IP address is 10.10.10.108
Filename 'Buffalo_WZR-AMPG300NH_kernel.kbin'.
Load address: 0x400100
Loading: #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         ##########################################
done
Bytes transferred = 2876964 (2be624 hex)
Marvell>> go 0x400100
## Starting application at 0x00400100 ...
CPU window#0: address 0x00780000 is not aligned to 0xfb3a63c0
WARNING: could not re-initialise decode windows! Running with existing settings.
..
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-CURRENT #27 212bfe3(zrouter)-dirty: Tue Apr  4 15:53:15 JST 2017
    hiroki@microserver:/storage/home/hiroki/obj/storage/home/hiroki/zrouter/tmp/
arm.arm/storage/home/hiroki/freebsd/sys/Buffalo_WZR-AMPG300NH arm
FreeBSD clang version 4.0.0 (tags/RELEASE_400/final 297347) (based on LLVM 4.0.0
)
CPU: ARM926EJ-S rev 0 (ARM9EJ-S core)
  Little-endian DC enabled IC enabled WB enabled LABT branch prediction disabled
  32KB/32B 1-way instruction cache
  32KB/32B 1-way write-back-locking-C data cache
real memory  = 33550336 (31 MB)
avail memory = 28229632 (26 MB)
SOC: Marvell 88F5181 rev B1, TClock 166MHz
  Instruction cache prefetch disabled, data cache prefetch disabled
random: entropy device external interface
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
localbus0: <Marvell device bus> on ofwbus0
ic0: <Marvell Integrated Interrupt Controller> mem 0x20200-0x2023b on simplebus0
timer0: <Marvell CPU Timer> mem 0x20300-0x2032f irq 0 on simplebus0
Event timer "CPUTimer0" frequency 166666667 Hz quality 1000
Timecounter "CPUTimer1" frequency 166666667 Hz quality 1000
gpio0: <Marvell Integrated GPIO Controller> mem 0x10100-0x1011f irq 6,7,8,9 on s
implebus0
mge0: <Marvell Gigabit Ethernet controller> mem 0x72000-0x73fff irq 18,19,20,21,
22 on simplebus0
mge0: PHY not attached.
mge0: Ethernet address: 00:1d:73:22:21:3e
uart0: <16550 or compatible> mem 0x12000-0x1201f irq 3 on simplebus0
uart0: console (1280,n,8,1)
uart1: <16550 or compatible> mem 0x12100-0x1211f irq 4 on simplebus0
mgemdio0: <Marvell Gigabit Ethernet interface, MDIO controller> mem 0x72000-0x73
fff on simplebus0
mdio0: <MDIO> on mgemdio0
e6000sw0: single-chip addressing mode
e6000sw0: single-chip addressing mode
e6000sw0: <Marvell 88E6131> on mdio0
e6000sw0: port 0 7d80 03 00 1066 77 00 708 01 cf 00
e6000sw0: port 1 7080 03 00 1066 77 00 708 02 cf 00
e6000sw0: port 2 7d80 03 00 1066 77 00 708 03 cf 00
e6000sw0: port 3 6e88 33 00 1066 77 00 787 01 cf 00
e6000sw0: port 4 6086 403 00 1066 74 00 7ef 01 cf 00
e6000sw0: port 5 7086 403 00 1066 74 00 7df 01 cf 00
e6000sw0: port 6 6086 403 00 1066 74 00 7bf 01 cf 00
e6000sw0: port 7 7086 403 00 1066 77 00 708 08 cf 00
e6000sw0: port REG_GLOBAL c801 00 00 00 4080 00 00 00
e6000sw0: port REG_GLOBAL 00 00 161 00 00 00 00 00
e6000sw0: port REG_GLOBAL 00 00 5555 5555 aaaa aaaa ffff ffff
e6000sw0: port REG_GLOBAL fa41 8100 fff0 f4 00 c00 00 00
e6000sw0: port REG_GLOBAL2 00 00 00 ffff 191 f7 00 ff
e6000sw0: port REG_GLOBAL2 00 00 00 00 00 00 00 77
e6000sw0: port REG_GLOBAL2 00 00 00 00 00 00 00 00
e6000sw0: port REG_GLOBAL2 00 00 00 00 00 00 f0 00
e6000sw0: PHY at 0
miibus0: <MII bus> on e6000sw0
e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0
e1000phy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 100
0baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
e6000sw0: PHY at 1
miibus1: <MII bus> on e6000sw0
e1000phy1: <Marvell 88E1149 Gigabit PHY> PHY 1 on miibus1
e1000phy1:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 100
0baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
e6000sw0: PHY at 2
miibus2: <MII bus> on e6000sw0
e1000phy2: <Marvell 88E1149 Gigabit PHY> PHY 2 on miibus2
e1000phy2:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 100
0baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
e6000sw0: CPU port at 3
e6000sw0: PHY at 4 disable
e6000sw0: PHY at 5
miibus3: <MII bus> on e6000sw0
e1000phy3: <Marvell 88E1112 Gigabit PHY> PHY 5 on miibus3
e1000phy3:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseSX, 10
00baseSX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 
auto
e6000sw0: PHY at 6 disable
e6000sw0: PHY at 7
miibus4: <MII bus> on e6000sw0
e1000phy4: <Marvell 88E1112 Gigabit PHY> PHY 7 on miibus4
e1000phy4:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseSX, 10
00baseSX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 
auto
etherswitch0: <Switch controller> on e6000sw0
mdioproxy0: <MII/MDIO proxy, MDIO side> on mdio0
cfi0: <AMD/Fujitsu - 8MB> mem 0xff800000-0xfff7ffff on ofwbus0
cfid0 on cfi0
Timecounters tick every 10.000 msec
Trying to mount root from cd9660:/dev/cfid0s.rootfs.uzip []...
warning: no time-of-day clock registered, system time will not be set accurately
e6000sw0port0: link state changed to UP
e6000sw0port1: link state changed to DOWN
e6000sw0port2: link state changed to UP
e6000sw0port5: link state changed to DOWN
e6000sw0port7: link state changed to DOWN
/etc/rc: cannot create /dev/led/status: No such file or directory
kern.coredump: 1 -> 0
net.inet.ip.forwarding: 0 -> 1
memory disk size = 10m
random: unblocking device.
MORI MORI MGE_PORT_SERIAL_CTRL 40600
MORI MORI MGE_PORT_SERIAL_CTRL a4260e
MORI MORI MGE_PORT_SERIAL_CTRL a4260e

Thu Jan  1 09:00:28 JST 1970
/etc/rc: cannot create /dev/led/status: No such file or directory
login: