James Hagerman JamesHagerman

## packet-generator.cpp
/**
 * Hello, and welcome to this brief, but hopefully complete, example file for
 * wireless packet injection using pcap.
 *
 * Although there are various resources for this spread on the web, it is hard
 * to find a single, cohesive piece that shows how everything fits together.
 * This file aims to give such an example, constructing a fully valid UDP packet
 * all the way from the 802.11 PHY header (through radiotap) to the data part of
 * the packet and then injecting it on a wireless interface
 *

## linux_fun.md

      
              1 file
            
          
              35 forks
            
          
              7 comments
            
          
              141 stars
            
          
                marianposaceanu
                / linux_fun.md
            
            
              Last active
              January 29, 2023 20:31
            
              
                How to have some fun using the terminal.
              
          
    Linux fun-o-matic

How to have some fun using the terminal.

Install cowsay [0] via : sudo apt-get install cowsay
Install fortune [1] via : sudo apt-get install fortune
Make sure you have Ruby installed via : ruby -v
Install the lolcat [2] via : gem gem install lolcat
Profit!


## README.md

      
              4 files
            
          
              57 forks
            
          
              58 comments
            
          
              253 stars
            
          
                nickbudi
                / README.md
            
            
              Last active
              February 17, 2024 14:25
            
              
                Budi's Counter-Strike: Global Offensive config
              
          
    Budi's CS:GO Config

This is my constantly updated CS:GO autoexec config. Changelogs can be found under revisions here
Put autoexec.cfg in ...\Steam\steamapps\common\Counter-Strike Global Offensive\csgo\cfg or take what you want from it and add to your autoexec config!
After the Wild West Simulator 2015 update, video.txt needs to be put in ...\Steam\userdata\<Steam3 ID>\730\local\cfg
Launch Options


## colour_converter.py
#   Author: Andrew Fisher
#   Version: 0.1
#   Date: 30/05/2012
#   Licence: BSD

#   This python converts an rgb value expressed in 8 bit values (eg 255, 128, 0) and returns a hex value that
#   has been converted to 565 format. This was highly useful when I was playing with some Arduino
#   stuff requiring 16 bit LCD designs and couldn't remember the hex layout.

def rgb_hex565(red, green, blue):

## readme.txt
This statement grants permissions to any user to perform any S3 action on objects in the specified bucket. However, the request must originate from the range of IP addresses specified in the condition. The condition in this statement identifies 192.168.143.* range of allowed IP addresses with one exception, 192.168.143.188.

Note that the IPAddress and NotIpAddress values specified in the condition uses CIDR notation described in RFC 2632. For more information, go to http://www.rfc-editor.org/rfc/rfc4632.txt.

## .jshintrc.js
// NOTE: I added the .js extension to this gist so it would have syntax highlighting. This file should have NO file extension

{
    // Settings
    "passfail"      : false,  // Stop on first error.
    "maxerr"        : 100,    // Maximum error before stopping.


    // Predefined globals whom JSHint will ignore.
    "browser"       : true,   // Standard browser globals e.g. `window`, `document`.
	/**
	* Hello, and welcome to this brief, but hopefully complete, example file for
	* wireless packet injection using pcap.
	*
	* Although there are various resources for this spread on the web, it is hard
	* to find a single, cohesive piece that shows how everything fits together.
	* This file aims to give such an example, constructing a fully valid UDP packet
	* all the way from the 802.11 PHY header (through radiotap) to the data part of
	* the packet and then injecting it on a wireless interface
	*
	# Author: Andrew Fisher
	# Version: 0.1
	# Date: 30/05/2012
	# Licence: BSD

	# This python converts an rgb value expressed in 8 bit values (eg 255, 128, 0) and returns a hex value that
	# has been converted to 565 format. This was highly useful when I was playing with some Arduino
	# stuff requiring 16 bit LCD designs and couldn't remember the hex layout.

	def rgb_hex565(red, green, blue):
	This statement grants permissions to any user to perform any S3 action on objects in the specified bucket. However, the request must originate from the range of IP addresses specified in the condition. The condition in this statement identifies 192.168.143.* range of allowed IP addresses with one exception, 192.168.143.188.

	Note that the IPAddress and NotIpAddress values specified in the condition uses CIDR notation described in RFC 2632. For more information, go to http://www.rfc-editor.org/rfc/rfc4632.txt.
	// NOTE: I added the .js extension to this gist so it would have syntax highlighting. This file should have NO file extension

	{
	// Settings
	"passfail" : false, // Stop on first error.
	"maxerr" : 100, // Maximum error before stopping.


	// Predefined globals whom JSHint will ignore.
	"browser" : true, // Standard browser globals e.g. `window`, `document`.