I hereby claim:
- I am plumbum on github.
- I am plumbum (https://keybase.io/plumbum) on keybase.
- I have a public key whose fingerprint is 389C 69BF 88FD A63A A412 686C F709 AB9B 8FA9 A333
To claim this, I am signing this object:
#!/usr/bin/env bash | |
# | |
# https://github.com/vivien/i3blocks-contrib/tree/master/kbdd_layout | |
# | |
# i3 config | |
# [kbdd_layout] | |
# command=$HOME/bin/kbdd_layout | |
# interval=persist | |
# markup=pango | |
# |
radiation_sign(10, $fn=770); | |
module radiation_sign(h=2) { | |
linear_extrude(height=h) | |
radiation_sign_2d(); | |
} | |
module radiation_sign_2d() { | |
circle(20); | |
rotate([0,0,90]) radiation_sign_sector(); |
// Water tap handle | |
// Print with PLA | |
$fn = 40; | |
stem_height = 6; | |
stem_d = 7.5; | |
stem_cut = 6; | |
screw_height = stem_height+2; | |
screw_hole_d = 4; |
translate([0,0,0]) sector(30, 20, 10, 90); | |
translate([22,0,0]) sector(30, 20, 300, 30); | |
translate([0,22,0]) sector(30, 20, 30, 300); | |
translate([22,22,0]) sector(30, 20, 10, 190); | |
module sector(h, d, a1, a2) { | |
if (a2 - a1 > 180) { | |
difference() { | |
cylinder(h=h, d=d); | |
translate([0,0,-0.5]) sector(h+1, d+1, a2-360, a1); |
I hereby claim:
To claim this, I am signing this object:
#include <Wire.h> | |
#include <LiquidCrystal_I2C.h> | |
#include <Adafruit_Sensor.h> | |
#include <Adafruit_BME280.h> | |
#define SEALEVELPRESSURE_HPA (1013.25) | |
LiquidCrystal_I2C lcd(0x27,16,2); // set the LCD address to 0x27 for a 16 chars and 2 line display | |
Adafruit_BME280 bme; // I2C |
ivan@jobber:/:$ sudo hdparm -t /dev/sda # SSD | |
/dev/sda: | |
Timing buffered disk reads: 1096 MB in 3.00 seconds = 365.29 MB/sec | |
ivan@jobber:/:$ sudo hdparm -t /dev/sdb # WD Black 1TB | |
/dev/sdb: | |
Timing buffered disk reads: 394 MB in 3.00 seconds = 131.28 MB/sec | |
ivan@jobber:/:$ sudo hdparm -t /dev/sdc # WD Green 512GB |
<?php | |
define('USE_LINK', true); | |
$start_time = microtime(true); | |
$array = array(); | |
for($i =0; $i < 100000; $i++) { | |
$array[] = array( | |
'mem' => memory_get_usage(), |
#!/bin/sh | |
# Setup PCA9535 | |
i2cset -y i2c-gpio0 0x20 2 0xFF | |
i2cset -y i2c-gpio0 0x20 6 0xFF | |
i2cset -y i2c-gpio0 0x20 3 0xFF | |
i2cset -y i2c-gpio0 0x20 7 0x0F | |