hebasto

The bitcoin-core/guix.sigs Repository Workflow

Common environment variables

export SIGNER="hebasto"
export GUIX_SIGS_REPO="/home/hebasto/guix.sigs"
export DETACHED_SIGS_REPO="/home/hebasto/bitcoin-detached-sigs"

Gadgetoid

CFLAGS_ALL=-I../libusbgx/build/include -I../bcm2835-1.68/build/include -L../bcm2835-1.68/build/lib -I../lua-5.4.0/src -L../libusbgx/build/lib -L../libserialport/build/lib -L../lua-5.4.0/src -lpng -lz -lpthread -llua -lm -lbcm2835 -ldl

pi400: CFLAGS+=-static $(CFLAGS_ALL) -lusbgx -lconfig -DPI400_USB
pi400: pi400.c gadget-hid.c
	$(CC)  $^ $(CFLAGS) -o $@


pi400test: CFLAGS+=-static $(CFLAGS_ALL) -lusbgx -lconfig
pi400test: pi400.c gadget-hid.c
	$(CC)  $^ $(CFLAGS) -o $@

ariard

jonatack:
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maxtaco

Get a Bot Token

As your keybase user run:

$ keybase bot token create > /tmp/bot-token

You'll get back a base64 token, like: 6C37sjCBgMNf06Z6oTgixIxHJpja8G-Qp. This is your bot token that allows you to sign up bots.

jnewbery

Moved to https://bitcoincore.reviews

alexellis

# Published on Docker Hub with above user alexellisio.

# If you want to rebuild your own copy, follow below instructions
# Build this on each type of machine so you have the correct CPU extensions.
FROM alexellisio/boostbase

RUN git clone -b Linux https://github.com/nicehash/nheqminer.git
RUN cd nheqminer/cpu_xenoncat/Linux/asm/ && sh assemble.sh && cd ../../../Linux_cmake/nheqminer_cpu && cmake . && make

ENTRYPOINT ["./nheqminer/Linux_cmake/nheqminer_cpu/nheqminer_cpu"]

gbaman

Raspberry Pi Zero OTG Mode

Simple guide for setting up OTG modes on the Raspberry Pi Zero - By Andrew Mulholland (gbaman).

The Raspberry Pi Zero (and model A and A+) support USB On The Go, given the processor is connected directly to the USB port, unlike on the B, B+ or Pi 2 B, which goes via a USB hub.
Because of this, if setup to, the Pi can act as a USB slave instead, providing virtual serial (a terminal), virtual ethernet, virtual mass storage device (pendrive) or even other virtual devices like HID, MIDI, or act as a virtual webcam!
It is important to note that, although the model A and A+ can support being a USB slave, they are missing the ID pin (is tied to ground internally) so are unable to dynamically switch between USB master/slave mode. As such, they default to USB master mode. There is no easy way to change this right now.
It is also important to note, that a USB to UART serial adapter is not needed for any of these guides, as may be documented elsewhere across the int

azbesthu

gpio lib for python
http://code.google.com/p/raspberry-gpio-python/downloads/detail?name=python-rpi.gpio_0.4.1a-1_armhf.deb&can=2&q=

http://www.tech-fruits.com/archives/4388

sudo apt-get install lcdproc

wget http://dl.dropbox.com/u/29632026/raspdrivers.tar.gz
extract to hd44780