Skip to content

Instantly share code, notes, and snippets.

View chasset's full-sized avatar

Pierre-Olivier chasset

View GitHub Profile
nealfennimore / wireguard.conf
Last active July 21, 2024 13:38
Wireguard VPN - Forward all traffic to server
# ------------------------------------------------
# Config files are located in /etc/wireguard/wg0
# ------------------------------------------------
# ---------- Server Config ----------
Address = # IPV4 CIDR
Address = fd86:ea04:1111::1/64 # IPV6 CIDR
PostUp = iptables -A FORWARD -i wg0 -j ACCEPT; iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE; ip6tables -A FORWARD -i wg0 -j ACCEPT; ip6tables -t nat -A POSTROUTING -o eth0 -j MASQUERADE # Add forwarding when VPN is started
PostDown = iptables -D FORWARD -i wg0 -j ACCEPT; iptables -t nat -D POSTROUTING -o eth0 -j MASQUERADE; ip6tables -D FORWARD -i wg0 -j ACCEPT; ip6tables -t nat -D POSTROUTING -o eth0 -j MASQUERADE # Remove forwarding when VPN is shutdown
jeromecoupe / webstoemp-gulpfile.js
Last active January 21, 2024 16:28
Gulp 4 sample gulpfile.js. For a full explanation, have a look at
"use strict";
// Load plugins
const autoprefixer = require("autoprefixer");
const browsersync = require("browser-sync").create();
const cp = require("child_process");
const cssnano = require("cssnano");
const del = require("del");
const eslint = require("gulp-eslint");
const gulp = require("gulp");
SeriousM / .md
Last active February 14, 2022 14:39
Logout all users from meteor application
category value sector
UK production emissions 632 UK
Carbon flows from EU 88 EU
Carbon flows to EU -61 EU
Carbon flows from other Annex 1 82 Annex 1
Carbon flows to other Annex 1 -39 Annex 1
Carbon flows from non-Annex 1 104 Other non-Annex 1
Carbon flows from non-Annex 1 64 China
Carbon flows to non-Annex 1 -25 Non-Annex 1
UK consumption emissions 845 UK
econandrew /
Last active July 12, 2024 15:45
Instructions for installing an OpenStreetMap Nominatim geocoder instance on Amazon Linux / EC2 (Dec 2014)

Installing Nominatim on Amazon Linux / EC2

  1. Introduction

The official instructions for installing Nominatim are complete, but brief in places, and several steps must be changed in the Amazon Linux environment (which is roughly CentOS / Redhat). The steps below are rough record of what I did to get it working, but I didn't keep perfect track so you shouldn't rely on them as a shell script. Just follow each step, make sure it worked, and hopefully you'll need to adapt very little (version numbers, for one thing). (I also skip in and out of root, but you can be more careful if you like.)

  1. Setting up the EC2 instance

dsamojlenko /
Last active November 8, 2020 14:59
Import GTFS data to MongoDB
mongoimport --db <dbname> --collection agencies --type csv --headerline --file agency.txt
mongoimport --db <dbname> --collection calendardates --type csv --headerline --file calendar_dates.txt
mongoimport --db <dbname> --collection calendars --type csv --headerline --file calendar.txt
mongoimport --db <dbname> --collection routes --type csv --headerline --file routes.txt
mongoimport --db <dbname> --collection stoptimes --type csv --headerline --file stop_times.txt
mongoimport --db <dbname> --collection stops --type csv --headerline --file stops.txt
mongoimport --db <dbname> --collection trips --type csv --headerline --file trips.txt
isaacs /
Last active July 21, 2024 01:20
Use one of these techniques to install node and npm without having to sudo. Discussed in more detail at Note: npm >=0.3 is *safer* when using sudo.
echo 'export PATH=$HOME/local/bin:$PATH' >> ~/.bashrc
. ~/.bashrc
mkdir ~/local
mkdir ~/node-latest-install
cd ~/node-latest-install
curl | tar xz --strip-components=1
./configure --prefix=~/local
make install # ok, fine, this step probably takes more than 30 seconds...
curl | sh