Skip to content

Instantly share code, notes, and snippets.

@austinmarton
Created February 27, 2012 08:40
Show Gist options
  • Save austinmarton/1922600 to your computer and use it in GitHub Desktop.
Save austinmarton/1922600 to your computer and use it in GitHub Desktop.
Send a raw Ethernet frame in Linux
/*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*/
#include <arpa/inet.h>
#include <linux/if_packet.h>
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <sys/ioctl.h>
#include <sys/socket.h>
#include <net/if.h>
#include <netinet/ether.h>
#define MY_DEST_MAC0 0x00
#define MY_DEST_MAC1 0x00
#define MY_DEST_MAC2 0x00
#define MY_DEST_MAC3 0x00
#define MY_DEST_MAC4 0x00
#define MY_DEST_MAC5 0x00
#define DEFAULT_IF "eth0"
#define BUF_SIZ 1024
int main(int argc, char *argv[])
{
int sockfd;
struct ifreq if_idx;
struct ifreq if_mac;
int tx_len = 0;
char sendbuf[BUF_SIZ];
struct ether_header *eh = (struct ether_header *) sendbuf;
struct iphdr *iph = (struct iphdr *) (sendbuf + sizeof(struct ether_header));
struct sockaddr_ll socket_address;
char ifName[IFNAMSIZ];
/* Get interface name */
if (argc > 1)
strcpy(ifName, argv[1]);
else
strcpy(ifName, DEFAULT_IF);
/* Open RAW socket to send on */
if ((sockfd = socket(AF_PACKET, SOCK_RAW, IPPROTO_RAW)) == -1) {
perror("socket");
}
/* Get the index of the interface to send on */
memset(&if_idx, 0, sizeof(struct ifreq));
strncpy(if_idx.ifr_name, ifName, IFNAMSIZ-1);
if (ioctl(sockfd, SIOCGIFINDEX, &if_idx) < 0)
perror("SIOCGIFINDEX");
/* Get the MAC address of the interface to send on */
memset(&if_mac, 0, sizeof(struct ifreq));
strncpy(if_mac.ifr_name, ifName, IFNAMSIZ-1);
if (ioctl(sockfd, SIOCGIFHWADDR, &if_mac) < 0)
perror("SIOCGIFHWADDR");
/* Construct the Ethernet header */
memset(sendbuf, 0, BUF_SIZ);
/* Ethernet header */
eh->ether_shost[0] = ((uint8_t *)&if_mac.ifr_hwaddr.sa_data)[0];
eh->ether_shost[1] = ((uint8_t *)&if_mac.ifr_hwaddr.sa_data)[1];
eh->ether_shost[2] = ((uint8_t *)&if_mac.ifr_hwaddr.sa_data)[2];
eh->ether_shost[3] = ((uint8_t *)&if_mac.ifr_hwaddr.sa_data)[3];
eh->ether_shost[4] = ((uint8_t *)&if_mac.ifr_hwaddr.sa_data)[4];
eh->ether_shost[5] = ((uint8_t *)&if_mac.ifr_hwaddr.sa_data)[5];
eh->ether_dhost[0] = MY_DEST_MAC0;
eh->ether_dhost[1] = MY_DEST_MAC1;
eh->ether_dhost[2] = MY_DEST_MAC2;
eh->ether_dhost[3] = MY_DEST_MAC3;
eh->ether_dhost[4] = MY_DEST_MAC4;
eh->ether_dhost[5] = MY_DEST_MAC5;
/* Ethertype field */
eh->ether_type = htons(ETH_P_IP);
tx_len += sizeof(struct ether_header);
/* Packet data */
sendbuf[tx_len++] = 0xde;
sendbuf[tx_len++] = 0xad;
sendbuf[tx_len++] = 0xbe;
sendbuf[tx_len++] = 0xef;
/* Index of the network device */
socket_address.sll_ifindex = if_idx.ifr_ifindex;
/* Address length*/
socket_address.sll_halen = ETH_ALEN;
/* Destination MAC */
socket_address.sll_addr[0] = MY_DEST_MAC0;
socket_address.sll_addr[1] = MY_DEST_MAC1;
socket_address.sll_addr[2] = MY_DEST_MAC2;
socket_address.sll_addr[3] = MY_DEST_MAC3;
socket_address.sll_addr[4] = MY_DEST_MAC4;
socket_address.sll_addr[5] = MY_DEST_MAC5;
/* Send packet */
if (sendto(sockfd, sendbuf, tx_len, 0, (struct sockaddr*)&socket_address, sizeof(struct sockaddr_ll)) < 0)
printf("Send failed\n");
return 0;
}
Copy link

ghost commented Apr 25, 2015

Thanks for sharing

@apaixao
Copy link

apaixao commented May 29, 2015

Hi Austin,
thanks for the blog.
I was wondering if its possible to create such raw socket without using any headers, no IP headers for example. I am writing an application which I want to inject my payload without any alteration (i.e. without addition of any headers) into the MAC/PHY.

@nmahaba
Copy link

nmahaba commented Mar 30, 2016

In your write application, you create a socket with the protocol as IPPROTO_RAW and set the ether_type as ETH_P_IP. On the other hand in your read application you create a socket with protocol as htons(0x0800) and you don't set ether_type. This works fine for one way communication. I am write an application which communicates in both direction. Once I create a RAW socket, I will use it simultaneously to read and write (via threads). What should be my protocol when creating the RAW socket ? I am sending RAW data over Ethernet (not IP).

@radumos
Copy link

radumos commented Apr 10, 2016

Hello,
To my shame, I don't know how exactly to type my mac address. if i put the numbers without : after 0x in mydestmac0 the compiler says
send_eth.c: In function ‘main’:
send_eth.c:64:2: warning: large integer implicitly truncated to unsigned type [-Woverflow]
eh->ether_dhost[0] = MY_DEST_MAC0;

Can anyone tell me how should i write it?
Thank you

@Josephray
Copy link

Hi,
Can we run this method to send packets to and receive it in the same port ? Like external loopback testing ?
It would be great if anyone can throw some light. If not, is there any other way to do that ?
Thanks.

@Josephray
Copy link

@nmahaba Were you successful in writing the program ? If yes, can you please share with me . Thanks

@pavlosantoniou
Copy link

@radumos
Suppose you have the following MAC-48 address (in the usual format of six groups of two hexadecimal digits each):

00:11:22:33:44:55

This is how the #define directives must look like:

#define MY_DEST_MAC0    0x00
#define MY_DEST_MAC1    0x11
#define MY_DEST_MAC2    0x22
#define MY_DEST_MAC3    0x33
#define MY_DEST_MAC4    0x44
#define MY_DEST_MAC5    0x55

@Yanpas
Copy link

Yanpas commented Feb 13, 2017

line 42 strcpy(ifName, argv[1]); - buffer overflow is possible

@SRJanel
Copy link

SRJanel commented Feb 14, 2017

Why are you filling the sll_addr field of the sockaddr_ll structure ? Is that necessary ?
You are coding with raw sockets, therefore you are already filling the physical layer address in the ethernet frame, so in my opinion it is not required.

@RenaKunisaki
Copy link

It works on eth0, but gives "send failed" on wlan0, any idea?

@INT0x00
Copy link

INT0x00 commented Dec 14, 2017

i define iphdr but it's never used. is it just as example for how u can fill the frame?
other than that nice clean example, thanks

@JFKane
Copy link

JFKane commented Feb 14, 2018

Same result as @RenaKunisaki, except for vlan on eth0

@AdrianTay
Copy link

Hi. I had tried to run the code but i got "socket: Operation not permitted
SIOCGIFINDEX: Bad file descriptor
SIOCGIFHWADDR: Bad file descriptor
Send failed"
I had tried to fix it by using the methods proposed but still no avail. Can anyone guide me?

@gcou
Copy link

gcou commented May 17, 2018

Can this be used to write an arbitrary 802.11 frame like a custom SSID beacon?

@sundeep95
Copy link

For sudo ./sendRawEth wlan0 command,
it was giving following error output
SIOCGIFINDEX: No such device
SIOCGIFHWADDR: No such device
Send failed
Can someone help in resolving this

@saitej25
Copy link

For sudo ./sendRawEth wlan0 command,
it was giving following error output
SIOCGIFINDEX: No such device
SIOCGIFHWADDR: No such device
Send failed
Can someone help in resolving this

Run with sudo

@nxtxnt
Copy link

nxtxnt commented Nov 17, 2018

It works on eth0, but gives "send failed" on wlan0, any idea?

Because it's an ethernet frame ?

@devendranaga
Copy link

Hi. I had tried to run the code but i got "socket: Operation not permitted
SIOCGIFINDEX: Bad file descriptor
SIOCGIFHWADDR: Bad file descriptor
Send failed"
I had tried to fix it by using the methods proposed but still no avail. Can anyone guide me?

you dont have a wlan0. what is your wireless interface name ? ifconfig ?

@drafterleo
Copy link

How about to add close(sockfd); at the end? :)

@cyantarek
Copy link

Is it possible to run the src and destination to the same PC mac address?

@arjunnasa
Copy link

what about crc checksum after the payload?

@shahriarbasiri
Copy link

Is IPPROTO_RAW a valid option for AF_PACKET SOCK_RAW socket? However it doesn't matter for sending raw ethernet packet:)

@circl-lastname
Copy link

circl-lastname commented Mar 29, 2023

By using raw sockets is it possible full duplex communication of Ethernet frames

If your Ethernet controller is in Full Duplex mode then it will always do so regardless, if it's in Half Duplex then no

@mgulsoy
Copy link

mgulsoy commented May 23, 2023

Thanks for sharing. It helped a lot.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment