-
-
Save wildjerry/4381ea1c77e2c7504bd935d188583b78 to your computer and use it in GitHub Desktop.
FreeCAD logs
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Msg: FreeCAD 0.19, Libs: 0.19R | |
| © Juergen Riegel, Werner Mayer, Yorik van Havre and others 2001-2021 | |
| FreeCAD is free and open-source software licensed under the terms of LGPL2+ license. | |
| FreeCAD wouldn't be possible without FreeCAD community. | |
| ##### #### ### #### | |
| # # # # # # | |
| # ## #### #### # # # # # | |
| #### # # # # # # # ##### # # | |
| # # #### #### # # # # # | |
| # # # # # # # # # ## ## ## | |
| # # #### #### ### # # #### ## ## ## | |
| Log: Time = Thu Jul 7 20:38:55 2022 | |
| Log: AppDataSkipVendor = true | |
| Log: AppHomePath = /usr/lib/freecad/ | |
| Log: AppIcon = freecad | |
| Log: AppTempPath = /tmp/ | |
| Log: BinPath = /usr/lib/freecad/bin/ | |
| Log: BuildRepositoryURL = https://code.launchpad.net/~vcs-imports/freecad/trunk | |
| Log: BuildRevision = | |
| Log: BuildRevisionDate = 2021/03/17 08:48:24 | |
| Log: BuildVersionMajor = 0 | |
| Log: BuildVersionMinor = 19 | |
| Log: Console = 0 | |
| Log: CopyrightInfo = © Juergen Riegel, Werner Mayer, Yorik van Havre and others 2001-2021 | |
| FreeCAD is free and open-source software licensed under the terms of LGPL2+ license. | |
| FreeCAD wouldn't be possible without FreeCAD community. | |
| ##### #### ### #### | |
| # # # # # # | |
| # ## #### #### # # # # # | |
| #### # # # # # # # ##### # # | |
| # # #### #### # # # # # | |
| # # # # # # # # # ## ## ## | |
| # # #### #### ### # # #### ## ## ## | |
| Log: Debug = 0 | |
| Log: DocPath = /usr/lib/freecad/doc/ | |
| Log: ExeName = FreeCAD | |
| Log: ExeVendor = FreeCAD | |
| Log: ExeVersion = 0.19 | |
| Log: LoggingConsole = 1 | |
| Log: LoggingFile = 1 | |
| Log: LoggingFileName = /home/ubuntu/.FreeCAD/FreeCAD.log | |
| Log: MaintainerUrl = http://www.freecadweb.org/wiki/Main_Page | |
| Log: PATH = /home/ubuntu/anaconda3/condabin:/home/ubuntu/.local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin:/snap/bin | |
| Log: PYTHONPATH = | |
| Log: PythonSearchPath = /usr/lib/python39.zip:/usr/lib/python3.9:/usr/lib/python3.9/lib-dynload | |
| Log: RunMode = Gui | |
| Log: SplashAlignment = Bottom|Left | |
| Log: SplashInfoColor = #c8c8c8 | |
| Log: SplashScreen = freecadsplash | |
| Log: SplashTextColor = #ffffff | |
| Log: StartWorkbench = StartWorkbench | |
| Log: SystemParameter = /home/ubuntu/.FreeCAD/system.cfg | |
| Log: UserAppData = /home/ubuntu/.FreeCAD/ | |
| Log: UserHomePath = /home/ubuntu | |
| Log: UserParameter = /home/ubuntu/.FreeCAD/user.cfg | |
| Log: Verbose = | |
| Log: Create Application | |
| Log: Run App init script | |
| Log: Init: starting App::FreeCADInit.py | |
| Log: Init: Searching for modules... | |
| Log: Init: Initializing /usr/share/freecad/Mod/Raytracing... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Tux(Init.py not found)... ignore | |
| Log: Init: Initializing /usr/share/freecad/Mod/Path... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/AddonManager... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Image... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Idf... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Fem... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Material... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Spreadsheet... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/OpenSCAD... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/MeshPart... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/PartDesign... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Test... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/ReverseEngineering... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Web... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Robot... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Show(Init.py not found)... ignore | |
| Log: Init: Initializing /usr/share/freecad/Mod/Sketcher... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Points... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Arch... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Start... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Surface... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Measure... done | |
| Log: Drawing became obsolete in 0.17; consider using TechDraw instead. | |
| Log: Init: Initializing /usr/share/freecad/Mod/Drawing... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Draft... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Inspection... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Part... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Mesh... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/TechDraw... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Import... done | |
| Log: Using /usr/share/freecad/Mod as module path! | |
| Log: System path after init: | |
| Log: /usr/lib/freecad/bin | |
| Log: /usr/share/freecad/Mod/Raytracing | |
| Log: /usr/share/freecad/Mod/Tux | |
| Log: /usr/share/freecad/Mod/Path | |
| Log: /usr/share/freecad/Mod/AddonManager | |
| Log: /usr/share/freecad/Mod/Image | |
| Log: /usr/share/freecad/Mod/Idf | |
| Log: /usr/share/freecad/Mod/Fem | |
| Log: /usr/share/freecad/Mod/Material | |
| Log: /usr/share/freecad/Mod/Spreadsheet | |
| Log: /usr/share/freecad/Mod/OpenSCAD | |
| Log: /usr/share/freecad/Mod/MeshPart | |
| Log: /usr/share/freecad/Mod/PartDesign | |
| Log: /usr/share/freecad/Mod/Test | |
| Log: /usr/share/freecad/Mod/ReverseEngineering | |
| Log: /usr/share/freecad/Mod/Web | |
| Log: /usr/share/freecad/Mod/Robot | |
| Log: /usr/share/freecad/Mod/Show | |
| Log: /usr/share/freecad/Mod/Sketcher | |
| Log: /usr/share/freecad/Mod/Points | |
| Log: /usr/share/freecad/Mod/Arch | |
| Log: /usr/share/freecad/Mod/Start | |
| Log: /usr/share/freecad/Mod/Surface | |
| Log: /usr/share/freecad/Mod/Measure | |
| Log: /usr/share/freecad/Mod/Drawing | |
| Log: /usr/share/freecad/Mod/Draft | |
| Log: /usr/share/freecad/Mod/Inspection | |
| Log: /usr/share/freecad/Mod/Part | |
| Log: /usr/share/freecad/Mod/Mesh | |
| Log: /usr/share/freecad/Mod/TechDraw | |
| Log: /usr/share/freecad/Mod/Import | |
| Log: /home/ubuntu/anaconda3/condabin | |
| Log: /home/ubuntu/.local/bin | |
| Log: /usr/local/sbin | |
| Log: /usr/local/bin | |
| Log: /usr/sbin | |
| Log: /usr/bin | |
| Log: /sbin | |
| Log: /bin | |
| Log: /usr/games | |
| Log: /usr/local/games | |
| Log: /snap/bin | |
| Log: /snap/bin | |
| Log: Init: App::FreeCADInit.py done | |
| Log: Init: Creating Gui::Application and QApplication | |
| Log: Local server 'FreeCAD' started | |
| Log: OpenGL version is: 4.5 (4.5 (Compatibility Profile) Mesa 21.2.6) | |
| Log: Run Gui init script | |
| Log: Init: Running FreeCADGuiInit.py start script... | |
| Log: Init: Searching modules... | |
| Log: Init: Initializing /usr/share/freecad/Mod/Raytracing... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Tux... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Path... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/AddonManager... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Image... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Idf(InitGui.py not found)... ignore | |
| Log: Init: Initializing /usr/share/freecad/Mod/Fem... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Material... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Spreadsheet... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/OpenSCAD... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/MeshPart... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/PartDesign... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Test... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/ReverseEngineering... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Web... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Robot... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Show(InitGui.py not found)... ignore | |
| Log: Init: Initializing /usr/share/freecad/Mod/Sketcher... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Points... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Arch... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Start... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Surface... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Measure(InitGui.py not found)... ignore | |
| Log: Init: Initializing /usr/share/freecad/Mod/Drawing... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Draft... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Inspection... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Part... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Mesh... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/TechDraw... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Import... done | |
| Log: Init: Loading FreeCAD GUI | |
| Log: Init: Running FreeCADGuiInit.py start script... done | |
| Log: Init: Activating default workbench StartWorkbench | |
| Log: Loading GUI of Web module... done | |
| Log: Loading GUI of Start module... done | |
| Log: Loading Start module... done | |
| Log: Init: Showing main window | |
| Log: Main window restored | |
| Log: Show main window | |
| Log: Toolbars restored | |
| Log: Couldn't connect to spacenav daemon. Please ignore if you don't have a spacemouse. | |
| Log: Init: Entering event loop | |
| Log: Init: Processing command line files | |
| Wrn: GitPython not found. Using standard download instead. | |
| Log: Hide main window | |
| Log: Finish: Event loop left | |
| Log: Destruct Gui::Application | |
| Log: Couldn't disconnect from spacenav daemon | |
| Log: FreeCAD terminating... | |
| Log: Saving system parameter... | |
| Log: Saving system parameter...done | |
| Log: Saving user parameter... | |
| Log: Saving user parameter...done |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Msg: FreeCAD 0.19, Libs: 0.19R | |
| © Juergen Riegel, Werner Mayer, Yorik van Havre and others 2001-2021 | |
| FreeCAD is free and open-source software licensed under the terms of LGPL2+ license. | |
| FreeCAD wouldn't be possible without FreeCAD community. | |
| ##### #### ### #### | |
| # # # # # # | |
| # ## #### #### # # # # # | |
| #### # # # # # # # ##### # # | |
| # # #### #### # # # # # | |
| # # # # # # # # # ## ## ## | |
| # # #### #### ### # # #### ## ## ## | |
| Log: Time = Wed Jul 13 15:48:26 2022 | |
| Log: AppDataSkipVendor = true | |
| Log: AppHomePath = /usr/lib/freecad/ | |
| Log: AppIcon = freecad | |
| Log: AppTempPath = /tmp/ | |
| Log: BinPath = /usr/lib/freecad/bin/ | |
| Log: BuildRepositoryURL = https://code.launchpad.net/~vcs-imports/freecad/trunk | |
| Log: BuildRevision = | |
| Log: BuildRevisionDate = 2022/02/14 17:05:44 | |
| Log: BuildVersionMajor = 0 | |
| Log: BuildVersionMinor = 19 | |
| Log: Console = 0 | |
| Log: CopyrightInfo = © Juergen Riegel, Werner Mayer, Yorik van Havre and others 2001-2021 | |
| FreeCAD is free and open-source software licensed under the terms of LGPL2+ license. | |
| FreeCAD wouldn't be possible without FreeCAD community. | |
| ##### #### ### #### | |
| # # # # # # | |
| # ## #### #### # # # # # | |
| #### # # # # # # # ##### # # | |
| # # #### #### # # # # # | |
| # # # # # # # # # ## ## ## | |
| # # #### #### ### # # #### ## ## ## | |
| Log: Debug = 0 | |
| Log: DocPath = /usr/lib/freecad/doc/ | |
| Log: ExeName = FreeCAD | |
| Log: ExeVendor = FreeCAD | |
| Log: ExeVersion = 0.19 | |
| Log: LoggingConsole = 1 | |
| Log: LoggingFile = 1 | |
| Log: LoggingFileName = /home/wildjerry/.FreeCAD/FreeCAD.log | |
| Log: MaintainerUrl = http://www.freecadweb.org/wiki/Main_Page | |
| Log: PATH = /usr/lib/freecad/bin:/usr/share/freecad/Mod/TechDraw:/usr/share/freecad/Mod/OpenSCAD:/usr/share/freecad/Mod/Material:/usr/share/freecad/Mod/Start:/usr/share/freecad/Mod/Sketcher:/usr/share/freecad/Mod/ReverseEngineering:/usr/share/freecad/Mod/PartDesign:/usr/share/freecad/Mod/Raytracing:/usr/share/freecad/Mod/Inspection:/usr/share/freecad/Mod/Mesh:/usr/share/freecad/Mod/Measure:/usr/share/freecad/Mod/Web:/usr/share/freecad/Mod/Robot:/usr/share/freecad/Mod/Part:/usr/share/freecad/Mod/AddonManager:/usr/share/freecad/Mod/Idf:/usr/share/freecad/Mod/Spreadsheet:/usr/share/freecad/Mod/Image:/usr/share/freecad/Mod/Fem:/usr/share/freecad/Mod/Show:/usr/share/freecad/Mod/Points:/usr/share/freecad/Mod/Import:/usr/share/freecad/Mod/Path:/usr/share/freecad/Mod/Tux:/usr/share/freecad/Mod/MeshPart:/usr/share/freecad/Mod/Test:/usr/share/freecad/Mod/Arch:/usr/share/freecad/Mod/Draft:/usr/share/freecad/Mod/Drawing:/usr/share/freecad/Mod/Surface:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin:/snap/bin | |
| Log: PYTHONPATH = | |
| Log: PythonSearchPath = /usr/lib/python310.zip:/usr/lib/python3.10:/usr/lib/python3.10/lib-dynload | |
| Log: RunMode = Gui | |
| Log: SplashAlignment = Bottom|Left | |
| Log: SplashInfoColor = #c8c8c8 | |
| Log: SplashScreen = freecadsplash | |
| Log: SplashTextColor = #ffffff | |
| Log: StartWorkbench = StartWorkbench | |
| Log: SystemParameter = /home/wildjerry/.FreeCAD/system.cfg | |
| Log: UserAppData = /home/wildjerry/.FreeCAD/ | |
| Log: UserHomePath = /home/wildjerry | |
| Log: UserParameter = /home/wildjerry/.FreeCAD/user.cfg | |
| Log: Verbose = | |
| Log: Create Application | |
| Log: Run App init script | |
| Log: Init: starting App::FreeCADInit.py | |
| Log: Init: Searching for modules... | |
| Log: Init: Initializing /usr/share/freecad/Mod/TechDraw... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/OpenSCAD... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Material... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Start... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Sketcher... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/ReverseEngineering... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/PartDesign... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Raytracing... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Inspection... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Mesh... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Measure... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Web... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Robot... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Part... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/AddonManager... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Idf... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Spreadsheet... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Image... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Fem... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Show(Init.py not found)... ignore | |
| Log: Init: Initializing /usr/share/freecad/Mod/Points... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Import... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Path... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Tux(Init.py not found)... ignore | |
| Log: Init: Initializing /usr/share/freecad/Mod/MeshPart... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Test... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Arch... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Draft... done | |
| Log: Drawing became obsolete in 0.17; consider using TechDraw instead. | |
| Log: Init: Initializing /usr/share/freecad/Mod/Drawing... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Surface... done | |
| Log: Using /usr/share/freecad/Mod as module path! | |
| Log: System path after init: | |
| Log: /usr/lib/freecad/bin | |
| Log: /usr/share/freecad/Mod/TechDraw | |
| Log: /usr/share/freecad/Mod/OpenSCAD | |
| Log: /usr/share/freecad/Mod/Material | |
| Log: /usr/share/freecad/Mod/Start | |
| Log: /usr/share/freecad/Mod/Sketcher | |
| Log: /usr/share/freecad/Mod/ReverseEngineering | |
| Log: /usr/share/freecad/Mod/PartDesign | |
| Log: /usr/share/freecad/Mod/Raytracing | |
| Log: /usr/share/freecad/Mod/Inspection | |
| Log: /usr/share/freecad/Mod/Mesh | |
| Log: /usr/share/freecad/Mod/Measure | |
| Log: /usr/share/freecad/Mod/Web | |
| Log: /usr/share/freecad/Mod/Robot | |
| Log: /usr/share/freecad/Mod/Part | |
| Log: /usr/share/freecad/Mod/AddonManager | |
| Log: /usr/share/freecad/Mod/Idf | |
| Log: /usr/share/freecad/Mod/Spreadsheet | |
| Log: /usr/share/freecad/Mod/Image | |
| Log: /usr/share/freecad/Mod/Fem | |
| Log: /usr/share/freecad/Mod/Show | |
| Log: /usr/share/freecad/Mod/Points | |
| Log: /usr/share/freecad/Mod/Import | |
| Log: /usr/share/freecad/Mod/Path | |
| Log: /usr/share/freecad/Mod/Tux | |
| Log: /usr/share/freecad/Mod/MeshPart | |
| Log: /usr/share/freecad/Mod/Test | |
| Log: /usr/share/freecad/Mod/Arch | |
| Log: /usr/share/freecad/Mod/Draft | |
| Log: /usr/share/freecad/Mod/Drawing | |
| Log: /usr/share/freecad/Mod/Surface | |
| Log: /usr/lib/freecad/bin | |
| Log: /usr/share/freecad/Mod/TechDraw | |
| Log: /usr/share/freecad/Mod/OpenSCAD | |
| Log: /usr/share/freecad/Mod/Material | |
| Log: /usr/share/freecad/Mod/Start | |
| Log: /usr/share/freecad/Mod/Sketcher | |
| Log: /usr/share/freecad/Mod/ReverseEngineering | |
| Log: /usr/share/freecad/Mod/PartDesign | |
| Log: /usr/share/freecad/Mod/Raytracing | |
| Log: /usr/share/freecad/Mod/Inspection | |
| Log: /usr/share/freecad/Mod/Mesh | |
| Log: /usr/share/freecad/Mod/Measure | |
| Log: /usr/share/freecad/Mod/Web | |
| Log: /usr/share/freecad/Mod/Robot | |
| Log: /usr/share/freecad/Mod/Part | |
| Log: /usr/share/freecad/Mod/AddonManager | |
| Log: /usr/share/freecad/Mod/Idf | |
| Log: /usr/share/freecad/Mod/Spreadsheet | |
| Log: /usr/share/freecad/Mod/Image | |
| Log: /usr/share/freecad/Mod/Fem | |
| Log: /usr/share/freecad/Mod/Show | |
| Log: /usr/share/freecad/Mod/Points | |
| Log: /usr/share/freecad/Mod/Import | |
| Log: /usr/share/freecad/Mod/Path | |
| Log: /usr/share/freecad/Mod/Tux | |
| Log: /usr/share/freecad/Mod/MeshPart | |
| Log: /usr/share/freecad/Mod/Test | |
| Log: /usr/share/freecad/Mod/Arch | |
| Log: /usr/share/freecad/Mod/Draft | |
| Log: /usr/share/freecad/Mod/Drawing | |
| Log: /usr/share/freecad/Mod/Surface | |
| Log: /usr/local/sbin | |
| Log: /usr/local/bin | |
| Log: /usr/sbin | |
| Log: /usr/bin | |
| Log: /sbin | |
| Log: /bin | |
| Log: /usr/games | |
| Log: /usr/local/games | |
| Log: /snap/bin | |
| Log: /snap/bin | |
| Log: Init: App::FreeCADInit.py done | |
| Log: Init: Creating Gui::Application and QApplication | |
| Log: Warning: Ignoring XDG_SESSION_TYPE=wayland on Gnome. Use QT_QPA_PLATFORM=wayland to run on Wayland anyway. | |
| Log: Local server 'FreeCAD' started | |
| Log: OpenGL version is: 4.5 (4.5 (Compatibility Profile) Mesa 22.0.1) | |
| Log: Run Gui init script | |
| Log: Init: Running FreeCADGuiInit.py start script... | |
| Log: Init: Searching modules... | |
| Log: Init: Initializing /usr/share/freecad/Mod/TechDraw... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/OpenSCAD... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Material... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Start... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Sketcher... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/ReverseEngineering... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/PartDesign... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Raytracing... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Inspection... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Mesh... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Measure(InitGui.py not found)... ignore | |
| Log: Init: Initializing /usr/share/freecad/Mod/Web... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Robot... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Part... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/AddonManager... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Idf(InitGui.py not found)... ignore | |
| Log: Init: Initializing /usr/share/freecad/Mod/Spreadsheet... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Image... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Fem... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Show(InitGui.py not found)... ignore | |
| Log: Init: Initializing /usr/share/freecad/Mod/Points... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Import... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Path... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Tux... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/MeshPart... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Test... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Arch... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Draft... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Drawing... done | |
| Log: Init: Initializing /usr/share/freecad/Mod/Surface... done | |
| Log: Init: Loading FreeCAD GUI | |
| Log: Init: Running FreeCADGuiInit.py start script... done | |
| Log: Init: Activating default workbench StartWorkbench | |
| Log: Loading GUI of Web module... done | |
| Log: Loading GUI of Start module... done | |
| Log: Loading Start module... done | |
| Log: Init: Showing main window | |
| Log: Main window restored | |
| Log: Show main window | |
| Log: Toolbars restored | |
| Log: Couldn't connect to spacenav daemon. Please ignore if you don't have a spacemouse. | |
| Log: Init: Entering event loop | |
| Log: Init: Processing command line files | |
| Wrn: GitPython not found. Using standard download instead. | |
| Log: Hide main window | |
| Log: Finish: Event loop left | |
| Log: Destruct Gui::Application | |
| Log: Couldn't disconnect from spacenav daemon | |
| Log: FreeCAD terminating... | |
| Log: Saving system parameter... | |
| Log: Saving system parameter...done | |
| Log: Saving user parameter... | |
| Log: Saving user parameter...done |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Msg: FreeCAD 0.20, Libs: 2022.625R14555 (Git shallow) | |
| Log: Time = 2022-Jul-07 20:28:02 | |
| Log: AboutImage = freecadabout | |
| Log: AppDataSkipVendor = true | |
| Log: AppHomePath = /snap/freecad-realthunder/47/usr/ | |
| Log: AppIcon = freecad | |
| Log: AppTempPath = /home/ubuntu/snap/freecad-realthunder/common/temp/ | |
| Log: Application = FreeCAD Link Branch | |
| Log: BinPath = /snap/freecad-realthunder/47/usr/bin/ | |
| Log: BuildRepositoryURL = Unknown | |
| Log: BuildRevision = 14555 (Git shallow) | |
| Log: BuildRevisionBranch = (HEAD detached at 2022.06.25-edge) | |
| Log: BuildRevisionDate = 20220625 | |
| Log: BuildRevisionHash = 0191f4edf1b19bf52124a4be654074b5cc035645 | |
| Log: BuildVersionMajor = 2022 | |
| Log: BuildVersionMinor = 625 | |
| Log: Console = 0 | |
| Log: CopyrightInfo = | |
| Log: Debug = 0 | |
| Log: DocPath = /snap/freecad-realthunder/47/usr/doc/ | |
| Log: ExeName = FreeCAD | |
| Log: ExeVendor = FreeCAD | |
| Log: ExeVersion = 0.20 | |
| Log: LoggingConsole = 1 | |
| Log: LoggingFile = 1 | |
| Log: LoggingFileName = /home/ubuntu/snap/freecad-realthunder/common/.FreeCAD/FreeCAD.log | |
| Log: MaintainerUrl = https://github.com/realthunder/FreeCAD | |
| Log: PATH = /snap/freecad-realthunder/47/usr/sbin:/snap/freecad-realthunder/47/usr/bin:/snap/freecad-realthunder/47/sbin:/snap/freecad-realthunder/47/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/freecad-realthunder/47/kf5/usr/bin | |
| Log: PYTHONPATH = | |
| Log: PythonSearchPath = /snap/freecad-realthunder/47/usr/lib/python38.zip:/snap/freecad-realthunder/47/usr/lib/python3.8:/snap/freecad-realthunder/47/usr/lib/python3.8/lib-dynload | |
| Log: RunMode = Gui | |
| Log: SplashAlignment = Bottom|Left | |
| Log: SplashInfoColor = #101010 | |
| Log: SplashInfoExeName = FreeCAD Link Daily | |
| Log: SplashInfoPosition = 12 38 | |
| Log: SplashInfoVersion = 2022.06.25 | |
| Log: SplashScreen = freecad_link_splash.png | |
| Log: SplashTextColor = #000000 | |
| Log: StartWorkbench = StartWorkbench | |
| Log: SystemParameter = /home/ubuntu/snap/freecad-realthunder/common/.FreeCAD/link.system.cfg | |
| Log: UserAppData = /home/ubuntu/snap/freecad-realthunder/common/.FreeCAD/ | |
| Log: UserHomePath = /home/ubuntu/snap/freecad-realthunder/common | |
| Log: UserParameter = /home/ubuntu/snap/freecad-realthunder/common/.FreeCAD/link.user.cfg | |
| Log: VendorCFGPrefix = link. | |
| Log: Verbose = | |
| Log: WindowIcon = freecad_link.svg | |
| Log: WindowTitle = FreeCAD Link Daily | |
| Log: Create Application | |
| Log: Run App init script | |
| Log: Init: starting App::FreeCADInit.py | |
| Log: Init: Searching for modules... | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/AddonManager... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Arch... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Assembly3(Init.py not found)... ignore | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Draft... done | |
| Log: Drawing became obsolete in 0.17; consider using TechDraw instead. | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Drawing... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Fem... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Idf... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Image... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Import... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Inspection... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Material... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Measure... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Mesh... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/MeshPart... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/OpenSCAD... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Part... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/PartDesign... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Path... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Plot(Init.py not found)... ignore | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Points... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Raytracing... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/ReverseEngineering... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Robot... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Show(Init.py not found)... ignore | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Sketcher... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/SnapSetup... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Spreadsheet... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Start... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Surface... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/TechDraw... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Test... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Tux(Init.py not found)... ignore | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Web... done | |
| Log: Init: Initializing /home/ubuntu/snap/freecad-realthunder/common/.FreeCAD/Mod/3D_Printing_Tools(Init.py not found)... ignore | |
| Log: Init: Initializing /home/ubuntu/snap/freecad-realthunder/common/.FreeCAD/Mod/fcgear(Init.py not found)... ignore | |
| Log: Init: Initializing /home/ubuntu/snap/freecad-realthunder/common/.FreeCAD/Mod/fasteners... done | |
| Log: Init: Initializing /home/ubuntu/snap/freecad-realthunder/common/.FreeCAD/Mod/Rocket... done | |
| Log: Init: Initializing freecad.fc_cadquery | |
| Log: Module: Part | |
| Log: Loading Part module... done | |
| Log: Init: No init module found in freecad.fc_cadquery, skipping | |
| Log: Init: Initializing freecad.gears | |
| Log: Init: No init module found in freecad.gears, skipping | |
| Log: Init: Initializing freecad.asm3 | |
| Log: Init: No init module found in freecad.asm3, skipping | |
| Log: Using /snap/freecad-realthunder/47/usr/Mod as module path! | |
| Log: System path after init: | |
| Log: /snap/freecad-realthunder/47/usr/bin | |
| Log: /snap/freecad-realthunder/47/usr/Mod/AddonManager | |
| Log: /snap/freecad-realthunder/47/usr/Mod/Arch | |
| Log: /snap/freecad-realthunder/47/usr/Mod/Assembly3 | |
| Log: /snap/freecad-realthunder/47/usr/Mod/Draft | |
| Log: /snap/freecad-realthunder/47/usr/Mod/Drawing | |
| Log: /snap/freecad-realthunder/47/usr/Mod/Fem | |
| Log: /snap/freecad-realthunder/47/usr/Mod/Idf | |
| Log: /snap/freecad-realthunder/47/usr/Mod/Image | |
| Log: /snap/freecad-realthunder/47/usr/Mod/Import | |
| Log: /snap/freecad-realthunder/47/usr/Mod/Inspection | |
| Log: /snap/freecad-realthunder/47/usr/Mod/Material | |
| Log: /snap/freecad-realthunder/47/usr/Mod/Measure | |
| Log: /snap/freecad-realthunder/47/usr/Mod/Mesh | |
| Log: /snap/freecad-realthunder/47/usr/Mod/MeshPart | |
| Log: /snap/freecad-realthunder/47/usr/Mod/OpenSCAD | |
| Log: /snap/freecad-realthunder/47/usr/Mod/Part | |
| Log: /snap/freecad-realthunder/47/usr/Mod/PartDesign | |
| Log: /snap/freecad-realthunder/47/usr/Mod/Path | |
| Log: /snap/freecad-realthunder/47/usr/Mod/Plot | |
| Log: /snap/freecad-realthunder/47/usr/Mod/Points | |
| Log: /snap/freecad-realthunder/47/usr/Mod/Raytracing | |
| Log: /snap/freecad-realthunder/47/usr/Mod/ReverseEngineering | |
| Log: /snap/freecad-realthunder/47/usr/Mod/Robot | |
| Log: /snap/freecad-realthunder/47/usr/Mod/Show | |
| Log: /snap/freecad-realthunder/47/usr/Mod/Sketcher | |
| Log: /snap/freecad-realthunder/47/usr/Mod/SnapSetup | |
| Log: /snap/freecad-realthunder/47/usr/Mod/Spreadsheet | |
| Log: /snap/freecad-realthunder/47/usr/Mod/Start | |
| Log: /snap/freecad-realthunder/47/usr/Mod/Surface | |
| Log: /snap/freecad-realthunder/47/usr/Mod/TechDraw | |
| Log: /snap/freecad-realthunder/47/usr/Mod/Test | |
| Log: /snap/freecad-realthunder/47/usr/Mod/Tux | |
| Log: /snap/freecad-realthunder/47/usr/Mod/Web | |
| Log: /home/ubuntu/snap/freecad-realthunder/common/.FreeCAD/Mod/3D_Printing_Tools | |
| Log: /home/ubuntu/snap/freecad-realthunder/common/.FreeCAD/Mod/fcgear | |
| Log: /home/ubuntu/snap/freecad-realthunder/common/.FreeCAD/Mod/fasteners | |
| Log: /home/ubuntu/snap/freecad-realthunder/common/.FreeCAD/Mod/Rocket | |
| Log: /snap/freecad-realthunder/47/usr/sbin | |
| Log: /snap/freecad-realthunder/47/usr/bin | |
| Log: /snap/freecad-realthunder/47/sbin | |
| Log: /snap/freecad-realthunder/47/bin | |
| Log: /usr/local/sbin | |
| Log: /usr/local/bin | |
| Log: /usr/sbin | |
| Log: /usr/bin | |
| Log: /sbin | |
| Log: /bin | |
| Log: /usr/games | |
| Log: /usr/local/games | |
| Log: /snap/freecad-realthunder/47/kf5/usr/bin | |
| Log: Init: App::FreeCADInit.py done | |
| Log: Init: Creating Gui::Application and QApplication | |
| Log: Qt: Session management error: Could not open network socket | |
| Log: Local server 'FreeCAD' started | |
| Log: OpenGL version is: 4.5 (4.5 (Compatibility Profile) Mesa 21.2.6) | |
| Log: Run Gui init script | |
| Log: Init: Running FreeCADGuiInit.py start script... | |
| Log: Init: Searching modules... | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/AddonManager... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Arch... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Assembly3(InitGui.py not found)... ignore | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Draft... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Drawing... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Fem... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Idf(InitGui.py not found)... ignore | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Image... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Import... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Inspection... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Material... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Measure(InitGui.py not found)... ignore | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Mesh... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/MeshPart... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/OpenSCAD... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Part... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/PartDesign... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Path... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Plot(InitGui.py not found)... ignore | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Points... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Raytracing... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/ReverseEngineering... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Robot... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Show(InitGui.py not found)... ignore | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Sketcher... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/SnapSetup(InitGui.py not found)... ignore | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Spreadsheet... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Start... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Surface... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/TechDraw... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Test... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Tux... done | |
| Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Web... done | |
| Log: Init: Initializing /home/ubuntu/snap/freecad-realthunder/common/.FreeCAD/Mod/3D_Printing_Tools... done | |
| Log: Init: Initializing /home/ubuntu/snap/freecad-realthunder/common/.FreeCAD/Mod/fcgear(InitGui.py not found)... ignore | |
| Log: Init: Initializing /home/ubuntu/snap/freecad-realthunder/common/.FreeCAD/Mod/fasteners... done | |
| Log: Init: Initializing /home/ubuntu/snap/freecad-realthunder/common/.FreeCAD/Mod/Rocket... done | |
| Log: Init: Initializing freecad.fc_cadquery | |
| Log: Init: No init_gui module found in freecad.fc_cadquery, skipping | |
| Log: Init: Initializing freecad.gears | |
| Log: Init: Initializing freecad.gears... done | |
| Log: Init: Initializing freecad.asm3 | |
| Log: Init: Initializing freecad.asm3... done | |
| Log: Init: Loading FreeCAD GUI | |
| Log: Init: Running FreeCADGuiInit.py start script... done | |
| Log: Init: Activating default workbench StartWorkbench | |
| Log: Loading GUI of Web module... done | |
| Log: Loading GUI of Start module... done | |
| Log: Loading Start module... done | |
| Log: Init: Showing main window | |
| Log: Main window restored | |
| Log: Show main window | |
| Log: Toolbars restored | |
| Log: Init: Entering event loop | |
| Log: Couldn't connect to spacenav daemon. Please ignore if you don't have a spacemouse. | |
| Log: Init: Entering event loop | |
| Log: Init: Processing command line files | |
| Log: Hide main window | |
| Log: Finish: Event loop left | |
| Log: Destruct Gui::Application | |
| Log: Couldn't disconnect from spacenav daemon | |
| Log: FreeCAD terminating... | |
| Log: Saving system parameter... | |
| Log: Saving system parameter...done | |
| Log: Saving user parameter... | |
| Log: Saving user parameter...done |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Msg: FreeCAD 0.20, Libs: 2022.712R14555 (Git shallow) | |
| Log: Time = 2022-Jul-13 15:56:18 | |
| Log: AboutImage = freecad_link_splash.png | |
| Log: AppDataSkipVendor = true | |
| Log: AppHomePath = /snap/freecad-realthunder/56/usr/ | |
| Log: AppIcon = freecad | |
| Log: AppTempPath = /home/wildjerry/snap/freecad-realthunder/common/temp/ | |
| Log: Application = FreeCAD Link Branch | |
| Log: BinPath = /snap/freecad-realthunder/56/usr/bin/ | |
| Log: BuildRepositoryURL = Unknown | |
| Log: BuildRevision = 14555 (Git shallow) | |
| Log: BuildRevisionBranch = (HEAD detached at 2022.07.12-edge) | |
| Log: BuildRevisionDate = 20220712 | |
| Log: BuildRevisionHash = 8ce366738c70dde14b276f68f6e2f6a380eac004 | |
| Log: BuildVersionMajor = 2022 | |
| Log: BuildVersionMinor = 712 | |
| Log: Console = 0 | |
| Log: CopyrightInfo = | |
| Log: Debug = 0 | |
| Log: DocPath = /snap/freecad-realthunder/56/usr/doc/ | |
| Log: ExeName = FreeCAD | |
| Log: ExeVendor = FreeCAD | |
| Log: ExeVersion = 0.20 | |
| Log: LoggingConsole = 1 | |
| Log: LoggingFile = 1 | |
| Log: LoggingFileName = /home/wildjerry/snap/freecad-realthunder/common/.FreeCAD/FreeCAD.log | |
| Log: MaintainerUrl = https://github.com/realthunder/FreeCAD | |
| Log: PATH = /snap/freecad-realthunder/56/usr/sbin:/snap/freecad-realthunder/56/usr/bin:/snap/freecad-realthunder/56/sbin:/snap/freecad-realthunder/56/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/freecad-realthunder/56/kf5/usr/bin | |
| Log: PYTHONPATH = | |
| Log: PythonSearchPath = /snap/freecad-realthunder/56/usr/lib/python38.zip:/snap/freecad-realthunder/56/usr/lib/python3.8:/snap/freecad-realthunder/56/usr/lib/python3.8/lib-dynload | |
| Log: RunMode = Gui | |
| Log: SplashAlignment = Bottom|Left | |
| Log: SplashGif = freecad_link_logo.gif | |
| Log: SplashInfoColor = #101010 | |
| Log: SplashInfoExeName = FreeCAD Link Daily | |
| Log: SplashInfoPosition = 12 38 | |
| Log: SplashInfoVersion = 2022.07.12 | |
| Log: SplashScreen = freecad_link_splash.png | |
| Log: SplashTextColor = #000000 | |
| Log: StartWorkbench = StartWorkbench | |
| Log: SystemParameter = /home/wildjerry/snap/freecad-realthunder/common/.FreeCAD/link.system.cfg | |
| Log: UserAppData = /home/wildjerry/snap/freecad-realthunder/common/.FreeCAD/ | |
| Log: UserHomePath = /home/wildjerry/snap/freecad-realthunder/common | |
| Log: UserParameter = /home/wildjerry/snap/freecad-realthunder/common/.FreeCAD/link.user.cfg | |
| Log: VendorCFGPrefix = link. | |
| Log: Verbose = | |
| Log: WindowIcon = freecad_link.svg | |
| Log: WindowTitle = FreeCAD Link Daily | |
| Log: Create Application | |
| Log: Run App init script | |
| Log: Init: starting App::FreeCADInit.py | |
| Log: Init: Searching for modules... | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/AddonManager... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Arch... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Assembly3(Init.py not found)... ignore | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Draft... done | |
| Log: Drawing became obsolete in 0.17; consider using TechDraw instead. | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Drawing... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Fem... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Idf... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Image... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Import... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Inspection... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Material... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Measure... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Mesh... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/MeshPart... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/OpenSCAD... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Part... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/PartDesign... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Path... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Plot(Init.py not found)... ignore | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Points... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Raytracing... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/ReverseEngineering... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Robot... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Show(Init.py not found)... ignore | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Sketcher... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/SnapSetup... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Spreadsheet... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Start... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Surface... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/TechDraw... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Test... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Tux(Init.py not found)... ignore | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Web... done | |
| Log: Init: Initializing freecad.fc_cadquery | |
| Log: Module: Part | |
| Log: Loading Part module... done | |
| Log: Init: No init module found in freecad.fc_cadquery, skipping | |
| Log: Init: Initializing freecad.asm3 | |
| Log: Init: No init module found in freecad.asm3, skipping | |
| Log: Using /snap/freecad-realthunder/56/usr/Mod as module path! | |
| Log: System path after init: | |
| Log: /snap/freecad-realthunder/56/usr/bin | |
| Log: /snap/freecad-realthunder/56/usr/Mod/AddonManager | |
| Log: /snap/freecad-realthunder/56/usr/Mod/Arch | |
| Log: /snap/freecad-realthunder/56/usr/Mod/Assembly3 | |
| Log: /snap/freecad-realthunder/56/usr/Mod/Draft | |
| Log: /snap/freecad-realthunder/56/usr/Mod/Drawing | |
| Log: /snap/freecad-realthunder/56/usr/Mod/Fem | |
| Log: /snap/freecad-realthunder/56/usr/Mod/Idf | |
| Log: /snap/freecad-realthunder/56/usr/Mod/Image | |
| Log: /snap/freecad-realthunder/56/usr/Mod/Import | |
| Log: /snap/freecad-realthunder/56/usr/Mod/Inspection | |
| Log: /snap/freecad-realthunder/56/usr/Mod/Material | |
| Log: /snap/freecad-realthunder/56/usr/Mod/Measure | |
| Log: /snap/freecad-realthunder/56/usr/Mod/Mesh | |
| Log: /snap/freecad-realthunder/56/usr/Mod/MeshPart | |
| Log: /snap/freecad-realthunder/56/usr/Mod/OpenSCAD | |
| Log: /snap/freecad-realthunder/56/usr/Mod/Part | |
| Log: /snap/freecad-realthunder/56/usr/Mod/PartDesign | |
| Log: /snap/freecad-realthunder/56/usr/Mod/Path | |
| Log: /snap/freecad-realthunder/56/usr/Mod/Plot | |
| Log: /snap/freecad-realthunder/56/usr/Mod/Points | |
| Log: /snap/freecad-realthunder/56/usr/Mod/Raytracing | |
| Log: /snap/freecad-realthunder/56/usr/Mod/ReverseEngineering | |
| Log: /snap/freecad-realthunder/56/usr/Mod/Robot | |
| Log: /snap/freecad-realthunder/56/usr/Mod/Show | |
| Log: /snap/freecad-realthunder/56/usr/Mod/Sketcher | |
| Log: /snap/freecad-realthunder/56/usr/Mod/SnapSetup | |
| Log: /snap/freecad-realthunder/56/usr/Mod/Spreadsheet | |
| Log: /snap/freecad-realthunder/56/usr/Mod/Start | |
| Log: /snap/freecad-realthunder/56/usr/Mod/Surface | |
| Log: /snap/freecad-realthunder/56/usr/Mod/TechDraw | |
| Log: /snap/freecad-realthunder/56/usr/Mod/Test | |
| Log: /snap/freecad-realthunder/56/usr/Mod/Tux | |
| Log: /snap/freecad-realthunder/56/usr/Mod/Web | |
| Log: /snap/freecad-realthunder/56/usr/sbin | |
| Log: /snap/freecad-realthunder/56/usr/bin | |
| Log: /snap/freecad-realthunder/56/sbin | |
| Log: /snap/freecad-realthunder/56/bin | |
| Log: /usr/local/sbin | |
| Log: /usr/local/bin | |
| Log: /usr/sbin | |
| Log: /usr/bin | |
| Log: /sbin | |
| Log: /bin | |
| Log: /usr/games | |
| Log: /usr/local/games | |
| Log: /snap/freecad-realthunder/56/kf5/usr/bin | |
| Log: Init: App::FreeCADInit.py done | |
| Log: Init: Creating Gui::Application and QApplication | |
| Log: Warning: Ignoring XDG_SESSION_TYPE=wayland on Gnome. Use QT_QPA_PLATFORM=wayland to run on Wayland anyway. | |
| Log: Qt: Session management error: Could not open network socket | |
| Log: Local server 'FreeCAD' started | |
| Log: OpenGL version is: 4.5 (4.5 (Compatibility Profile) Mesa 21.2.6) | |
| Log: Run Gui init script | |
| Log: Init: Running FreeCADGuiInit.py start script... | |
| Log: Init: Searching modules... | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/AddonManager... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Arch... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Assembly3(InitGui.py not found)... ignore | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Draft... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Drawing... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Fem... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Idf(InitGui.py not found)... ignore | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Image... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Import... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Inspection... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Material... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Measure(InitGui.py not found)... ignore | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Mesh... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/MeshPart... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/OpenSCAD... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Part... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/PartDesign... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Path... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Plot(InitGui.py not found)... ignore | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Points... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Raytracing... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/ReverseEngineering... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Robot... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Show(InitGui.py not found)... ignore | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Sketcher... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/SnapSetup(InitGui.py not found)... ignore | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Spreadsheet... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Start... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Surface... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/TechDraw... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Test... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Tux... done | |
| Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Web... done | |
| Log: Init: Initializing freecad.fc_cadquery | |
| Log: Init: No init_gui module found in freecad.fc_cadquery, skipping | |
| Log: Init: Initializing freecad.asm3 | |
| Wrn: 9.641247 <asm3.main> init_gui.py(14): no solver backend found | |
| Log: Init: Initializing freecad.asm3... done | |
| Log: Init: Loading FreeCAD GUI | |
| Log: Init: Running FreeCADGuiInit.py start script... done | |
| Log: Init: Activating default workbench StartWorkbench | |
| Log: Loading GUI of Web module... done | |
| Log: Loading GUI of Start module... done | |
| Log: Loading Start module... done | |
| Log: Init: Showing main window | |
| Log: Main window restored | |
| Log: Show main window | |
| Log: Toolbars restored | |
| Log: Init: Entering event loop | |
| Log: Couldn't connect to spacenav daemon. Please ignore if you don't have a spacemouse. | |
| Log: Init: Entering event loop | |
| Log: Init: Processing command line files | |
| Log: "Empty widget item in QVBoxLayout 'verticalLayout'." | |
| Log: Hide main window | |
| Log: Finish: Event loop left | |
| Log: Destruct Gui::Application | |
| Log: Couldn't disconnect from spacenav daemon | |
| Log: FreeCAD terminating... | |
| Log: Saving system parameter... | |
| Log: Saving system parameter...done | |
| Log: Saving user parameter... | |
| Log: Saving user parameter...done |
Since my previous post I have reinstalled ubuntu for unrelated reasons(Ubuntu 21.10 is close to EOL, and for reasons I won't go into, I was unable to go through the update process). I am now on Ubuntu 22.04.
I still have the same issue, and I have uploaded an additional 2 logs, both on fresh installs of Freecad. Neither seems to have any logs relating to addon manager, but it would be impossible for the session not to have been one where I opened addon manager and attempted to install Import Nurbs, because all three sessions since installing Freecad I have attempted to install the plugin.
ETA: You can also set the logging level in the FreeCAD Preferences -- for now I suggest turning them all on.
I did so previously at the suggestion of @KeithSloan, and he was similarly surprised by the lack of relevant information in logs. This was in KeithSloan/ImportNURBS#10.
@chennes Can you please advise me on what to do from here?
Well, we need to get logging working properly -- without it, it's impossible to tell what is going on. None of the logs above look like the log level is set -- can you verify that Edit->Preferences->General->Output window has the top four boxes checked? When you start up the Addon Manager with the Report View showing, you should see the GitHub message of the day displayed.
Oh, sorry, I was under the impression these were logs from FreeCAD 0.20, but that doesn't appear to be the case. I am not going to be much help, I simply rewrote the bulk of the Addon Manager for 0.20, so I'm not sure what's wrong in 0.19.
Oh, sorry, I was under the impression these were logs from FreeCAD 0.20, but that doesn't appear to be the case. I am not going to be much help, I simply rewrote the bulk of the Addon Manager for 0.20, so I'm not sure what's wrong in 0.19.
The realthunder logs are from realthunder's fork of FreeCAD 0.20. If you'd like me to try the mainline version of FreeCAD 0.20 , I can.
Well, we need to get logging working properly -- without it, it's impossible to tell what is going on. None of the logs above look like the log level is set -- can you verify that Edit->Preferences->General->Output window has the top four boxes checked? When you start up the Addon Manager with the Report View showing, you should see the GitHub message of the day displayed.
This had no effect.
I only point it out because that's the reason @KeithSloan pinged me on this: I rewrote a large part of the Addon Manager in 0.20. If you aren't using the version of the AM I worked on, I'm of no use to you 😃
How would I determine which version of Adding Manager I have?
…On Sun, Jul 17, 2022, 3:37 PM Chris Hennes ***@***.***> wrote:
***@***.**** commented on this gist.
------------------------------
I only point it out because that's the reason @KeithSloan
<https://github.com/KeithSloan> pinged me on this: I rewrote a large part
of the Addon Manager in 0.20. If you aren't using the version of the AM I
worked on, I'm of no use to you 😃
—
Reply to this email directly, view it on GitHub
<https://gist.github.com/4381ea1c77e2c7504bd935d188583b78#gistcomment-4234979>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AREONRPDDH6XDBQI2O3REBTVURVKHANCNFSM53DSKF7A>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
In your AM, do you see a "Settings" button in the upper right corner?
No, I see a "Configure" button.
Also, the second set of logs (realthunderLog and realthunderLog2) are both from realthunder's fork of FreeCAD 0.20.
If you see a "Configure" button (sorry, I misremembered the old text) you are using an old version of the AM: so we're back to "I'm no use to you" 😄 .
Well, I apreciate you trying to help, even if I turned out to be running
the wrong version.
What command line options would I use for this? The above logs were created
with `--write-log`
…On Mon, Jul 11, 2022, 12:58 PM Chris Hennes ***@***.***> wrote:
***@***.**** commented on this gist.
------------------------------
I do mean the FreeCAD general logging when installing an Addon, but I
actually don't see any output from the Addon Manager in the logs you posted
above. Can you try again? With all log levels enabled the Addon Manager is
quite noisy, we shouldn't be able to miss it :).
—
Reply to this email directly, view it on GitHub
<https://gist.github.com/4381ea1c77e2c7504bd935d188583b78#gistcomment-4228206>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AREONRKYDFHAP3POUC6644DVTROCRANCNFSM53DSKF7A>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Yes, that's right. But those logs above show nothing at all from the Addon Manager, not even its startup sequence. So maybe just try again? Those logs look like a simple open and close of FreeCAD.
ETA: You can also set the logging level in the FreeCAD Preferences -- for now I suggest turning them all on.