Skip to content

Instantly share code, notes, and snippets.

Avatar

Chris hinzundcode

View GitHub Profile
View container.c
#define _GNU_SOURCE
#include <errno.h>
#include <sched.h>
#include <signal.h>
#include <stdio.h>
#include <stdlib.h>
#include <sys/mount.h>
#include <sys/stat.h>
#include <sys/syscall.h>
#include <sys/types.h>
@nakami
nakami / cs_video_resources.md
Last active Dec 15, 2020
video resources on computer science related topics
View cs_video_resources.md
@gbaman
gbaman / HowToOTGFast.md
Last active Sep 20, 2021
Simple guide for setting up OTG modes on the Raspberry Pi Zero, the fast way!
View HowToOTGFast.md

Setting up Pi Zero OTG - The quick way (No USB keyboard, mouse, HDMI monitor needed)

More details - http://blog.gbaman.info/?p=791

For this method, alongside your Pi Zero, MicroUSB cable and MicroSD card, only an additional computer is required, which can be running Windows (with Bonjour, iTunes or Quicktime installed), Mac OS or Linux (with Avahi Daemon installed, for example Ubuntu has it built in).
1. Flash Raspbian Jessie full or Raspbian Jessie Lite onto the SD card.
2. Once Raspbian is flashed, open up the boot partition (in Windows Explorer, Finder etc) and add to the bottom of the config.txt file dtoverlay=dwc2 on a new line, then save the file.
3. If using a recent release of Jessie (Dec 2016 onwards), then create a new file simply called ssh in the SD card as well. By default SSH i

@makcuk
makcuk / tap-linux.py
Created Jan 29, 2016
A simple python tun/tap udp tunnel example
View tap-linux.py
# Simple linux tun/tap device example tunnel over udp
# create tap device with ip tuntap add device0 tap
# set ip address on it and run tap-linux on that device and set desitation ip
# run same on another node, changing dst ip to first node
import fcntl
import struct
import os
import socket
import threading
@gbaman
gbaman / HowToOTG.md
Last active Sep 20, 2021
Simple guide for setting up OTG modes on the Raspberry Pi Zero
View HowToOTG.md

Raspberry Pi Zero OTG Mode

Simple guide for setting up OTG modes on the Raspberry Pi Zero - By Andrew Mulholland (gbaman).

The Raspberry Pi Zero (and model A and A+) support USB On The Go, given the processor is connected directly to the USB port, unlike on the B, B+ or Pi 2 B, which goes via a USB hub.
Because of this, if setup to, the Pi can act as a USB slave instead, providing virtual serial (a terminal), virtual ethernet, virtual mass storage device (pendrive) or even other virtual devices like HID, MIDI, or act as a virtual webcam!
It is important to note that, although the model A and A+ can support being a USB slave, they are missing the ID pin (is tied to ground internally) so are unable to dynamically switch between USB master/slave mode. As such, they default to USB master mode. There is no easy way to change this right now.
It is also important to note, that a USB to UART serial adapter is not needed for any of these guides, as may be documented elsewhere across the int

@boopathi
boopathi / README.md
Last active Jul 22, 2021
Creating a Swift-ReactNative project
View README.md

Settings

  1. Create a project in XCode with the default settings
    • iOS > Application > Single View Application
    • Language: Swift
  2. Under project General settings, add ReactKit to Linked Framework and Libraries
    • + > Add Other... and choose /path/to/react-native/ReactKit/ReactKit.xcodeproj
  3. Now ReactKit would have been imported. Link it by choosing it from the list.
    • + > lib.ReactKit.a
  4. Under project Build Settings,
@kenkeiter
kenkeiter / lmutracker.mm
Last active Apr 20, 2017
Read lux measurement using MBP ambient light sensor.
View lmutracker.mm
// lmutracker.mm -- Provides lux measurement using MacBook Ambient Light Sensor
//
// clang -o lmutracker lmutracker.mm -framework IOKit -framework CoreFoundation
//
// Adaptation of code originally posted at https://bugzilla.mozilla.org/show_bug.cgi?id=793728
// by Reuben Morais. Modified by Ken Keiter <ken@kenkeiter.com> to output a single *lux* value
// and exit, rather than repeating measurements on the sensor's arbitrary scale.
#include <mach/mach.h>
#include <math.h>
@kavu
kavu / example.go
Created Sep 28, 2013
Minimal Golang + Cocoa application using CGO. Build with `CC=clang go build`
View example.go
package main
/*
#cgo CFLAGS: -x objective-c
#cgo LDFLAGS: -framework Cocoa
#import <Cocoa/Cocoa.h>
int
StartApp(void) {
[NSAutoreleasePool new];
View app_bootstrap.php
<?php
use Silex\Application;
use Demo\Entity\Post;
use Demo\Controller\PostController;
$app = new Application;
$app['route_class'] = 'CustomRoute';
$app['dispatcher']->addSubscriber(new TemplateRenderingListener($app));
@glacjay
glacjay / tun-ping-linux.py
Created Sep 18, 2010
Reading/writing Linux's TUN/TAP device using Python.
View tun-ping-linux.py
import fcntl
import os
import struct
import subprocess
# Some constants used to ioctl the device file. I got them by a simple C
# program.
TUNSETIFF = 0x400454ca
TUNSETOWNER = TUNSETIFF + 2