1wErt3r

;SMBDIS.ASM - A COMPREHENSIVE SUPER MARIO BROS. DISASSEMBLY
;by doppelganger (doppelheathen@gmail.com)

;This file is provided for your own use as-is.  It will require the character rom data
;and an iNES file header to get it to work.

;There are so many people I have to thank for this, that taking all the credit for
;myself would be an unforgivable act of arrogance. Without their help this would
;probably not be possible.  So I thank all the peeps in the nesdev scene whose insight into
;the 6502 and the NES helped me learn how it works (you guys know who you are, there's no 

liquidgecka

#!/bin/bash

usage() {
  cat << EOF
Usage: $0 [OPTION]... COMMAND
Execute the given command in a way that works safely with cron. This should
typically be used inside of a cron job definition like so:
* * * * * $(which "$0") [OPTION]... COMMAND

Arguments:

gbaman

Raspberry Pi Zero OTG Mode

Simple guide for setting up OTG modes on the Raspberry Pi Zero - By Andrew Mulholland (gbaman).

The Raspberry Pi Zero (and model A and A+) support USB On The Go, given the processor is connected directly to the USB port, unlike on the B, B+ or Pi 2 B, which goes via a USB hub.
Because of this, if setup to, the Pi can act as a USB slave instead, providing virtual serial (a terminal), virtual ethernet, virtual mass storage device (pendrive) or even other virtual devices like HID, MIDI, or act as a virtual webcam!
It is important to note that, although the model A and A+ can support being a USB slave, they are missing the ID pin (is tied to ground internally) so are unable to dynamically switch between USB master/slave mode. As such, they default to USB master mode. There is no easy way to change this right now.
It is also important to note, that a USB to UART serial adapter is not needed for any of these guides, as may be documented elsewhere across the int

gbaman

Setting up Pi Zero OTG - The quick way (No USB keyboard, mouse, HDMI monitor needed)

More details - http://blog.gbaman.info/?p=791

For this method, alongside your Pi Zero, MicroUSB cable and MicroSD card, only an additional computer is required, which can be running Windows (with Bonjour, iTunes or Quicktime installed), Mac OS or Linux (with Avahi Daemon installed, for example Ubuntu has it built in).
1. Flash Raspbian Jessie full or Raspbian Jessie Lite onto the SD card.
2. Once Raspbian is flashed, open up the boot partition (in Windows Explorer, Finder etc) and add to the bottom of the config.txt file dtoverlay=dwc2 on a new line, then save the file.
3. If using a recent release of Jessie (Dec 2016 onwards), then create a new file simply called ssh in the SD card as well. By default SSH i

popey

#!/bin/bash
# Automatically setup routing and DNS for a PiZero connected over a USB-network
# Based off https://gist.github.com/lurch/ad939bbce48064cffdb215268eac9f62
# Need to have booted PI Zero with config.txt option "dtoverlay=dwc2"
# and cmdline.txt parameter "modules-load=dwc2,g_ether"
# TODO
# Force PI to have fixed MAC address like e6:45:88:d0:85:46
# For now, edit cmdline.txt in the boot partition on the pi SD card, add:-
# g_ether.dev_addr=e6:45:88:d0:85:46

jmoy

m8urnett

PACKET HDQ-7309217392

----

Code: AB-aKd&Egh281Q
282-18-2983821-28172391u721
DISTRESS.
CHECK-IN 00:00+[37209-a271927]-[381937821]
ROUTE T

gengwg

On Server

sudo apt install mosh
sudo ufw allow from 192.168.1.0/24 to any port 60000:61000 proto udp

On Client

IanColdwater

Mute these words in your settings here: https://twitter.com/settings/muted_keywords

ActivityTweet
generic_activity_highlights
generic_activity_momentsbreaking
RankedOrganicTweet
suggest_activity
suggest_activity_feed
suggest_activity_highlights
suggest_activity_tweet

AarjavP

Steps to enable shaders:

1. DL the optifine mod jar, the latest one for version 1.12.2. https://optifine.net/downloads click on mirror if you want to avoid ads (or don't to support the author)
2. Open the minecraft install folder. If you installed via twitch desktop app, you can open this by right clicking on "FTB revelations" and choosing open folder, or clicking on it and then cog wheel top right -> open folder.
3. Exit minecraft if you have it open.
4. copy / move the optifine jar into the mods folder opened in step 2.
5. go back to parent folder -> config folder -> open file called astralsorcery.cfg -> Search for weakSky-> you'll see lines like this:

    S:weakSkyRenders <
     >