zuzzas/debian-preseeded-iso.sh

## debian-preseeded-iso.sh
set -e

set -u

# hat-tips:
# - http://codeghar.wordpress.com/2011/12/14/automated-customized-debian-installation-using-preseed/
# - the gist

# required packages (apt-get install)
# xorriso
# syslinux

ISOFILE=debian-netinst.iso
ISOFILE_FINAL=debian-netinst-mod.iso
ISODIR=debian-iso
ISODIR_WRITE=$ISODIR-rw

# download ISO:
# wget -nc -O $ISOFILE http://cdimage.debian.org/cdimage/wheezy_di_rc3/amd64/iso-cd/debian-wheezy-DI-rc3-amd64-netinst.iso || true
wget -nc -O $ISOFILE https://cdimage.debian.org/cdimage/unofficial/non-free/cd-including-firmware/current/amd64/iso-cd/firmware-8.7.1-amd64-netinst.iso || true

echo 'mounting ISO9660 filesystem...'
# source: http://wiki.debian.org/DebianInstaller/ed/EditIso
[ -d $ISODIR ] || mkdir -p $ISODIR
sudo mount -o loop $ISOFILE $ISODIR

echo 'coping to writable dir...'
rm -rf $ISODIR_WRITE || true
[ -d $ISODIR_WRITE ] || mkdir -p $ISODIR_WRITE
rsync -a -H --exclude=TRANS.TBL $ISODIR/ $ISODIR_WRITE

echo 'unmount iso dir'
sudo umount $ISODIR

echo 'correcting permissions...'
chmod 755 -R $ISODIR_WRITE

echo 'copying preseed file...'
cp preseed.final $ISODIR_WRITE/preseed.cfg

echo 'edit isolinux/txt.cfg...'
sed 's/initrd.gz/initrd.gz file=\/cdrom\/preseed.cfg/' -i $ISODIR_WRITE/isolinux/txt.cfg

sudo mkdir irmod
cd irmod
sudo gzip -d < ../$ISODIR_WRITE/install.amd/initrd.gz | \
sudo cpio --extract --make-directories --no-absolute-filenames
sudo cp ../preseed.final preseed.cfg
sudo chown root:root preseed.cfg
sudo chmod o+w ../$ISODIR_WRITE/install.amd/initrd.gz
find . | cpio -H newc --create | \
        gzip -9 > ../$ISODIR_WRITE/install.amd/initrd.gz
sudo chmod o-w ../$ISODIR_WRITE/install.amd/initrd.gz
cd ../
sudo rm -fr irmod/

echo 'fixing MD5 checksums...'
pushd $ISODIR_WRITE
  md5sum $(find -type f) > md5sum.txt
popd

echo 'making ISO...'
# genisoimage -o $ISOFILE_FINAL \
#   -r -J -no-emul-boot -boot-load-size 4 \
#   -boot-info-table \
#   -b isolinux/isolinux.bin \
#   -c isolinux/boot.cat ./$ISODIR_WRITE

echo 'making hybrid ISO...'
xorriso -as mkisofs \
  -r -J -V "jessie" \
  -b isolinux/isolinux.bin \
  -c isolinux/boot.cat \
  -no-emul-boot \
  -partition_offset 16 \
  -boot-load-size 4 \
  -boot-info-table \
  -isohybrid-mbr "/usr/lib/syslinux/bios/isohdpfx.bin" \
  -o $ISOFILE_FINAL \
  ./$ISODIR_WRITE

# and if that doesn't work:
# http://askubuntu.com/questions/6684/preseeding-ubuntu-server

## preseed.final
#### Contents of the preconfiguration file (for jessie)
### Localization
# Preseeding only locale sets language, country and locale.
d-i debian-installer/locale string en_IE

# The values can also be preseeded individually for greater flexibility.
#d-i debian-installer/language string en
#d-i debian-installer/country string NL
#d-i debian-installer/locale string en_GB.UTF-8
# Optionally specify additional locales to be generated.
#d-i localechooser/supported-locales multiselect en_US.UTF-8, nl_NL.UTF-8

# Keyboard selection.
d-i keyboard-configuration/xkb-keymap select us
# d-i keyboard-configuration/toggle select No toggling

### Network configuration
# Disable network configuration entirely. This is useful for cdrom
# installations on non-networked devices where the network questions,
# warning and long timeouts are a nuisance.
d-i netcfg/enable boolean false

# netcfg will choose an interface that has link if possible. This makes it
# skip displaying a list if there is more than one interface.
d-i netcfg/choose_interface select auto

# To pick a particular interface instead:
#d-i netcfg/choose_interface select eth1

# To set a different link detection timeout (default is 3 seconds).
# Values are interpreted as seconds.
#d-i netcfg/link_wait_timeout string 10

# If you have a slow dhcp server and the installer times out waiting for
# it, this might be useful.
#d-i netcfg/dhcp_timeout string 60
#d-i netcfg/dhcpv6_timeout string 60

# If you prefer to configure the network manually, uncomment this line and
# the static network configuration below.
#d-i netcfg/disable_autoconfig boolean true

# If you want the preconfiguration file to work on systems both with and
# without a dhcp server, uncomment these lines and the static network
# configuration below.
#d-i netcfg/dhcp_failed note
#d-i netcfg/dhcp_options select Configure network manually

# Static network configuration.
#
# IPv4 example
#d-i netcfg/get_ipaddress string 192.168.1.42
#d-i netcfg/get_netmask string 255.255.255.0
#d-i netcfg/get_gateway string 192.168.1.1
#d-i netcfg/get_nameservers string 192.168.1.1
#d-i netcfg/confirm_static boolean true
#
# IPv6 example
#d-i netcfg/get_ipaddress string fc00::2
#d-i netcfg/get_netmask string ffff:ffff:ffff:ffff::
#d-i netcfg/get_gateway string fc00::1
#d-i netcfg/get_nameservers string fc00::1
#d-i netcfg/confirm_static boolean true

# Any hostname and domain names assigned from dhcp take precedence over
# values set here. However, setting the values still prevents the questions
# from being shown, even if values come from dhcp.
d-i netcfg/get_hostname string unassigned-hostname
d-i netcfg/get_domain string unassigned-domain

# If you want to force a hostname, regardless of what either the DHCP
# server returns or what the reverse DNS entry for the IP is, uncomment
# and adjust the following line.
#d-i netcfg/hostname string somehost

# Disable that annoying WEP key dialog.
d-i netcfg/wireless_wep string
# The wacky dhcp hostname that some ISPs use as a password of sorts.
#d-i netcfg/dhcp_hostname string radish

# If non-free firmware is needed for the network or other hardware, you can
# configure the installer to always try to load it, without prompting. Or
# change to false to disable asking.
d-i hw-detect/load_firmware boolean true

### Network console
# Use the following settings if you wish to make use of the network-console
# component for remote installation over SSH. This only makes sense if you
# intend to perform the remainder of the installation manually.
#d-i anna/choose_modules string network-console
#d-i network-console/authorized_keys_url string http://10.0.0.1/openssh-key
#d-i network-console/password password r00tme
#d-i network-console/password-again password r00tme

### Mirror settings
# If you select ftp, the mirror/country string does not need to be set.
#d-i mirror/protocol string ftp
d-i mirror/country string manual
d-i mirror/http/hostname string httpredir.debian.org
d-i mirror/http/directory string /debian
d-i mirror/http/proxy string

# Suite to install.
#d-i mirror/suite string testing
# Suite to use for loading installer components (optional).
#d-i mirror/udeb/suite string testing

### Account setup
# Skip creation of a root account (normal user account will be able to
# use sudo).
d-i passwd/root-login boolean false
# Alternatively, to skip creation of a normal user account.
#d-i passwd/make-user boolean false

# Root password, either in clear text
#d-i passwd/root-password password r00tme
#d-i passwd/root-password-again password r00tme
# or encrypted using an MD5 hash.
#d-i passwd/root-password-crypted password [MD5 hash]

# To create a normal user account.
d-i passwd/user-fullname string srvadm-a
d-i passwd/username string srvadm-a
# Normal user's password, either in clear text
d-i passwd/user-password password changeme
d-i passwd/user-password-again password changeme
# or encrypted using an MD5 hash.
#d-i passwd/user-password-crypted password [MD5 hash]
# Create the first user with the specified UID instead of the default.
#d-i passwd/user-uid string 1010

# The user account will be added to some standard initial groups. To
# override that, use this.
#d-i passwd/user-default-groups string audio cdrom video

### Clock and time zone setup
# Controls whether or not the hardware clock is set to UTC.
d-i clock-setup/utc boolean true

# You may set this to any valid setting for $TZ; see the contents of
# /usr/share/zoneinfo/ for valid values.
d-i time/zone string EU/Moscow

# Controls whether to use NTP to set the clock during the install
d-i clock-setup/ntp boolean true
# NTP server to use. The default is almost always fine here.
#d-i clock-setup/ntp-server string ntp.example.com

### Partitioning
## Partitioning example
# If the system has free space you can choose to only partition that space.
# This is only honoured if partman-auto/method (below) is not set.
d-i partman-auto/init_automatically_partition select biggest_free

# Alternatively, you may specify a disk to partition. If the system has only
# one disk the installer will default to using that, but otherwise the device
# name must be given in traditional, non-devfs format (so e.g. /dev/sda
# and not e.g. /dev/discs/disc0/disc).
# For example, to use the first SCSI/SATA hard disk:
#d-i partman-auto/disk string /dev/sda
# In addition, you'll need to specify the method to use.
# The presently available methods are:
# - regular: use the usual partition types for your architecture
# - lvm:     use LVM to partition the disk
# - crypto:  use LVM within an encrypted partition
d-i partman-auto/method string regular

# If one of the disks that are going to be automatically partitioned
# contains an old LVM configuration, the user will normally receive a
# warning. This can be preseeded away...
d-i partman-lvm/device_remove_lvm boolean true
# The same applies to pre-existing software RAID array:
d-i partman-md/device_remove_md boolean true
# And the same goes for the confirmation to write the lvm partitions.
d-i partman-lvm/confirm boolean true
d-i partman-lvm/confirm_nooverwrite boolean true

# You can choose one of the three predefined partitioning recipes:
# - atomic: all files in one partition
# - home:   separate /home partition
# - multi:  separate /home, /var, and /tmp partitions
d-i partman-auto/choose_recipe select atomic

# Or provide a recipe of your own...
# If you have a way to get a recipe file into the d-i environment, you can
# just point at it.
#d-i partman-auto/expert_recipe_file string /hd-media/recipe

# If not, you can put an entire recipe into the preconfiguration file in one
# (logical) line. This example creates a small /boot partition, suitable
# swap, and uses the rest of the space for the root partition:
#d-i partman-auto/expert_recipe string                         \
#      boot-root ::                                            \
#              40 50 100 ext3                                  \
#                      $primary{ } $bootable{ }                \
#                      method{ format } format{ }              \
#                      use_filesystem{ } filesystem{ ext3 }    \
#                      mountpoint{ /boot }                     \
#              .                                               \
#              500 10000 1000000000 ext3                       \
#                      method{ format } format{ }              \
#                      use_filesystem{ } filesystem{ ext3 }    \
#                      mountpoint{ / }                         \
#              .                                               \
#              64 512 300% linux-swap                          \
#                      method{ swap } format{ }                \
#              .

# The full recipe format is documented in the file partman-auto-recipe.txt
# included in the 'debian-installer' package or available from D-I source
# repository. This also documents how to specify settings such as file
# system labels, volume group names and which physical devices to include
# in a volume group.

# This makes partman automatically partition without confirmation, provided
# that you told it what to do using one of the methods above.
d-i partman-partitioning/confirm_write_new_label boolean true
d-i partman/choose_partition select finish
d-i partman/confirm boolean true
d-i partman/confirm_nooverwrite boolean true

## Partitioning using RAID
# The method should be set to "raid".
#d-i partman-auto/method string raid
# Specify the disks to be partitioned. They will all get the same layout,
# so this will only work if the disks are the same size.
#d-i partman-auto/disk string /dev/sda /dev/sdb

# Next you need to specify the physical partitions that will be used.
#d-i partman-auto/expert_recipe string \
#      multiraid ::                                         \
#              1000 5000 4000 raid                          \
#                      $primary{ } method{ raid }           \
#              .                                            \
#              64 512 300% raid                             \
#                      method{ raid }                       \
#              .                                            \
#              500 10000 1000000000 raid                    \
#                      method{ raid }                       \
#              .

# Last you need to specify how the previously defined partitions will be
# used in the RAID setup. Remember to use the correct partition numbers
# for logical partitions. RAID levels 0, 1, 5, 6 and 10 are supported;
# devices are separated using "#".
# Parameters are:
# <raidtype> <devcount> <sparecount> <fstype> <mountpoint> \
#          <devices> <sparedevices>

#d-i partman-auto-raid/recipe string \
#    1 2 0 ext3 /                    \
#          /dev/sda1#/dev/sdb1       \
#    .                               \
#    1 2 0 swap -                    \
#          /dev/sda5#/dev/sdb5       \
#    .                               \
#    0 2 0 ext3 /home                \
#          /dev/sda6#/dev/sdb6       \
#    .

# For additional information see the file partman-auto-raid-recipe.txt
# included in the 'debian-installer' package or available from D-I source
# repository.

# This makes partman automatically partition without confirmation.
d-i partman-md/confirm boolean true
d-i partman-partitioning/confirm_write_new_label boolean true
d-i partman/choose_partition select finish
d-i partman/confirm boolean true
d-i partman/confirm_nooverwrite boolean true

## Controlling how partitions are mounted
# The default is to mount by UUID, but you can also choose "traditional" to
# use traditional device names, or "label" to try filesystem labels before
# falling back to UUIDs.
#d-i partman/mount_style select uuid

### Base system installation
# Configure APT to not install recommended packages by default. Use of this
# option can result in an incomplete system and should only be used by very
# experienced users.
#d-i base-installer/install-recommends boolean false

# The kernel image (meta) package to be installed; "none" can be used if no
# kernel is to be installed.
#d-i base-installer/kernel/image string linux-image-586

### Apt setup
# You can choose to install non-free and contrib software.
d-i apt-setup/non-free boolean true
d-i apt-setup/contrib boolean true
# Uncomment this if you don't want to use a network mirror.
d-i apt-setup/use_mirror boolean false
# Select which update services to use; define the mirrors to be used.
# Values shown below are the normal defaults.
d-i apt-setup/services-select multiselect security, updates
d-i apt-setup/security_host string security.debian.org

# Additional repositories, local[0-9] available
#d-i apt-setup/local0/repository string \
#       http://local.server/debian stable main
#d-i apt-setup/local0/comment string local server
# Enable deb-src lines
#d-i apt-setup/local0/source boolean true
# URL to the public key of the local repository; you must provide a key or
# apt will complain about the unauthenticated repository and so the
# sources.list line will be left commented out
#d-i apt-setup/local0/key string http://local.server/key

# By default the installer requires that repositories be authenticated
# using a known gpg key. This setting can be used to disable that
# authentication. Warning: Insecure, not recommended.
#d-i debian-installer/allow_unauthenticated boolean true

# Uncomment this to add multiarch configuration for i386
#d-i apt-setup/multiarch string i386


### Package selection
tasksel tasksel/first multiselect standard, ssh-server

# Individual additional packages to install
#d-i pkgsel/include string openssh-server
# Whether to upgrade packages after debootstrap.
# Allowed values: none, safe-upgrade, full-upgrade
#d-i pkgsel/upgrade select none

# Some versions of the installer can report back on what software you have
# installed, and what software you use. The default is not to report back,
# but sending reports helps the project determine what software is most
# popular and include it on CDs.
popularity-contest popularity-contest/participate boolean false

### Boot loader installation
# Grub is the default boot loader (for x86). If you want lilo installed
# instead, uncomment this:
#d-i grub-installer/skip boolean true
# To also skip installing lilo, and install no bootloader, uncomment this
# too:
#d-i lilo-installer/skip boolean true


# This is fairly safe to set, it makes grub install automatically to the MBR
# if no other operating system is detected on the machine.
d-i grub-installer/only_debian boolean true

# This one makes grub-installer install to the MBR if it also finds some other
# OS, which is less safe as it might not be able to boot that other OS.
d-i grub-installer/with_other_os boolean true

# Due notably to potential USB sticks, the location of the MBR can not be
# determined safely in general, so this needs to be specified:
#d-i grub-installer/bootdev  string /dev/sda
# To install to the first device (assuming it is not a USB stick):
d-i grub-installer/bootdev  string default

# Alternatively, if you want to install to a location other than the mbr,
# uncomment and edit these lines:
#d-i grub-installer/only_debian boolean false
#d-i grub-installer/with_other_os boolean false
#d-i grub-installer/bootdev  string (hd0,1)
# To install grub to multiple disks:
#d-i grub-installer/bootdev  string (hd0,1) (hd1,1) (hd2,1)

# Optional password for grub, either in clear text
#d-i grub-installer/password password r00tme
#d-i grub-installer/password-again password r00tme
# or encrypted using an MD5 hash, see grub-md5-crypt(8).
#d-i grub-installer/password-crypted password [MD5 hash]

# Use the following option to add additional boot parameters for the
# installed system (if supported by the bootloader installer).
# Note: options passed to the installer will be added automatically.
#d-i debian-installer/add-kernel-opts string nousb

### Finishing up the installation
# During installations from serial console, the regular virtual consoles
# (VT1-VT6) are normally disabled in /etc/inittab. Uncomment the next
# line to prevent this.
#d-i finish-install/keep-consoles boolean true

# Avoid that last message about the install being complete.
d-i finish-install/reboot_in_progress note

# This will prevent the installer from ejecting the CD during the reboot,
# which is useful in some situations.
#d-i cdrom-detect/eject boolean false

# This is how to make the installer shutdown when finished, but not
# reboot into the installed system.
#d-i debian-installer/exit/halt boolean true
# This will power off the machine instead of just halting it.
#d-i debian-installer/exit/poweroff boolean true

### Preseeding other packages
# Depending on what software you choose to install, or if things go wrong
# during the installation process, it's possible that other questions may
# be asked. You can preseed those too, of course. To get a list of every
# possible question that could be asked during an install, do an
# installation, and then run these commands:
#   debconf-get-selections --installer > file
#   debconf-get-selections >> file


#### Advanced options
### Running custom commands during the installation
# d-i preseeding is inherently not secure. Nothing in the installer checks
# for attempts at buffer overflows or other exploits of the values of a
# preconfiguration file like this one. Only use preconfiguration files from
# trusted locations! To drive that home, and because it's generally useful,
# here's a way to run any shell command you'd like inside the installer,
# automatically.

# This first command is run as early as possible, just after
# preseeding is read.
#d-i preseed/early_command string anna-install some-udeb
# This command is run immediately before the partitioner starts. It may be
# useful to apply dynamic partitioner preseeding that depends on the state
# of the disks (which may not be visible when preseed/early_command runs).
#d-i partman/early_command \
#       string debconf-set partman-auto/disk "$(list-devices disk | head -n1)"
# This command is run just before the install finishes, but when there is
# still a usable /target directory. You can chroot to /target and use it
# directly, or use the apt-install and in-target commands to easily install
# packages and run commands in the target system.
#d-i preseed/late_command string apt-install zsh; in-target chsh -s /bin/zsh
	set -e

	set -u

	# hat-tips:
	# - http://codeghar.wordpress.com/2011/12/14/automated-customized-debian-installation-using-preseed/
	# - the gist

	# required packages (apt-get install)
	# xorriso
	# syslinux

	ISOFILE=debian-netinst.iso
	ISOFILE_FINAL=debian-netinst-mod.iso
	ISODIR=debian-iso
	ISODIR_WRITE=$ISODIR-rw

	# download ISO:
	# wget -nc -O $ISOFILE http://cdimage.debian.org/cdimage/wheezy_di_rc3/amd64/iso-cd/debian-wheezy-DI-rc3-amd64-netinst.iso \|\| true
	wget -nc -O $ISOFILE https://cdimage.debian.org/cdimage/unofficial/non-free/cd-including-firmware/current/amd64/iso-cd/firmware-8.7.1-amd64-netinst.iso \|\| true

	echo 'mounting ISO9660 filesystem...'
	# source: http://wiki.debian.org/DebianInstaller/ed/EditIso
	[ -d $ISODIR ] \|\| mkdir -p $ISODIR
	sudo mount -o loop $ISOFILE $ISODIR

	echo 'coping to writable dir...'
	rm -rf $ISODIR_WRITE \|\| true
	[ -d $ISODIR_WRITE ] \|\| mkdir -p $ISODIR_WRITE
	rsync -a -H --exclude=TRANS.TBL $ISODIR/ $ISODIR_WRITE

	echo 'unmount iso dir'
	sudo umount $ISODIR

	echo 'correcting permissions...'
	chmod 755 -R $ISODIR_WRITE

	echo 'copying preseed file...'
	cp preseed.final $ISODIR_WRITE/preseed.cfg

	echo 'edit isolinux/txt.cfg...'
	sed 's/initrd.gz/initrd.gz file=\/cdrom\/preseed.cfg/' -i $ISODIR_WRITE/isolinux/txt.cfg

	sudo mkdir irmod
	cd irmod
	sudo gzip -d < ../$ISODIR_WRITE/install.amd/initrd.gz \| \
	sudo cpio --extract --make-directories --no-absolute-filenames
	sudo cp ../preseed.final preseed.cfg
	sudo chown root:root preseed.cfg
	sudo chmod o+w ../$ISODIR_WRITE/install.amd/initrd.gz
	find . \| cpio -H newc --create \| \
	gzip -9 > ../$ISODIR_WRITE/install.amd/initrd.gz
	sudo chmod o-w ../$ISODIR_WRITE/install.amd/initrd.gz
	cd ../
	sudo rm -fr irmod/

	echo 'fixing MD5 checksums...'
	pushd $ISODIR_WRITE
	md5sum $(find -type f) > md5sum.txt
	popd

	echo 'making ISO...'
	# genisoimage -o $ISOFILE_FINAL \
	# -r -J -no-emul-boot -boot-load-size 4 \
	# -boot-info-table \
	# -b isolinux/isolinux.bin \
	# -c isolinux/boot.cat ./$ISODIR_WRITE

	echo 'making hybrid ISO...'
	xorriso -as mkisofs \
	-r -J -V "jessie" \
	-b isolinux/isolinux.bin \
	-c isolinux/boot.cat \
	-no-emul-boot \
	-partition_offset 16 \
	-boot-load-size 4 \
	-boot-info-table \
	-isohybrid-mbr "/usr/lib/syslinux/bios/isohdpfx.bin" \
	-o $ISOFILE_FINAL \
	./$ISODIR_WRITE

	# and if that doesn't work:
	# http://askubuntu.com/questions/6684/preseeding-ubuntu-server
	#### Contents of the preconfiguration file (for jessie)
	### Localization
	# Preseeding only locale sets language, country and locale.
	d-i debian-installer/locale string en_IE

	# The values can also be preseeded individually for greater flexibility.
	#d-i debian-installer/language string en
	#d-i debian-installer/country string NL
	#d-i debian-installer/locale string en_GB.UTF-8
	# Optionally specify additional locales to be generated.
	#d-i localechooser/supported-locales multiselect en_US.UTF-8, nl_NL.UTF-8

	# Keyboard selection.
	d-i keyboard-configuration/xkb-keymap select us
	# d-i keyboard-configuration/toggle select No toggling

	### Network configuration
	# Disable network configuration entirely. This is useful for cdrom
	# installations on non-networked devices where the network questions,
	# warning and long timeouts are a nuisance.
	d-i netcfg/enable boolean false

	# netcfg will choose an interface that has link if possible. This makes it
	# skip displaying a list if there is more than one interface.
	d-i netcfg/choose_interface select auto

	# To pick a particular interface instead:
	#d-i netcfg/choose_interface select eth1

	# To set a different link detection timeout (default is 3 seconds).
	# Values are interpreted as seconds.
	#d-i netcfg/link_wait_timeout string 10

	# If you have a slow dhcp server and the installer times out waiting for
	# it, this might be useful.
	#d-i netcfg/dhcp_timeout string 60
	#d-i netcfg/dhcpv6_timeout string 60

	# If you prefer to configure the network manually, uncomment this line and
	# the static network configuration below.
	#d-i netcfg/disable_autoconfig boolean true

	# If you want the preconfiguration file to work on systems both with and
	# without a dhcp server, uncomment these lines and the static network
	# configuration below.
	#d-i netcfg/dhcp_failed note
	#d-i netcfg/dhcp_options select Configure network manually

	# Static network configuration.
	#
	# IPv4 example
	#d-i netcfg/get_ipaddress string 192.168.1.42
	#d-i netcfg/get_netmask string 255.255.255.0
	#d-i netcfg/get_gateway string 192.168.1.1
	#d-i netcfg/get_nameservers string 192.168.1.1
	#d-i netcfg/confirm_static boolean true
	#
	# IPv6 example
	#d-i netcfg/get_ipaddress string fc00::2
	#d-i netcfg/get_netmask string ffff:ffff:ffff:ffff::
	#d-i netcfg/get_gateway string fc00::1
	#d-i netcfg/get_nameservers string fc00::1
	#d-i netcfg/confirm_static boolean true

	# Any hostname and domain names assigned from dhcp take precedence over
	# values set here. However, setting the values still prevents the questions
	# from being shown, even if values come from dhcp.
	d-i netcfg/get_hostname string unassigned-hostname
	d-i netcfg/get_domain string unassigned-domain

	# If you want to force a hostname, regardless of what either the DHCP
	# server returns or what the reverse DNS entry for the IP is, uncomment
	# and adjust the following line.
	#d-i netcfg/hostname string somehost

	# Disable that annoying WEP key dialog.
	d-i netcfg/wireless_wep string
	# The wacky dhcp hostname that some ISPs use as a password of sorts.
	#d-i netcfg/dhcp_hostname string radish

	# If non-free firmware is needed for the network or other hardware, you can
	# configure the installer to always try to load it, without prompting. Or
	# change to false to disable asking.
	d-i hw-detect/load_firmware boolean true

	### Network console
	# Use the following settings if you wish to make use of the network-console
	# component for remote installation over SSH. This only makes sense if you
	# intend to perform the remainder of the installation manually.
	#d-i anna/choose_modules string network-console
	#d-i network-console/authorized_keys_url string http://10.0.0.1/openssh-key
	#d-i network-console/password password r00tme
	#d-i network-console/password-again password r00tme

	### Mirror settings
	# If you select ftp, the mirror/country string does not need to be set.
	#d-i mirror/protocol string ftp
	d-i mirror/country string manual
	d-i mirror/http/hostname string httpredir.debian.org
	d-i mirror/http/directory string /debian
	d-i mirror/http/proxy string

	# Suite to install.
	#d-i mirror/suite string testing
	# Suite to use for loading installer components (optional).
	#d-i mirror/udeb/suite string testing

	### Account setup
	# Skip creation of a root account (normal user account will be able to
	# use sudo).
	d-i passwd/root-login boolean false
	# Alternatively, to skip creation of a normal user account.
	#d-i passwd/make-user boolean false

	# Root password, either in clear text
	#d-i passwd/root-password password r00tme
	#d-i passwd/root-password-again password r00tme
	# or encrypted using an MD5 hash.
	#d-i passwd/root-password-crypted password [MD5 hash]

	# To create a normal user account.
	d-i passwd/user-fullname string srvadm-a
	d-i passwd/username string srvadm-a
	# Normal user's password, either in clear text
	d-i passwd/user-password password changeme
	d-i passwd/user-password-again password changeme
	# or encrypted using an MD5 hash.
	#d-i passwd/user-password-crypted password [MD5 hash]
	# Create the first user with the specified UID instead of the default.
	#d-i passwd/user-uid string 1010

	# The user account will be added to some standard initial groups. To
	# override that, use this.
	#d-i passwd/user-default-groups string audio cdrom video

	### Clock and time zone setup
	# Controls whether or not the hardware clock is set to UTC.
	d-i clock-setup/utc boolean true

	# You may set this to any valid setting for $TZ; see the contents of
	# /usr/share/zoneinfo/ for valid values.
	d-i time/zone string EU/Moscow

	# Controls whether to use NTP to set the clock during the install
	d-i clock-setup/ntp boolean true
	# NTP server to use. The default is almost always fine here.
	#d-i clock-setup/ntp-server string ntp.example.com

	### Partitioning
	## Partitioning example
	# If the system has free space you can choose to only partition that space.
	# This is only honoured if partman-auto/method (below) is not set.
	d-i partman-auto/init_automatically_partition select biggest_free

	# Alternatively, you may specify a disk to partition. If the system has only
	# one disk the installer will default to using that, but otherwise the device
	# name must be given in traditional, non-devfs format (so e.g. /dev/sda
	# and not e.g. /dev/discs/disc0/disc).
	# For example, to use the first SCSI/SATA hard disk:
	#d-i partman-auto/disk string /dev/sda
	# In addition, you'll need to specify the method to use.
	# The presently available methods are:
	# - regular: use the usual partition types for your architecture
	# - lvm: use LVM to partition the disk
	# - crypto: use LVM within an encrypted partition
	d-i partman-auto/method string regular

	# If one of the disks that are going to be automatically partitioned
	# contains an old LVM configuration, the user will normally receive a
	# warning. This can be preseeded away...
	d-i partman-lvm/device_remove_lvm boolean true
	# The same applies to pre-existing software RAID array:
	d-i partman-md/device_remove_md boolean true
	# And the same goes for the confirmation to write the lvm partitions.
	d-i partman-lvm/confirm boolean true
	d-i partman-lvm/confirm_nooverwrite boolean true

	# You can choose one of the three predefined partitioning recipes:
	# - atomic: all files in one partition
	# - home: separate /home partition
	# - multi: separate /home, /var, and /tmp partitions
	d-i partman-auto/choose_recipe select atomic

	# Or provide a recipe of your own...
	# If you have a way to get a recipe file into the d-i environment, you can
	# just point at it.
	#d-i partman-auto/expert_recipe_file string /hd-media/recipe

	# If not, you can put an entire recipe into the preconfiguration file in one
	# (logical) line. This example creates a small /boot partition, suitable
	# swap, and uses the rest of the space for the root partition:
	#d-i partman-auto/expert_recipe string \
	# boot-root :: \
	# 40 50 100 ext3 \
	# $primary{ } $bootable{ } \
	# method{ format } format{ } \
	# use_filesystem{ } filesystem{ ext3 } \
	# mountpoint{ /boot } \
	# . \
	# 500 10000 1000000000 ext3 \
	# method{ format } format{ } \
	# use_filesystem{ } filesystem{ ext3 } \
	# mountpoint{ / } \
	# . \
	# 64 512 300% linux-swap \
	# method{ swap } format{ } \
	# .

	# The full recipe format is documented in the file partman-auto-recipe.txt
	# included in the 'debian-installer' package or available from D-I source
	# repository. This also documents how to specify settings such as file
	# system labels, volume group names and which physical devices to include
	# in a volume group.

	# This makes partman automatically partition without confirmation, provided
	# that you told it what to do using one of the methods above.
	d-i partman-partitioning/confirm_write_new_label boolean true
	d-i partman/choose_partition select finish
	d-i partman/confirm boolean true
	d-i partman/confirm_nooverwrite boolean true

	## Partitioning using RAID
	# The method should be set to "raid".
	#d-i partman-auto/method string raid
	# Specify the disks to be partitioned. They will all get the same layout,
	# so this will only work if the disks are the same size.
	#d-i partman-auto/disk string /dev/sda /dev/sdb

	# Next you need to specify the physical partitions that will be used.
	#d-i partman-auto/expert_recipe string \
	# multiraid :: \
	# 1000 5000 4000 raid \
	# $primary{ } method{ raid } \
	# . \
	# 64 512 300% raid \
	# method{ raid } \
	# . \
	# 500 10000 1000000000 raid \
	# method{ raid } \
	# .

	# Last you need to specify how the previously defined partitions will be
	# used in the RAID setup. Remember to use the correct partition numbers
	# for logical partitions. RAID levels 0, 1, 5, 6 and 10 are supported;
	# devices are separated using "#".
	# Parameters are:
	# <raidtype> <devcount> <sparecount> <fstype> <mountpoint> \
	# <devices> <sparedevices>

	#d-i partman-auto-raid/recipe string \
	# 1 2 0 ext3 / \
	# /dev/sda1#/dev/sdb1 \
	# . \
	# 1 2 0 swap - \
	# /dev/sda5#/dev/sdb5 \
	# . \
	# 0 2 0 ext3 /home \
	# /dev/sda6#/dev/sdb6 \
	# .

	# For additional information see the file partman-auto-raid-recipe.txt
	# included in the 'debian-installer' package or available from D-I source
	# repository.

	# This makes partman automatically partition without confirmation.
	d-i partman-md/confirm boolean true
	d-i partman-partitioning/confirm_write_new_label boolean true
	d-i partman/choose_partition select finish
	d-i partman/confirm boolean true
	d-i partman/confirm_nooverwrite boolean true

	## Controlling how partitions are mounted
	# The default is to mount by UUID, but you can also choose "traditional" to
	# use traditional device names, or "label" to try filesystem labels before
	# falling back to UUIDs.
	#d-i partman/mount_style select uuid

	### Base system installation
	# Configure APT to not install recommended packages by default. Use of this
	# option can result in an incomplete system and should only be used by very
	# experienced users.
	#d-i base-installer/install-recommends boolean false

	# The kernel image (meta) package to be installed; "none" can be used if no
	# kernel is to be installed.
	#d-i base-installer/kernel/image string linux-image-586

	### Apt setup
	# You can choose to install non-free and contrib software.
	d-i apt-setup/non-free boolean true
	d-i apt-setup/contrib boolean true
	# Uncomment this if you don't want to use a network mirror.
	d-i apt-setup/use_mirror boolean false
	# Select which update services to use; define the mirrors to be used.
	# Values shown below are the normal defaults.
	d-i apt-setup/services-select multiselect security, updates
	d-i apt-setup/security_host string security.debian.org

	# Additional repositories, local[0-9] available
	#d-i apt-setup/local0/repository string \
	# http://local.server/debian stable main
	#d-i apt-setup/local0/comment string local server
	# Enable deb-src lines
	#d-i apt-setup/local0/source boolean true
	# URL to the public key of the local repository; you must provide a key or
	# apt will complain about the unauthenticated repository and so the
	# sources.list line will be left commented out
	#d-i apt-setup/local0/key string http://local.server/key

	# By default the installer requires that repositories be authenticated
	# using a known gpg key. This setting can be used to disable that
	# authentication. Warning: Insecure, not recommended.
	#d-i debian-installer/allow_unauthenticated boolean true

	# Uncomment this to add multiarch configuration for i386
	#d-i apt-setup/multiarch string i386


	### Package selection
	tasksel tasksel/first multiselect standard, ssh-server

	# Individual additional packages to install
	#d-i pkgsel/include string openssh-server
	# Whether to upgrade packages after debootstrap.
	# Allowed values: none, safe-upgrade, full-upgrade
	#d-i pkgsel/upgrade select none

	# Some versions of the installer can report back on what software you have
	# installed, and what software you use. The default is not to report back,
	# but sending reports helps the project determine what software is most
	# popular and include it on CDs.
	popularity-contest popularity-contest/participate boolean false

	### Boot loader installation
	# Grub is the default boot loader (for x86). If you want lilo installed
	# instead, uncomment this:
	#d-i grub-installer/skip boolean true
	# To also skip installing lilo, and install no bootloader, uncomment this
	# too:
	#d-i lilo-installer/skip boolean true


	# This is fairly safe to set, it makes grub install automatically to the MBR
	# if no other operating system is detected on the machine.
	d-i grub-installer/only_debian boolean true

	# This one makes grub-installer install to the MBR if it also finds some other
	# OS, which is less safe as it might not be able to boot that other OS.
	d-i grub-installer/with_other_os boolean true

	# Due notably to potential USB sticks, the location of the MBR can not be
	# determined safely in general, so this needs to be specified:
	#d-i grub-installer/bootdev string /dev/sda
	# To install to the first device (assuming it is not a USB stick):
	d-i grub-installer/bootdev string default

	# Alternatively, if you want to install to a location other than the mbr,
	# uncomment and edit these lines:
	#d-i grub-installer/only_debian boolean false
	#d-i grub-installer/with_other_os boolean false
	#d-i grub-installer/bootdev string (hd0,1)
	# To install grub to multiple disks:
	#d-i grub-installer/bootdev string (hd0,1) (hd1,1) (hd2,1)

	# Optional password for grub, either in clear text
	#d-i grub-installer/password password r00tme
	#d-i grub-installer/password-again password r00tme
	# or encrypted using an MD5 hash, see grub-md5-crypt(8).
	#d-i grub-installer/password-crypted password [MD5 hash]

	# Use the following option to add additional boot parameters for the
	# installed system (if supported by the bootloader installer).
	# Note: options passed to the installer will be added automatically.
	#d-i debian-installer/add-kernel-opts string nousb

	### Finishing up the installation
	# During installations from serial console, the regular virtual consoles
	# (VT1-VT6) are normally disabled in /etc/inittab. Uncomment the next
	# line to prevent this.
	#d-i finish-install/keep-consoles boolean true

	# Avoid that last message about the install being complete.
	d-i finish-install/reboot_in_progress note

	# This will prevent the installer from ejecting the CD during the reboot,
	# which is useful in some situations.
	#d-i cdrom-detect/eject boolean false

	# This is how to make the installer shutdown when finished, but not
	# reboot into the installed system.
	#d-i debian-installer/exit/halt boolean true
	# This will power off the machine instead of just halting it.
	#d-i debian-installer/exit/poweroff boolean true

	### Preseeding other packages
	# Depending on what software you choose to install, or if things go wrong
	# during the installation process, it's possible that other questions may
	# be asked. You can preseed those too, of course. To get a list of every
	# possible question that could be asked during an install, do an
	# installation, and then run these commands:
	# debconf-get-selections --installer > file
	# debconf-get-selections >> file


	#### Advanced options
	### Running custom commands during the installation
	# d-i preseeding is inherently not secure. Nothing in the installer checks
	# for attempts at buffer overflows or other exploits of the values of a
	# preconfiguration file like this one. Only use preconfiguration files from
	# trusted locations! To drive that home, and because it's generally useful,
	# here's a way to run any shell command you'd like inside the installer,
	# automatically.

	# This first command is run as early as possible, just after
	# preseeding is read.
	#d-i preseed/early_command string anna-install some-udeb
	# This command is run immediately before the partitioner starts. It may be
	# useful to apply dynamic partitioner preseeding that depends on the state
	# of the disks (which may not be visible when preseed/early_command runs).
	#d-i partman/early_command \
	# string debconf-set partman-auto/disk "$(list-devices disk \| head -n1)"
	# This command is run just before the install finishes, but when there is
	# still a usable /target directory. You can chroot to /target and use it
	# directly, or use the apt-install and in-target commands to easily install
	# packages and run commands in the target system.
	#d-i preseed/late_command string apt-install zsh; in-target chsh -s /bin/zsh