francoism90/README.md

## README.md

      
    Raw
  

              README.md
            
          
    Warning


Following instructions are provided without any warranty, and may even get you in trouble legally.
The instructions are provided for testing, and should be use with care.
We (including commentators) are not responsible for any damage to your device(s).

Introduction

This may enable additional channels and power (in most cases don't) on ASUS Merlin provided routers.
The nvram settings have been tested on a ASUS RT-AX58U, they may work on other models as well (ASUS RT-AC78U).
Please use nvram dump and adjust when needed, as they may differ on your device!
Credits to the commentators below, and members on the SNBForums posting instructions. Please post your findings, and help others when needed. :)
Login into router using SSH

See https://www.htpcguides.com/enable-ssh-asus-routers-without-ssh-keys/ for instructions.
Backup current settings

nvram dump > dump.txt

NOTE: You need to copy the dump.txt (or output by nvram dump to somewhere else), as they will be lost on reboot

JFFS custom scripts and configs


Make sure Enable JFFS custom scripts and configs, is enabled in System settings.
See https://github.com/RMerl/asuswrt-merlin.ng/wiki/User-scripts for details.

Make sure to also run the following commands:
nvram set jffs2_scripts="1"
nvram commit
User-scripts

Create the /jffs/scripts/wl file, and paste the nvram overwrites into this file (see given example file).
Create/adjust /jffs/scripts/init-start:
#!/bin/sh

[ -x /jffs/scripts/wl ] && /jffs/scripts/wl &
# [ -x /jffs/addons/AdGuardHome.d/AdGuardHome.sh ] && /jffs/addons/AdGuardHome.d/AdGuardHome.sh init-start & # place before addons
Create/adjust /jffs/scripts/services-start:
#!/bin/sh

/jffs/scripts/wl >/dev/null 2>&1 & # wl
# /jffs/scripts/scmerlin startup & # scMerlin
Create/adjust /jffs/scripts/service-event:
#!/bin/sh

if echo "$2" | /bin/grep -q "wireless"; then { /jffs/scripts/wl service_event "$@" & }; fi # wl
Create/adjust /jffs/scripts/service-event-end:
#!/bin/sh

if echo "$2" | /bin/grep -q "wireless"; then { /jffs/scripts/wl service_event "$@" & }; fi # wl
Make sure the scripts are executable:
chmod a+rx /jffs/scripts/*
Applying changes

You need to reboot the router to apply changes:
reboot
To make the changes persistent, make sure to add them to the jffs/scripts/wl script.

  
## wl
#!/bin/sh

# Allow all channels
nvram set location_code=#a
nvram set 0:ccode=#a
nvram set 0:regrev=0
nvram set 1:ccode=#a
nvram set 1:regrev=0
nvram set territory_code=CN/02 # or US/02
nvram set wl_country_code=#a
nvram set wl_reg_mode=h
nvram set wl0_chlist="1 2 3 4 5 6 7 8 9 10 11 12 13 14"
nvram set wl0_country_code=#a
nvram set wl0_country_rev=0
nvram set wl0_reg_mode=h
nvram set wl1_chlist="36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165 169 173 177"
nvram set wl1_country_code=#a
nvram set wl1_country_rev=0
nvram set wl1_reg_mode=h
nvram set acs_dfs=0
nvram set wl_acs_excl_chans_dfs=
nvram set wl_acs_excl_chans=
nvram set wl0_acs_dfs=0
nvram set wl0_acs_excl_chans_base=
nvram set wl0_acs_excl_chans=
nvram set wl1_acs_dfs=0
nvram set wl1_acs_excl_chans_base=
nvram set wl1_acs_excl_chans=
nvram set acs_unii4=1

# Channel selection
# nvram set wl0_chanspec=0 # auto select
# nvram set wl1_chanspec=0 # auto select
# nvram set wl_chanspec=0 # auto select
# nvram set wl0_sel_channel=7/80 # force 2.4GHz channel
# nvram set wl1_sel_channel=149/80 # force 5GHz channel

# Set TX-Power (risky!)
nvram set 0:maxp2ga0=120
nvram set 0:maxp2ga1=120
nvram set 1:maxp5gb0a0=120
nvram set 1:maxp5gb0a1=120
nvram set 1:maxp5gb0a2=120
nvram set 1:maxp5gb0a3=120
nvram set 1:maxp5gb1a0=120
nvram set 1:maxp5gb1a1=120
nvram set 1:maxp5gb1a2=120
nvram set 1:maxp5gb1a3=120
nvram set 1:maxp5gb2a0=120
nvram set 1:maxp5gb2a1=120
nvram set 1:maxp5gb2a2=120
nvram set 1:maxp5gb2a3=120
nvram set 1:maxp5gb3a0=120
nvram set 1:maxp5gb3a1=120
nvram set 1:maxp5gb3a2=120
nvram set 1:maxp5gb3a3=120
nvram set 1:maxp5gb4a0=120
nvram set 1:maxp5gb4a1=120
nvram set 1:maxp5gb4a2=120
nvram set 1:maxp5gb4a3=120
nvram set wl0_txpower=500
nvram set wl1_txpower=500
nvram set wl_txpower=500

# Commit changes
nvram commit
	#!/bin/sh

	# Allow all channels
	nvram set location_code=#a
	nvram set 0:ccode=#a
	nvram set 0:regrev=0
	nvram set 1:ccode=#a
	nvram set 1:regrev=0
	nvram set territory_code=CN/02 # or US/02
	nvram set wl_country_code=#a
	nvram set wl_reg_mode=h
	nvram set wl0_chlist="1 2 3 4 5 6 7 8 9 10 11 12 13 14"
	nvram set wl0_country_code=#a
	nvram set wl0_country_rev=0
	nvram set wl0_reg_mode=h
	nvram set wl1_chlist="36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165 169 173 177"
	nvram set wl1_country_code=#a
	nvram set wl1_country_rev=0
	nvram set wl1_reg_mode=h
	nvram set acs_dfs=0
	nvram set wl_acs_excl_chans_dfs=
	nvram set wl_acs_excl_chans=
	nvram set wl0_acs_dfs=0
	nvram set wl0_acs_excl_chans_base=
	nvram set wl0_acs_excl_chans=
	nvram set wl1_acs_dfs=0
	nvram set wl1_acs_excl_chans_base=
	nvram set wl1_acs_excl_chans=
	nvram set acs_unii4=1

	# Channel selection
	# nvram set wl0_chanspec=0 # auto select
	# nvram set wl1_chanspec=0 # auto select
	# nvram set wl_chanspec=0 # auto select
	# nvram set wl0_sel_channel=7/80 # force 2.4GHz channel
	# nvram set wl1_sel_channel=149/80 # force 5GHz channel

	# Set TX-Power (risky!)
	nvram set 0:maxp2ga0=120
	nvram set 0:maxp2ga1=120
	nvram set 1:maxp5gb0a0=120
	nvram set 1:maxp5gb0a1=120
	nvram set 1:maxp5gb0a2=120
	nvram set 1:maxp5gb0a3=120
	nvram set 1:maxp5gb1a0=120
	nvram set 1:maxp5gb1a1=120
	nvram set 1:maxp5gb1a2=120
	nvram set 1:maxp5gb1a3=120
	nvram set 1:maxp5gb2a0=120
	nvram set 1:maxp5gb2a1=120
	nvram set 1:maxp5gb2a2=120
	nvram set 1:maxp5gb2a3=120
	nvram set 1:maxp5gb3a0=120
	nvram set 1:maxp5gb3a1=120
	nvram set 1:maxp5gb3a2=120
	nvram set 1:maxp5gb3a3=120
	nvram set 1:maxp5gb4a0=120
	nvram set 1:maxp5gb4a1=120
	nvram set 1:maxp5gb4a2=120
	nvram set 1:maxp5gb4a3=120
	nvram set wl0_txpower=500
	nvram set wl1_txpower=500
	nvram set wl_txpower=500

	# Commit changes
	nvram commit