This gist is part of a blog post. Check it out at:
http://jasonrudolph.com/blog/2011/08/09/programming-achievements-how-to-level-up-as-a-developer
This gist is part of a blog post. Check it out at:
http://jasonrudolph.com/blog/2011/08/09/programming-achievements-how-to-level-up-as-a-developer
#!/usr/bin/env bash | |
rep() { | |
i=$1 | |
data=$2 | |
## run the replicate .... | |
} | |
# make the files | |
START=$(mktemp -t start-XXXX) ## signals the workers are starting |
UPDATE (March 2020, thanks @ic): I don't know the exact AMI version but yum install docker
now works on the latest Amazon Linux 2. The instructions below may still be relevant depending on the vintage AMI you are using.
Amazon changed the install in Linux 2. One no-longer using 'yum' See: https://aws.amazon.com/amazon-linux-2/release-notes/
sudo amazon-linux-extras install docker
sudo service docker start
#!/usr/bin/env bash | |
function get_headphones_index() { | |
echo $(pacmd list-cards | grep bluez_card -B1 | grep index | awk '{print $2}') | |
} | |
function get_headphones_mac_address() { | |
local temp=$(pacmd list-cards | grep bluez_card -C20 | grep 'device.string' | cut -d' ' -f 3) | |
temp="${temp%\"}" | |
temp="${temp#\"}" |
To update the BIOS/UEFI firmware requires HP-specific files in the EFI System Partition, also referred to as ESP.
On a Linux system, the ESP is typically mounted on /boot/efi
or /efi
. Whithin you should also find a EFI
directory, e.g. /boot/efi/EFI
or /efi/EFI
. This article assumes that the ESP is mounted on /efi
and that the /efi/EFI
directory exists. You can replace that with the mount point your system uses.
The HP-specific files are located in /efi/EFI/HP
or /efi/EFI/Hewlet-Packard
. These files typically come preinstalled in HP Windows PCs. If you have these files you could skip Install HP-specific files.
#!/usr/bin/env bash | |
set -e | |
cd ~ | |
sudo -v | |
# Make sure system is in a good, updated, clean, state. | |
sudo apt-get -y update |