| 0. Don't have a SIM card in when you're updating radio firmware or it will bomb out partway through as it changes from internal IP to IP passthrough | |
| 1. Disable external IP passthrough mode: Network Setting -> Broadband -> Cellular APN -> #1 -> Modify icon -> "IP Passthrough" slider to off | |
| 2. Use "management" Wi-Fi AP as general Wi-Fi AP (with limitations) -> Network Setting -> Bridge1 -> Modify icon -> Move the Wi-Fi AP interface to the pane on the right alongside LAN1 | |
| NOTE: by default, once you do the above, the router will happily pass traffic from devices on the Wi-Fi AP to other devices on the LAN1 subnet, but will block traffic originating from the Wi-Fi AP from exiting to the Internet via the LTE side of the device. You can clumsily hack around this by setting another device, e.g. another Wi-Fi AP or Raspberry Pi or Cray supercomputer, as the default gateway for the LAN1 subnet in your DHCP server config, and pointing *that* device at the Zyxel as *its* default GW. This adds additional hops, but enabl |
| val compileTimes = inputKey[Unit]("Get compilation time for each folder") | |
| compileTimes / aggregate := false, | |
| compileTimes := { | |
| import complete.DefaultParsers._ | |
| // val ((depth, _), filter) = (NatBasic ~ " " ~ StringBasic).parsed | |
| val (depth, filter) = spaceDelimited("depth filter").parsed match { | |
| case Seq(depth, filter) => (depth.toInt, filter) | |
| case _ => sys.error("expected depth and filter arguments, eg '2 /'") | |
| } | |
| val s = state.value |
scaling hidpi: everything is very small needed steps:
meta/win/idea issue:
alt with left win
Update as of 8.08.2021:
If you want to add your own style to Slack, here's how.
I dunno what happened. I just wanted to try something sporty/future-y, I guess. Code for this is directly below.
FINALLY no need for tricks!
bonus tip: for more darkness > https://darkreader.org/
| load("@io_bazel_rules_scala//scala:scala.bzl", "scala_library", "scala_binary") | |
| scala_library( | |
| name = "sjsir", | |
| srcs = ["Test.scala"], | |
| deps = ["@scalajs//:library"], | |
| data = ["@scalajs//:compiler"], | |
| scalacopts = ["-Xplugin:external/scalajs/lib/scalajs-compiler_2.11.11-0.6.19.jar"], | |
| #scalacopts = ["-Xplugin:$(location @scalajs//:compiler)"], ??? location doesn't seems to be working | |
| ) |
There aren't many tutorials about this, the only tutorials I've found were about passing through entire PCIe cards to VMs, or refered to old ESXI versions (below 6.5) that used a more comprehensive desktop client instead of the web app. In v6.5, the web app was introduced and the desktop client was deprecated. You used to be able to setup RDMs in the desktop client, but with the introduction of the web console, this is no longer the case. This tutorial shows you how to pass SATA HDDs to the virtual machine on VMWare ESXI 6.5. This tutorial is partially based on VMWare's own KB and the now deprecated Forza IT blog post.
There is now an option while editing your VM's settings to add a New raw disk when you click `Add ha
Copyright © 2016-2018 Fantasyland Institute of Learning. All rights reserved.
A function is a mapping from one set, called a domain, to another set, called the codomain. A function associates every element in the domain with exactly one element in the codomain. In Scala, both domain and codomain are types.
val square : Int => Int = x => x * xabout:config settings to harden the Firefox browser. Privacy and performance enhancements.
To change these settings type 'about:config' in the url bar.
Then search the setting you would like to change and modify the value. Some settings may break certain websites from functioning and
rendering normally. Some settings may also make firefox unstable.
I am not liable for any damages/loss of data.
Not all these changes are necessary and will be dependent upon your usage and hardware. Do some research on settings if you don't understand what they do. These settings are best combined with your standard privacy extensions
(HTTPS Everywhere No longer required: Enable HTTPS-Only Mode, NoScript/Request Policy, uBlock origin, agent spoofing, Privacy Badger etc), and all plugins set to "Ask To Activate".
