Understand your Mac and iPhone more deeply by tracing the evolution of Mac OS X from prelease to Swift. John Siracusa delivers the details.
You've got two main options:
A combination of my own methodology and the Web Application Hacker's Handbook Task checklist, as a Github-Flavored Markdown file
. | |
.. | |
........ | |
@ | |
* | |
*.* | |
*.*.* | |
🎠|
# Simple No-ip.com Dynamic DNS Updater | |
# | |
# By Nathan Giesbrecht (http://nathangiesbrecht.com) | |
# | |
# 1) Install binary as described in no-ip.com's source file (assuming results in /usr/local/bin) | |
# 2) Run sudo /usr/local/bin/noip2 -C to generate configuration file | |
# 3) Copy this file noip2.service to /etc/systemd/system/ | |
# 4) Execute `sudo systemctl daemon-reload` | |
# 5) Execute `sudo systemctl enable noip2` | |
# 6) Execute `sudo systemctl start noip2` |
No, seriously, don't. You're probably reading this because you've asked what VPN service to use, and this is the answer.
Note: The content in this post does not apply to using VPN for their intended purpose; that is, as a virtual private (internal) network. It only applies to using it as a glorified proxy, which is what every third-party "VPN provider" does.
Boot and interrupt the GRUB menu | |
Edit the boot configuration, changing the "linux" line by adding these two parameters to the end of the line: | |
noexec=off noexec32=off | |
Then boot by pressing Ctrl+x. | |
After booting, you can check to see if DEP/NX is turned off by running: | |
dmesg | grep NX | |
When DEP/NX is turned off you should see something similar to this output: |
brew install git bash-completion
Configure things:
git config --global user.name "Your Name"
git config --global user.email "you@example.com"
/* | |
* Mempodipper | |
* by zx2c4 | |
* | |
* Linux Local Root Exploit | |
* | |
* Rather than put my write up here, per usual, this time I've put it | |
* in a rather lengthy blog post: http://blog.zx2c4.com/749 | |
* | |
* Enjoy. |