Skip to content

Instantly share code, notes, and snippets.

@lukasnellen
lukasnellen / 00-docker-shorewall.md
Last active February 5, 2024 07:57
setup shorewall for docker networking beyond the default bridge network, e.g., for docker-compose

Docker(-compose) with shorewall

The shorewall documentation explains in http://shorewall.org/Docker.html how to configure shorewall for use with docker. The problem with the configuration is that it only allows connections from the host to the main bridge docker0. Connections to other networks on dynamically created bridges, with names starting by default with br-, is blocked. Instead of the recommended contents of /etc/shorewall/interfaces, use wild-card interface names as follows:

#ZONE	INTERFACE	OPTIONS
#dock	docker0		bridge     # disabled default recommendation
dock 	docker0		physical=docker+,routeback=1
dock 	br		physical=br-+,routeback=1
@lsd
lsd / IdeaVim OS X Key Repeat.markdown
Last active May 3, 2024 07:22
Enable key-repeat for ALL applications or just for IdeaVim/specific JetBrains apps

Upgrading to Lion or Yosemite and WebStorm 9, I noticed key repeat was
turned off for the IdeaVim plugin h j k l keys.

System-wide key repeat

defaults write -g ApplePressAndHoldEnabled -bool false in a terminal will enable
key repeat for every app. This can alternatively be found in the accessibility settings in OS X' preferences.

App specific key repeat

@maliubiao
maliubiao / socks5.go
Last active June 16, 2020 07:42
Socks5RoundTripper for net/http
package socks5
import (
"bufio"
"bytes"
"encoding/binary"
"errors"
"net"
"net/http"
"strconv"
@fqrouter
fqrouter / readme.txt
Last active May 11, 2024 03:22
shadowsocks 公共代理的必要设置
good, 你已经有了一个自己的shadowsocks代理了,现在想要把这个代理公布出去给所有人分享。
但是没有两个小时,代理就没法使用了,为什么?因为你需要额外注意以下事项(以下步骤需要比较高的linux技能)
本文只关注于确保shadowsocks服务还“活着”,如果你希望让其跑得更快,请参考
https://github.com/clowwindy/shadowsocks/wiki/Optimizing-Shadowsocks
1、 shadowsocks的timeout设置
超时时间越长,连接被保持得也就越长,导致并发的tcp的连接数也就越多。对于公共代理,这个值应该调整得小一些。推荐60秒。
2、 检查操作系统的各种限制
对于openvz的vps,特别需要检查一下

测试平台:DigitalOcean VPS ubuntu14.04 x64, strongswan5.2.2

运行以下命令请使用root权限

一:安装strongswan

由于ubuntu软件仓库中strongswan版本较低,因此从官网源码编译安装

apt-get install build-essential     #编译环境
aptitude install libgmp10 libgmp3-dev libssl-dev pkg-config libpcsclite-dev libpam0g-dev     #编译所需要的软件
@fpfeng
fpfeng / v2ex_auto_login.py
Last active June 10, 2023 16:54
登录 V2EX 领取每日奖励
# -*- coding: utf-8 -*-
from bs4 import BeautifulSoup
import requests
username = '' ###账号###
password = '' ###密码###
login_url = 'http://v2ex.com/signin' ###如V2EX设置了使用 SSL,必须改 https###
index_url = 'http://v2ex.com' ###同上###
mission_url = 'http://www.v2ex.com/mission/daily' ###同上###
UA = "Mozilla/5.0 (Windows NT 5.1) AppleWebKit/537.36 (KHTML, like Gecko) \
@petedoyle
petedoyle / gist:4129668
Last active January 29, 2021 08:19
Notes: OpenWRT / Codel on TL-WDR4300

Overview

I'm tired of massive delay (500-1000 ms pings) while uploading large files. QoS helps some, but a significant portion remains due to bufferbloat (100-150ms). This leads to delay in VoIP calls and generally sluggish web browsing while uploading.

The new Codel algorithm in OpenWRT / Attitude Adjustment should help a lot. The results below show only ~5-6ms of added latency during uploads (i.e. 14ms vs 500+ms before!). Insane.

These instructions are for the TP-Link TL-WDR4300, because I got a good deal. If you have the money, buy a Netgear WNDR3800 and install CeroWRT, you'll probably see even better results.

Why the TP-Link TL-WDR4300

In short, its fully supported in OpenWRT Attitude Adjustment and works well for my needs:

  • Cheap
@endolith
endolith / readme.md
Last active May 22, 2024 07:13
How to stream a webcam to a web browser in Ubuntu

Grr this took hours to figure out. I was trying to install MJPG-streamer and running VLC command lines and all this crap but nothing worked.

First install motion:

~> sudo apt-get install motion

Then create a config file:

~> mkdir ~/.motion

~> nano ~/.motion/motion.conf