Current version: 1.0.19 1.0.15 (as of 2018-12-10)
Realtek GBE USB
- Gigabit ethernet
- USB hub
- Launch
System Preferences
->Network
- See
USB 10/100/1000 LAN
- https://i.imgur.com/Bm7D0Ld.png (mirror)
- https://i.imgur.com/wcMZFh8.png (mirror)
- Launch
System Information
(also known asSystem Profiler
) ->Hardware
->USB
- https://i.imgur.com/NJi9yC4.png (mirror)
- Launch
System Information
(also known asSystem Profiler
) ->Software
->Extensions
- https://i.imgur.com/64QCxxS.png (mirror)
- Launch a terminal/shell
ioreg -p IOUSB -w0
ioreg -p IOUSB -w0 -l
: For more info
+-o Root <class IORegistryEntry, id 0x100000100, retain 14>
+-o Root Hub Simulation Simulation@14000000 <class AppleUSBRootHubDevice, id 0x1000002fa, registered, matched, active, busy 0 (6 ms), retain 13>
+-o USB2.0 Hub @14100000 <class AppleUSBDevice, id 0x1000002fb, registered, matched, active, busy 0 (43 ms), retain 14>
+-o Apple Internal Keyboard / Trackpad@14400000 <class AppleUSBDevice, id 0x1000002ff, registered, matched, active, busy 0 (96 ms), retain 22>
+-o USB3.0 Hub @14500000 <class AppleUSBDevice, id 0x100000363, registered, matched, active, busy 0 (54 ms), retain 15>
| +-o USB 10/100/1000 LAN@14540000 <class AppleUSBDevice, id 0x100000418, registered, matched, active, busy 0 (73 ms), retain 18>
+-o Bluetooth USB Host Controller@14300000 <class AppleUSBDevice, id 0x1000003d8, registered, matched, active, busy 0 (58 ms), retain 24>
Terminal output snippet from `ioreg -p IOUSB -w0 -l`
+-o USB3.0 Hub @14500000 <class AppleUSBDevice, id 0x100000363, registered, matched, active, busy 0 (54 ms), retain 15>
| | {
| | "sessionID" = 2480892594
| | "iManufacturer" = 1
| | "bNumConfigurations" = 1
| | "idProduct" = 2066
| | "bcdDevice" = 37009
| | "Bus Power Available" = 900
| | "USB Address" = 5
| | "bMaxPacketSize0" = 9
| | "iProduct" = 2
| | "iSerialNumber" = 0
| | "bDeviceClass" = 9
| | "Built-In" = No
| | "locationID" = 340787200
| | "bDeviceSubClass" = 0
| | "bcdUSB" = 768
| | "USB Product Name" = "USB3.0 Hub "
| | "PortNum" = 5
| | "non-removable" = "no"
| | "IOCFPlugInTypes" = {"9dc7b780-9ec0-11d4-a54f-000a27052861"="IOUSBFamily.kext/Contents/PlugIns/IOUSBLib.bundle"}
| | "bDeviceProtocol" = 3
| | "IOUserClientClass" = "IOUSBDeviceUserClientV2"
| | "IOPowerManagement" = {"DevicePowerState"=0,"CurrentPowerState"=3,"CapabilityFlags"=65536,"MaxPowerState"=4,"DriverPowerState"=3}
| | "Device Speed" = 3
| | "USB Vendor Name" = "VIA Labs, Inc. "
| | "idVendor" = 8457
| | "IOGeneralInterest" = "IOCommand is not serializable"
| | "IOClassNameOverride" = "IOUSBDevice"
| | }
| |
| +-o USB 10/100/1000 LAN@14540000 <class AppleUSBDevice, id 0x100000418, registered, matched, active, busy 0 (73 ms), retain 18>
| {
| "sessionID" = 3379212797
| "iManufacturer" = 1
| "bNumConfigurations" = 2
| "idProduct" = 33107
| "bcdDevice" = 12288
| "Bus Power Available" = 900
| "USB Address" = 8
| "bMaxPacketSize0" = 9
| "iProduct" = 2
| "iSerialNumber" = 3
| "bDeviceClass" = 0
| "Built-In" = No
| "locationID" = 341049344
| "bDeviceSubClass" = 0
| "bcdUSB" = 768
| "USB Product Name" = "USB 10/100/1000 LAN"
| "PortNum" = 4
| "non-removable" = "no"
| "IOCFPlugInTypes" = {"9dc7b780-9ec0-11d4-a54f-000a27052861"="IOUSBFamily.kext/Contents/PlugIns/IOUSBLib.bundle"}
| "bDeviceProtocol" = 0
| "IOUserClientClass" = "IOUSBDeviceUserClientV2"
| "IOPowerManagement" = {"ChildrenPowerState"=4,"DevicePowerState"=0,"CurrentPowerState"=4,"CapabilityFlags"=32768,"MaxPowerState"=4,"DriverPowerState"=4}
| "Device Speed" = 3
| "USB Vendor Name" = "Realtek"
| "idVendor" = 3034
| "IOGeneralInterest" = "IOCommand is not serializable"
| "USB Serial Number" = "002427FE48F6"
| "IOClassNameOverride" = "IOUSBDevice"
| }
|
- Launch a terminal/shell
ifconfig
en4: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=2b<RXCSUM,TXCSUM,VLAN_HWTAGGING,TSO4>
ether 00:24:27:fe:48:f6
inet 192.168.1.135 netmask 0xffffff00 broadcast 192.168.1.255
media: autoselect (1000baseT <full-duplex,flow-control>)
status: active
The driver is located at
/System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleRTL815X*.kext
/Library/Extensions/AppleRTL815X*.kext
Here are the namespaces:
com.realtek.driver.AppleRTL815XEthernet
com.realtek.driver.AppleRTL815XComposite
See http://osxdaily.com/2015/06/24/load-unload-kernel-extensions-mac-os-x/
With normal operation with only the network cable plugged in, I only see com.realtek.driver.AppleRTL815XEthernet
loaded.
# Unload
sudo kextunload /Library/Extensions/AppleRTL815XEthernet109.kext
sudo kextunload /Library/Extensions/AppleRTL815XComposite109.kext
# Load
sudo kextload /Library/Extensions/AppleRTL815XEthernet109.kext
sudo kextload /Library/Extensions/AppleRTL815XComposite109.kext
# Find if loaded
kextstat | grep com.realtek.driver.AppleRTL815XEthernet
kextstat | grep com.realtek.driver.AppleRTL815XComposite
Perhaps clear the Kernel cache
sudo rm -rf /System/Library/Caches/com.apple.kext.caches
I got a new USB ethernet adapter because the old one had lots of issues (hence the gist in the first place). But it still uses the same Realtek 8153 chip although am using the native driver though now, AppleUSBECM.kext
In terms of my previous issues, I remember that when I clicked the little lock in the browser to view the cert, it would crash my computer. But the disconnects that required a restart were the bigger issue. (personal reference link)
I'm currently running macOS Mojave 10.14
I'm the type of guy that can't tolerate not getting something to work and i've spend hours researching and trying everything but it's clear.....
This card does not work on m1 macpro big sur.
I tried again because the update to this post but here's all that happens. All this is with
csrutil disabled
I go through the installer and I was shown this dialog, but there is not an "allow" button that would normally pop up in security & privacy.
I even went hard and deleted everything from my kext_policies in the SQL lite.
After rebooting there was nothing in disabled extensions. I tried to reinstall and it put it right back in disabled, and the database, and there's no option in security to allow it.
Here is the results of trying to force load it, as you can see the problem isn't security but architecture related.
It doesn't work. Don't even try. I emailed Realtek but of course no response. Anyone in this thread saying they got it to work is not using a realtek 8153 chip, not on big sur or not an m1.