ryancdavison

iPad Pro 12.9" (2020) Magic Keyboard Portrait Mode DIY Smart Connector Cable

I wanted my iPad Pro to be able to use the Magic Keyboard in portrait mode, but the current Smart Connector configuration does not allow this. With too much time on my hands, I made a short jumper cable using a section of USB cable, 5-pin POGO connectors (the 5-pin works using pins 1, 3, and 5, and removing pins 2 and 4), a small electrical project box, 3mm N52 magnets, and some epoxy and Sugru to pack everything into place. My cable and connections orientation had more to do with the boxes I found to encase the connector (with holes on the small end) than anything else. Obviously, there will be many ways to do this.

WARNING: Getting any of these steps wrong will probably ruin your iPad.

Note: These measurements are for the 12.9" (2020) model. The magnets did not line up and the polarity was different for my wife's iPad Pro 11" (2021).

![iPad-Pro-MmagicKeyboard-Jumper-Cable-min](https://user-images.githubusercontent.c

szxp

#!/bin/sh

# BSD 3-Clause License
# 
# Copyright (c) 2017, Péter Szakszon
# All rights reserved.
# 
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
# 

mareksuscak

#!/bin/bash

# Thanks goes to @pete-otaqui for the initial gist:
# https://gist.github.com/pete-otaqui/4188238
#
# Original version modified by Marek Suscak
#
# works with a file called VERSION in the current directory,
# the contents of which should be a semantic version number
# such as "1.2.3" or even "1.2.3-beta+001.ab"

hellerbarde

Latency numbers every programmer should know

L1 cache reference ......................... 0.5 ns
Branch mispredict ............................ 5 ns
L2 cache reference ........................... 7 ns
Mutex lock/unlock ........................... 25 ns
Main memory reference ...................... 100 ns             
Compress 1K bytes with Zippy ............. 3,000 ns  =   3 µs
Send 2K bytes over 1 Gbps network ....... 20,000 ns  =  20 µs
SSD random read ........................ 150,000 ns  = 150 µs

Read 1 MB sequentially from memory ..... 250,000 ns = 250 µs

NTICompass

<?php
/**
 * QR Code + Logo Generator
 *
 * http://labs.nticompassinc.com
 */
$data = isset($_GET['data']) ? $_GET['data'] : 'http://labs.nticompassinc.com';
$size = isset($_GET['size']) ? $_GET['size'] : '200x200';
$logo = isset($_GET['logo']) ? $_GET['logo'] : FALSE;