Nether quartz vs certus. Only mentioning for now.
I'd second that the border on the chiseled and pillar variations should probably be less pronounced to make them look better when stacked. The block version matches the Quartz Block. What's being compared in the image is Vanilla's "Smooth Quartz Block", while our block matches Vanilla's "Block of Quartz". - Gimpansor
I was actually inquiring about the pillar and chiseld block as the minecraft variants do not have a hard border between them. Having a transition between each block isn't actually bad. Myabe it should just be a smoother or more detailed. Also another idea would be to allow pillars to face any direction and not just align them with an axis. So players could make different pattern depending on the rotation. But that might better fit into a different block. Something like a capstone(?) for a pillar. Like a transition block between a pillar and a chiseled block.
The normal block was just there. Probably picked the wrong one. But adding a smooth certus later would be nice and probably just requires a layer removed from the certus quartz block.
Certus quartz bricks?
Would be nice ofcourse, but it's extra ;-) As an addendum to the remarks above. Extra blocks would be: "Smooth Certus Quartz Block" to match Vanilla's "Smooth Quartz Block", and "Certus Quartz Bricks" to match Vanilla's "Quartz Bricks". - Gimpansor
Just as potential addition later.
Might imo a bit too saturated. Maybe going for a certus + light green approach (cactus block)? Similar to planes or cels, but can certainly be a bit more saturated
I have no remarks here. We haven't figured out how to do indicator lights for interfaces yet however. Any ideas which area of the interface could serve as an indicator light? (Similar to the tiny indicators on parts). I'd also like your opinion on whether we should make the large blue surface area glow in the dark. - Gimpansor
I think there was the idea to change the color to a less saturated one when missing power/channels etc. Also the dark grey edges might be an idea to use as indicator. Including the color once we add the option to color machines and not just cables.
Import buses have a 1px border on their front. Storage bus and export bus does not. Looks a bit harsh from an angle in my opinion. Export bus could certainly also see an updated model with only 2 layers like the import/storage bus and not 3 increases the size of the front face by 1 px in each direction.
No particular thoughts on this other than it'd be cool to animate the blue surface area, but that's a bit much :-) - Gimpansor
Didn't consider animations. But then these are usually facing some inventory and aren't even visible. Probably a waste of time. And the normal item will be way to small to notice it.
Intentional or a flat texture missing (or am I overlooking it?)
I think the fluix part is supposed to be so substantial that it reaches all the way from the outer surface area into the inside, and I kinda like it, so no remarks from me. - Gimpansor
Mostly just asking if the outside texture should also be used on the inside. Or if there is maybe a file missing. As the model itself still used the 5 or 6 previous textures for each side.
Appears to be rotated by 90 degrees?
why? - Gimpansor
The inside. the bar has a darker gray at the bottom, while the the slots have the dark parts on the right
I really like the charger's futuristic, metallic look. So what would your thought be on making the inscriber's metallic surface more like the charger? At the same time, I really like the Fluix ring on the inscriber, so what are your thoughts on having the little "fluix charge knob" on the charger be maybe slightly larger (ring with 6px diameter), and be throgh-and-through like on the inscriber? - Gimpansor
Not sure about making the inscriber a lighter color. It can quickly look like a white plastic box and probably a bit dull.
I think the fluix parts on the charger should indicate connection points for cables. Could also be an idea to at them to the inscriber. But that will be really cluttered.
For reference how cables do connect to an inscriber now.
Source Link: https://drive.google.com/file/d/1Hy-HWI2QBFsV6xE1RoJr34UoD8o3LZdT/view?usp=sharing
It also contains 4 versions of the empty housing with different brightness.