TheCrazyT

# Modified code by CrazyT
#
# For orginal view notes below:
#
# Proof-of-concept code for reading data from a Wifi microscope.
# See https://www.chzsoft.de/site/hardware/reverse-engineering-a-wifi-microscope/.

# Copyright (c) 2020, Christian Zietz <czietz@gmx.net>
#
# Redistribution and use in source and binary forms, with or without

bryan-hunt

Demo Setup for Cryptoauthlib PKCS11 and Greengrass on Raspberry Pi

• Setup the Raspberry Pi for greengrass following the AWS tutorials for the Raspberry Pi. Modules 1 & 2 need to be completed before moving forward with the pkcs11 credentials.
• Perform the steps detailed in the pkcs11 readme and stop at the "testing" section as the tests will not succeed without an initialize device.

Probing the device

An uninitialized device with the defaults provided in the readme will display the following:

darconeous

Eagle-200 Local Usage via CURL

You can locally pull data from your Rainforest Eagle-200 using cURL.

Rainforest has published a local API document which explains the details of the protocol. But this particular document is about quickly getting to the point and giving you some cURL commands you can use to immediately start pulling out data.

Prerequisites

First, I'll assume that you have the following environment variables set:

BenWoodford

Late 2018 Update

I am no longer working on this as the new API is US-only as I'm in the UK, so cannot even use it or the new app. Please don't ask me questions about it as I honestly can't remember anything.

Nissan Connect EV 2018 API

This is a work in progress, just jotting down my findings from the APK decompile so far. As I can only read the decompiled Java and not MITM the app due it not working in the UK, getting the payload info may take a while. There's loads of API calls so this may not be thorough for a while.

Base URL: https://icm.infinitiusa.com/NissanLeafProd/rest

unforgiven512

User Constraints File for Digilent CoolRunner-II CPLD Starter Board

This is intended to be a complete and ready-to-use user constraints file for the [Digilent CoolRunner-II CPLD Starter Board][1] to ease the creation of projects within the Xilinx ISE software.

Hardware Interface Overview

Below is a list of the high-level I/O components featured on the board:

• LEDs - 4

vietlq

Code2Pro: How to Forward X11 to Windows 10 via PuTTY & vcxsrv

Scope

Tested on Windows 10 & Ubuntu 16.

Steps

1. Check that sshd on Ubuntu is properly configured

kennwhite

1944 Simple Sabotage Field Manual, by Strategic Services

https://www.cia.gov/news-information/featured-story-archive/2012-featured-story-archive/CleanedUOSSSimpleSabotage_sm.pdf

Title: Simple Sabotage Field Manual Author: Strategic Services Office of Strategic Services

oscarmorrison

##Date and Time

=TIMEVALUE(SUBSTITUTE("{{OccurredAt}}"," at ", " ")) + DATEVALUE(SUBSTITUTE("{{OccurredAt}}"," at ", " "))

##Date

=DATEVALUE(SUBSTITUTE("{{OccurredAt}}"," at ", " "))

##Time

2xyo

Sysctl-IP-Tunning

Kernel sysctl configuration file for Linux dedicated server systems at high-speed networks with loads of RAM and bandwidth available.

Installation

This file should be saved as /etc/sysctl.d/sysctl.local.conf and can be activated using the command: sysctl -e -p /etc/sysctl.d/*

zeha

*.d
*.pre
*.p1
*.lst
*.sym
*.obj
*.o
*.sdb
*.obj.dmp
html/