tivnet

check host redis.host with address 127.0.0.1
      if failed port 6379 protocol redis then alert

check process redis-server with pidfile "/var/run/redis/redis-server.pid"
    start program = "/etc/init.d/redis-server start"
    stop program = "/etc/init.d/redis-server stop"
    if failed host 127.0.0.1 port 6379 then restart
    if 5 restarts within 5 cycles then timeout

joewagner

# clean everything up
echo "killing mongod and mongos"
killall mongod
killall mongos
echo "removing data files"
rm -rf data/config
rm -rf data/shard*

# For mac make sure rlimits are high enough to open all necessary connections
ulimit -n 2048

guifromrio

How to: Allow Node to bind to port 80 without sudo

TL;DR

Only do this if you understand the consequences: all node programs will be able to bind on ports < 1024

sudo setcap 'cap_net_bind_service=+ep' /usr/local/bin/node

Important: your node location may vary. Use which node to find it, or use it directly in the command:

cyx

check process redis-server
    with pidfile "/var/run/redis.pid"
    start program = "/etc/init.d/redis-server start"
    stop program = "/etc/init.d/redis-server stop"
    if 2 restarts within 3 cycles then timeout
    if totalmem > 100 Mb then alert
    if children > 255 for 5 cycles then stop
    if cpu usage > 95% for 3 cycles then restart
    if failed host 127.0.0.1 port 6379 then restart
    if 5 restarts within 5 cycles then timeout

twyatt

-optimizationpasses 5
-dontusemixedcaseclassnames
-dontskipnonpubliclibraryclasses
-dontpreverify
-verbose
-optimizations !code/simplification/arithmetic,!field/*,!class/merging/*

-renamesourcefileattribute SourceFile
-keepattributes SourceFile,LineNumberTable

levymoreira

; Levy Moreira - 12/04/2012 

#define MyAppName "Program"
#define MyAppVersion "1.0"
#define MyAppPublisher "NextTi"
#define MyAppURL "http://www.nextti.com/"
#define MyAppExeName "Program.jar"

[Setup]
; NOTE: The value of AppId uniquely identifies this application.