maz3max

[mcu]
serial: /dev/ttyAMA0
baud: 125000
restart_method: command

[printer]
kinematics: delta
max_velocity: 300
max_accel: 3000
max_z_velocity: 150

maz3max

# Anycubic delta kossel Plus klipper config file (copy it to ~/printer.cfg)
# correct USB port
# DO NOT COPY THIS FILE WITHOUT CAREFULLY READING AND UPDATING IT
# FIRST. Incorrectly configured parameters may cause damage.

# Z height probe. One may define this section to enable Z height
# probing hardware. When this section is enabled, PROBE and
# QUERY_PROBE extended g-code commands become available. The probe
# section also creates a virtual probe:z_virtual_endstop pin. One may
# set the stepper_z endstop_pin to this virtual pin on cartesian style

maz3max

pcb2gcode --metric --front *-F.Cu.gbr --back *-B.Cu.gbr --outline *-Edge.Cuts.gbr --drill *-PTH.drl --zwork -0.3000 --mill-feed 100 --mill-speed 15000 --voronoi --vectorial --zdrill -2.5000 --zchange 30.0000 --drill-feed 400 --drill-side auto --drill-speed 15000 --milldrill --nog81 --cutter-diameter 1.0000 --fill-outline --bridges 0.5000 --bridgesnum 5 --zbridges -0.6000 --zcut -2.5000 --zsafe 2.0000 --cut-feed 610 --cut-speed 20000 --cut-infeed 10.0000 --optimise --metricoutput --zero-start

maz3max

#
# /etc/makepkg.conf
#

#########################################################################
# SOURCE ACQUISITION
#########################################################################
#
#-- The download utilities that makepkg should use to acquire sources
#  Format: 'protocol::agent'

maz3max

Keybase proof

I hereby claim:

• I am maz3max on github.
• I am mazemax (https://keybase.io/mazemax) on keybase.
• I have a public key whose fingerprint is A6EF 4612 2FF3 66D9 F0B9 F65F AEF4 9AEC EFEC 21A6

To claim this, I am signing this object: