This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
# NOTE Lines must not exceed 132 characters | |
# Robot module configurations : general handling of movement G-codes and slicing into moves | |
arm_solution linear_delta # delta | |
#--------------------------------------------------------------------------- | |
#Basic Parameters | |
#--------------------------------------------------------------------------- |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
M107 ;turn off fan | |
M104 S0 ; turn off extruder | |
M140 S0 ; turn off bed | |
;Retract and reshape the filament | |
G92 E0; Zero Extruder | |
G91; Relative Coordinates | |
G1 E-5 F10000; Fast Retract 5mm | |
G1 E2 F10000; Fast Reinsert 2mm |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
TARGETS = BLF_GT_MINI \ | |
BLF_GT \ | |
BLF_Q8 \ | |
EMISAR_D1 \ | |
EMISAR_D1S \ | |
EMISAR_D4 \ | |
EMISAR_D4S \ | |
EMISAR_D4S_219c \ | |
FF_ROT66 \ | |
FW3A \ |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
/* Astrolux S43 driver layout | |
* ---- | |
* Reset - PB5 |1 8| VCC | |
* eswitch - PB3 |2 7| PB2 - indicator led | |
* 1x7135 - PB4 |3 6| PB1 - none | |
* GND |4 5| PB0 - FET | |
* ---- | |
*/ | |
#define PWM_CHANNELS 3 |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
// BLF Q8 config options for Anduril | |
// the button lights up | |
#define USE_INDICATOR_LED | |
// the button is visible while main LEDs are on | |
#define USE_INDICATOR_LED_WHILE_RAMPING | |
// enable blinking indicator LED while off | |
#define TICK_DURING_STANDBY | |
#ifdef RAMP_LENGTH |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
2018-11-05 15:45:10,454 - octoprint.server.heartbeat - INFO - Server heartbeat <3 | |
2018-11-05 15:45:10,459 - octoprint.server - INFO - --- Log roll over detected --------------------------------------------------- | |
2018-11-05 15:45:10,460 - octoprint.server - INFO - OctoPrint 1.3.9 | |
2018-11-05 15:45:10,464 - octoprint.plugin.core - INFO - 30 plugin(s) registered with the system: | |
| Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/action_command_prompt | |
| Announcement Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/announcements | |
| Core Wizard (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/corewizard | |
| !CuraEngine (<= 15.04) (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/cura | |
| Custom Control Editor (0.2.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_customControl | |
| Detailed Progress Plugin (0.1.4) = /home/pi/oprint/local/lib/python2.7/site-packages/octo |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
2018-11-06 13:50:46,520 - octoprint.startup - INFO - ****************************************************************************** | |
2018-11-06 13:50:46,524 - octoprint.startup - INFO - Starting OctoPrint 1.3.9 | |
2018-11-06 13:50:46,524 - octoprint.startup - INFO - ****************************************************************************** | |
2018-11-06 13:50:46,614 - octoprint.util.connectivity_checker - INFO - Connectivity changed from offline to online | |
2018-11-06 13:50:46,620 - octoprint.startup - INFO - Blacklist processing done | |
2018-11-06 13:50:46,698 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... | |
2018-11-06 13:50:47,466 - octoprint.plugin.core - INFO - Plugin CuraEngine (<= 15.04) is disabled. | |
2018-11-06 13:50:50,410 - octoprint.plugin.core - INFO - Plugin Firmware Updater (0.1.0) is disabled. | |
2018-11-06 13:50:50,540 - octoprint.plugin.core - INFO - Plugin EEPROM Marlin Editor |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
#include <Arduino.h> | |
#include <ESP8266WiFi.h> | |
#include <WiFiClient.h> | |
#include "settings.h" | |
#define MQTT_MAXBUFFERSIZE 250 | |
#include "Adafruit_MQTT.h" | |
#include "Adafruit_MQTT_Client.h" |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
#include <Arduino.h> | |
#include <ESP8266WiFi.h> | |
#include <WiFiClient.h> | |
#include "ADS1115.h" | |
//#define ADS1115_SERIAL_DEBUG | |
#define MQTT_MAXBUFFERSIZE 250 | |
#include "Adafruit_MQTT.h" | |
#include "Adafruit_MQTT_Client.h" |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
// Lexel 2S config options for Anduril | |
#include "hwdef-Lexel_2S.h" | |
// ../../bin/level_calc.py 1 65 7135 1 0.8 150 | |
// ... mixed with this: | |
// ../../bin/level_calc.py 2 150 7135 4 0.33 150 FET 1 10 1500 | |
#define RAMP_LENGTH 150 | |
#define PWM1_LEVELS 1,1,2,2,3,3,4,4,5,6,7,8,9,10,12,13,14,15,17,19,20,22,24,26,29,31,34,36,39,42,45,48,51,55,59,62,66,70,75,79,84,89,93,99,104,110,115,121,127,134,140,147,154,161,168,176,184,192,200,209,217,226,236,245,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0 | |
#define PWM2_LEVELS 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,3,4,5,7,8,9,11,12,14,15,17,19,20,22,24,25,27,29,31,33,35,37,39,41,43,45,48,50,52,55 |
OlderNewer