Skip to content

Instantly share code, notes, and snippets.

@FrenchBen
FrenchBen / adb-firetv-cmd.sh
Created July 15, 2021 01:02
List of commands available for ADB against FireTV smart TV
# Connect to TV
adb connect <TV_IP>
# verify devices
adb devices
# list installed packages
adb shell pm list packages -f -3
# list all packages
adb shell pm list packages -f
@hwhw
hwhw / cc2538-and-openocd.md
Last active November 16, 2023 20:20
Flashing CC2538 using OpenOCD (&UART)

Flashing CC2538 using OpenOCD (&UART)

Problem description

CC2538 SoCs are Cortex-M4 based SoCs by Texas Instruments for 802.15.4 PAN networking, especially for Zigbee communication using their Zigbee Stack solution. It also is a solid foundation for hobbyist-grade solutions involving Zigbee communication, especially for running a self-implemented Zigbee coordinator (often called "Zigbee gateway" in commercial distribution of similar tech). Software-wise, this is usually done by running "ZNP" (Zigbee Network Processor) firmware on the SoC and using a separate controller/computer to act as the "ZAP" (Zigbee Application Processor). In a hobbyist setting, the former is usually a cheap module from china containing the chip, capacitors and an antenna or antenna connector, while the latter is e.g. a Raspberry Pi or an Intel NUC or whatever floats your boat. The API between both components is specified and so the software side on the ZAP does not need to bother with Zigbee communication states but can act on a

@unoexperto
unoexperto / patch_apk_for_sniffing.md
Last active May 13, 2024 04:15
How to patch Android app to sniff its HTTPS traffic with self-signed certificate

How to patch Android app to sniff its HTTPS traffic with self-signed certificate

  • Download apktool from https://ibotpeaches.github.io/Apktool/
  • Unpack apk file: java -jar /home/expert/work/tools/apktool.jar d net.flixster.android-9.1.3@APK4Fun.com.apk
  • Modify AndroidManifest.xml by adding android:networkSecurityConfig="@xml/network_security_config" attribute to application element.
  • Create file /res/xml/network_security_config.xml with following content:
<?xml version="1.0" encoding="utf-8"?>
<network-security-config>
    <base-config>