nullnilaki

001c14-L1>power up

001c14 ATTN: Cooling system stabilized

returning to console mode  001c14 CPU0, <CTRL_T> to escape to L1
Starting PROM Boot process


IP35 PROM SGI Version 6.201  built 08:59:10 AM Jun  2, 2004
Testing/Initializing memory ...............             DONE

nullnilaki

Sgi Tezro
# uname -a
IRIX64 KingGainer 6.5 01062343 IP35

# hinv
4 800 MHZ IP35 Processors
CPU: MIPS R16000 Processor Chip Revision: 2.2
FPU: MIPS R16010 Floating Point Chip Revision: 2.2
Main memory size: 4096 Mbytes
Instruction cache size: 32 Kbytes

nullnilaki

Sgi TEZRO
001c01-L1>power up
 
returning to console mode 001c01 CPU0, <CTRL_T> to escape to L1
Starting PROM Boot process
WARNING: xbow_base: 0x9200000000000000 link: 13 Widget present, but link not alive!
WARNING: xbow_base: 0x9200000000000000 link: 13 Widget present, but link not alive!
 
 
IP35 PROM SGI Version 6.210 built 02:33:51 PM Aug 26, 2004

nullnilaki

Sgi Fuel
IP35 PROM SGI Version 6.210  built 02:33:51 PM Aug 26, 2004
Running in DDR mode
Testing/Initializing memory ...............             DONE
Copying PROM code to memory ...............             DONE
Discovering local IO ......................             DONE
Discovering NUMAlink connectivity .........
Local hub NUMAlink is down.
*** Local network link down
DONE

nullnilaki

halted CPU 0

halt code = 5
HALT instruction executed
PC = fffffc0000430118
resetting all I/O buses
>>>boot dka0
(boot dka0.0.0.8.0 -flags A)
block 0 of dka0.0.0.8.0 is a valid boot block
reading 13 blocks from dka0.0.0.8.0

nullnilaki

>>>boot dka0
(boot dka0.0.0.8.0 -flags a)
block 0 of dka0.0.0.8.0 is a valid boot block
reading 13 blocks from dka0.0.0.8.0
bootstrap code read in
base = 2be000, image_start = 0, image_bytes = 1a00(6656)
initializing HWRPB at 2000
initializing page table at 1fff0000
initializing machine state
setting affinity to the primary CPU

nullnilaki

AlphaStation DS15 Console V7.2-2, built on Jun  9 2006 at 15:45:46
>>>boot dqa0
(boot dqa0.0.0.13.0 -flags a)
block 0 of dqa0.0.0.13.0 is a valid boot block
reading 13 blocks from dqa0.0.0.13.0
bootstrap code read in
base = 2be000, image_start = 0, image_bytes = 1a00(6656)
initializing HWRPB at 2000
initializing page table at 1fff0000
initializing machine state

nullnilaki

*mlterm-fb引数なし
------------------------------------------------------------------------
Aug  4 21:18:44[6743] DEBUG: [../xwindow/fb/x_display.c:3084] Framebuffer: len 786432 line_len 1024 xoff 0 yoff 0 depth 8b/1B w 1024 h 768
Aug  4 21:18:45[6743] *** ERROR HAPPEND *** BiDi: Could not load.
Aug  4 21:18:45[6743] DEBUG: w 26 h 20 m 0 => DEBUG: w 1024 h 768 m 0 1090721792
------------------------------------------------------------------------

*mlterm-fb --border=119
------------------------------------------------------------------------
Aug  4 21:22:15[1969] DEBUG: [../xwindow/fb/x_display.c:3084] Framebuffer: len 786432 line_len 1024 xoff 0 yoff 0 depth 8b/1B w 1024 h 768

nullnilaki

Diagnostic Start....nvram initialize
No problems in hardware
OMRON WS Monitor Ver4.02 (Wed Oct 12 17:07:11 1988) - 0x00800000 bytes of memory
=============< HELP MESSAGE >=====================================
  h[H]----> Help
  k[K]----> Set Boot-file constant
  g[G]----> Load Binary file
  m[M]----> Load S-record file
  x[X]----> Program execution
  r[R]----> Register Display or Modify

nullnilaki

>Diagnostic Start....nvram initialize.
No problems in hardware
OMRON WS Monitor Ver4.24 (Wed Dec 13 20:55:13 1989) - 0x00800000 bytes of memory
"BSD Monitor-mode"
>h
=============< HELP MESSAGE >=====================================
  h[H]----> Help
  k[K]----> Set Boot-file constant
  g[G]----> Load Binary file
  m[M]----> Load S-record file