|# Source: https://askubuntu.com/questions/912498/tl-wn722n-is-not-recognized|
|sudo apt-get install git dkms git make build-essential|
|sudo git clone https://github.com/lwfinger/rtl8188eu.git|
|sudo dkms add ./rtl8188eu|
|sudo dkms build 8188eu/1.0|
|sudo dkms install 8188eu/1.0|
|sudo modprobe 8188eu|
Feb 23, 2018
Yes, it worked! Even in several computers, no problems at all. You just need to plug it out and stick it in again when you get this error: 'modprobe: ERROR: could not insert '8188eu', repeating the command 'sudo modprobe 8188eu'. Perfect. Thank you so much
Feb 26, 2018
If you get 'modprobe: ERROR: could not insert '8188eu', you can get the current driver module name by typing
sudo lshw -C network (source: https://askubuntu.com/a/333430) then removing it with
sudo modprobe -r currentDriverName (source: https://unix.stackexchange.com/a/246881) and finally
sudo modprobe 8188eu
Aug 15, 2018
So many thanks, your info helped me a lot.
Aug 18, 2018
I have a problem with monitor mode.
PHY Interface Driver Chipset
phy0 wlo1 iwlwifi Intel Corporation Device a370 (rev 10)
null wlx503eaa5a11b0 r8188eu
---> this is what is print and i can't use monitor mode.
dmesg | grep wlx503eaa5a11b0
[ 21.009985] r8188eu 1-3:1.0 wlx503eaa5a11b0: renamed from wlan0
[ 37.644223] IPv6: ADDRCONF(NETDEV_UP): wlx503eaa5a11b0: link is not ready
[ 38.078055] IPv6: ADDRCONF(NETDEV_UP): wlx503eaa5a11b0: link is not ready
[ 38.306442] IPv6: ADDRCONF(NETDEV_UP): wlx503eaa5a11b0: link is not ready
[ 41.103295] IPv6: ADDRCONF(NETDEV_CHANGE): wlx503eaa5a11b0: link becomes ready
wlx503eaa5a11b0 is network interface for my TL-WN722N. Any help please?
Sep 29, 2018
Oct 30, 2018
Thanks a lot man!!!!!!!!!!!!!!
It works on me.
After completing all of commands I just restarted my PC.
Works great Thanx!!!