WillianTomaz

Saturday, April 22, 2023

How to Use 1Password SSH Agent with WSL2 (on Windows 11)

• Note:

  • Always look for the official documentation, this tutorial may not suit you as there are new updates to the installation process.
  • References are at the end of the document.

• Was used:

  • Windows 11 (x64)
  • WSL 2 (Ubuntu 22.04.2 LTS)

1oh1

Enable PCIe 3.0 speeds for NVMe SSDs on Dell OptiPlex 3060

Out of the box, any M.2 NVMe SSDs connected to the Dell OptiPlex 3060 runs at PCIe Gen 2.0 speeds (Max 5 GT/s; 2 GB/s) so the speed tests look like this:

However, after this BIOS mod, the SSD can reach PCIe Gen 3.0 speeds (Max 8 GT/s; 3.9 GB/s) so the speed tests look like this:

AliKhadivi

Install and config cgroup with cgroupfs in Ubuntu

Install

Install required packages

apt update && apt install cgroup-tools cgroup-lite libcgroup1  cgroupfs-mount

Configure

copy cgred.conf from examples

h0bbel

# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
# newer versions of the distribution.
deb http://us.archive.ubuntu.com/ubuntu/ bionic main restricted
# deb-src http://us.archive.ubuntu.com/ubuntu/ bionic main restricted

## Major bug fix updates produced after the final release of the
## distribution.
deb http://us.archive.ubuntu.com/ubuntu/ bionic-updates main restricted
# deb-src http://us.archive.ubuntu.com/ubuntu/ bionic-updates main restricted

cheethoe

# This will use osd.5 as an example
# ceph commands are expected to be run in the rook-toolbox
1) disk fails
2) remove disk from node
3) mark out osd. `ceph osd out osd.5`
4) remove from crush map. `ceph osd crush remove osd.5`
5) delete caps. `ceph auth del osd.5`
6) remove osd. `ceph osd rm osd.5`
7) delete the deployment `kubectl delete deployment -n rook-ceph rook-ceph-osd-id-5`
8) delete osd data dir on node `rm -rf /var/lib/rook/osd5`

chunter

To make Pageant automatically run and load keys at startup:

- Find the location of pageant.exe

- Windows key + R to open the 'run' dialog box

- Type: 'shell:startup' in the dialog box

- Create a shortcut to the pageant.exe and put into this startup folder.

walm

package main

import (
	"fmt"
	"log"
	"strconv"

	"github.com/miekg/dns"
)

kousik93

##Golang Type Switch - Arbitrary JSON Array Parsing I'm writing this mostly as a reference for myself. This could also be helpful to people who are new to GO.

####Note 1: Until Problem 3 we will assume we are dealing with a JSON for which we know the data types of key,value pairs. Only in Problem 3 we will look at how Type Switch is used to parse a 100% arbitary JSON

####Note 2: I know the following examples given here can be easily solved by declaring approprite structs and just decoding the PUT JSON into them, but, as im not able to come up with a better scenario, im going to stick with this to explain arbitrary JSON parsing.

artizirk

Working Huawei E3372h-153 SETPORT mappings


replacing A1,A2 with FF turns off need for usb_modeswitch 


AT^SETPORT="A1,A2;12,1,16,A1,A2"
^GETPORTMODE: TYPE: WCDMA: huawei,PCUI:0,MDM:1,NDIS:2,CDROM:3,SD:4,

AT^SETPORT="A1,A2;1,12,16,A1,A2"

dmangiarelli

How to setup Git for Windows

I know this document seems long, but it shouldn't be too difficult to follow. This guide is based on Windows, but every program here has Linux/Mac equivalents, and in most cases they're built-in. So, take a deep breath and go step by step.

The steps below are for GitHub, but the steps are almost idential for Bitbucket, Heroku, etc.

You'll probably want to make sure Chocolatey is installed, since it streamlines installing this stuff later. If you install via Chocolatey, you don't need to run the installers from the products' respective sites.

Cmder / ConEmu