Tutorial for running Meteor in Windows using Vagrant

meteor-windows-vagrant-tutorial.md

Tutorial: Meteor in Windows using Vagrant

BEFORE YOU CONTINUE:

• Now, Meteor runs in any Windows without any line of this tutorial. Just download the Meteor binary! Yay!!
• mrt is no longer used with Meteor 1.0

These days some people were discussing at meteor-talk group about running Meteor at Windows and I’ve recommended them using Vagrant. It’s a very developer-friendly piece of software that creates a virtual machine (VM) which let you run any operating system wanted and connect to it without big efforts of configuration (just make the initial installation and you have it working).

Many packages (I've tested) for running Meteor+Vagrant fails because Meteor writes its mongodb file and also other files inside local build folder into a shared folder between the Windows host and the Linux guest, and it simply does not work. So I've put my brain to work and found a solution: do symlinks inside the VM (but do not use ln. Use mount so git can follow it). It’s covered on steps 8 to 15.

If you have no idea what I’m talking about, I’ve made a tutorial to install Ubuntu Precise x86 through Windows command-line with Meteor very simple to follow:

Requirements

• Download VirtualBox: https://www.virtualbox.org/wiki/Downloads (Vagrant runs on top of VirtualBox, so you need it)
• Download latest Vagrant: http://downloads.vagrantup.com/
• Download git: http://git-scm.com/download/win (It will install ssh binaries required by Vagrant and let you connect to the VM)
• Create a folder to store your Vagrant files + Meteor project
• Download this script and save it as meteor.sh into that folder: https://gist.github.com/gabrielhpugliese/5471763/raw/6bc6f616842c75669d1c6f28ce7cd714fa28967e/meteor.sh

Steps on Windows command-line:

1. Go to Start Menu > Type cmd > SHIFT + ENTER (to login as Administrator)
2. cd C:\path\to\your\vagrant+meteor\project\folder
3. set PATH=%PATH%;C:\Program Files (x86)\Git\bin (Append git binaries to path so vagrant can run ssh)
4. vagrant init precise32 http://files.vagrantup.com/precise32.box (To install Ubuntu 10.04 x86)
5. Edit the Vagrantfile with your preferred editor and add those four lines anywhere inside the Vagrant.configure(“2”) block:

config.vm.provision :shell, :path => "meteor.sh"
config.vm.network :forwarded_port, guest: 3000, host: 3000
config.vm.provider "virtualbox" do |v|
    v.customize ["setextradata", :id, "VBoxInternal2/SharedFoldersEnableSymlinksCreate/v-root", "1"]
end

7. vagrant up (It will download box, configure meteor and get it up)
8. vagrant ssh (It will connect on the VM and expose its command-line)

Now that you are inside the VM command-line, you can use it as your server:

Steps on Ubuntu command-line:

1. cd /vagrant (This is by default shared with the host)
2. mrt create ~/meteorapp
3. mrt create meteorapp && cd meteorapp && rm -rf .meteor && mkdir .meteor/ (Check your Windows folder you’ve created. It will be there!)
4. Input these lines:

sudo mount --bind /home/vagrant/meteorapp/.meteor/ /vagrant/meteorapp/.meteor/
echo “sudo mount --bind /home/vagrant/meteorapp/.meteor/ /vagrant/meteorapp/.meteor/” >> ~/.bashrc && source ~/.bashrc
mrt run

5. Go to http://localhost:3000 in Windows browser and see it running! :)

The point here is to use the .meteor folder of your app pointing to another place inside the VM (run ls -la .meteor/ on command-line and you will see the symbolic link), so Meteor uses the VM folder, not Windows folder, and won’t have permissions problems. You will also need to do all git flow inside Ubuntu command-line, because Windows can’t follow those links.

Hints:

• Make sure you do version control INSIDE THE VM, so the software can follow the symlink.
• To halt a vagrant VM: vagrant halt
• To restart a vagrant VM without running all Meteor installation again: vagrant reload --no-provision or just remove the shell path you’ve put on Vagrantfile on line 10.
• To destroy a VM: vagrant destroy

That’s it. There's a project that does it automatically in win.meteor.com

Hope you like it,

Gabriel Pugliese

@gabrielsapo

VirtualBox no longer working on 'some' random windows installs since a few months... Way to go Oracle !

I created a fork of this gist and updated it to work with Meteor 1.0.

• Vagrant 1.6.5
• No more mrt
• Ubuntu 14.04

Please note the first official Windows preview from MDG.

Thanks for all optimizations guys. Added the official windows preview link to the gist!

@gabrielhpugliese: As of Meteor 1.0.2, setting the METEOR_WATCH_FORCE_POLLING environment variable is recommended for users of shared filesystems like Vagrant/Virtualbox's vboxsf which do not support efficient change notification events. (Without this env var it will still work but will only check for changes every 5 seconds.) Maybe you can update the tutorial to tell users to set this (and explain how to set it)?

Following @ahoereth, I updated his gist: https://gist.github.com/gabrieljenik/d926cbb90706d95abdee

Thank you very much , very usefull for me ;)

Excellent tutorial. Just finished installing everything successfully on Windows 8.1 Pro. After that i started reading thread posts and noticed there are updated forks / versions of the same process avaialble now. The question is Do i need to update my node from v0.8.23 to the latest version which is v0.10.36 ? if yes then what is the best way to do it ? Does Meteor preview for windows supports iron router and all other stuff ? https://github.com/meteor/meteor/wiki/Preview-of-Meteor-on-Windows

Are there any easier instructions on installing this with Vagrant?? I'm stuck on # 3-5 and #1-2 on the "Steps on Windows command-line:" Is there a reason for "Steps on Ubuntu command-line::" instructions?

anyone else having issues with running mrt? I receive an error message saying command doesn't exist.

@powpow12: mrt doesn't exists anymore and is replaced with the 'meteor' command :)

excellent, I actually was about to track this down on my own. Now my only outstanding issue is I have the vagrant server running on localhost:3000 but I can't pull it up on my windows browser. I was able to confirm the server is working by opening up another instance and using the curl command. Any help would be appreciated.

Here is a way to perform version control on the host. Instead of moving .meteor and then mounting it at the original place all we need is to make symbolic links work and specify a non-default MongoDB location.

Warning VirtualBox doesn't support symlinks for security reasons. The following solution may impose even greater risk because of the use of the administrator privilege.

Based on this discussion here is how to do it:

• Run Windows command shell as administrator
• Execute in the shell fsutil behavior set SymlinkEvaluation L2L:1 R2R:1 L2R:1 R2L:1
• Edit your Vagrantfile and include

  config.vm.provider "virtualbox" do |v|
    v.customize ["setextradata", :id, "VBoxInternal2/SharedFoldersEnableSymlinksCreate/meteor", "1"]
  end

• Run vagrant as administrator. You can start it from the same shell as you were using for the first couple of steps or start another one.
• meteor create your project in the shared directory.
• Install MongoDB on the guest.
• Execute export MONGO_URL=mongodb://localhost:27017/your_db_name
• Update meteor to the WINDOWS_PREVIEW release: meteor update --release WINDOWS-PREVIEW@0.2.0 Otherwise the app wont' rebuild after the source code changes. The version has better support for windows file system quirks. However, it may not support some other functionality.
• cd to the app directory, run meteor and enjoy.

I had to tweak a bit the meteor.js script to get the gpg key from the ubuntu server:

#!/bin/bash
sudo apt-get update
sudo apt-get install python-software-properties
sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv 7F0CEB10
echo "deb http://downloads-distro.mongodb.org/repo/ubuntu-upstart dist 10gen" | sudo tee -a /etc/apt/sources.list.d/10gen.list
sudo apt-get update
sudo apt-get install -y git mongodb-10gen curl
cd /usr/local
sudo wget http://nodejs.org/dist/v0.10.11/node-v0.10.11-linux-x86.tar.gz
sudo tar -xvzf node-v0.10.11-linux-x86.tar.gz --strip=1
sudo rm -f node-v0.10.11-linux-x86.tar.gz
curl https://install.meteor.com | sudo sh
sudo npm install -g meteorite

I have updated the "Before you continue" section. Meteor has a installer for Windows now!

Thanks for the tutorial. I installed the Windows version. But, the Windows version of Meteor does not allow calling meteor run android-device.. I checked into port forwarding and it is doable, although may present some headaches. Anyway, I am wondering if anyone has gotten the Vagrant method working and with running / connecting to an Android device.

Just wanted to use vagrant on my windows machine, tried the vagrant file above and saw it was some kind of outdated so I changed it to something more up-to-date and noob friendly:

#!/bin/bash

sudo apt-get update

#1. Install git and curl
sudo apt-get install -y git curl
#2. Update the os
sudo apt-get update
#3. Go to the local user directory
cd /usr/local
#4. Download NodeJS
sudo wget http://nodejs.org/dist/v0.10.11/node-v0.10.11-linux-x86.tar.gz
#5. Unpack and install NodeJS
sudo tar -xvzf node-v0.10.11-linux-x86.tar.gz --strip=1
#6. Remove the tar.gz file
rm -f node-v0.10.11-linux-x86.tar.gz
#7. And last but not least, install meteor itself
curl https://install.meteor.com | sudo sh
#8. Oh yeah, run the meteor help command to let meteor do soem startup stuff
meteor --help

Thanks a lot for the symlink tip!