Unless otherwise noted (either in this file or in a file's copyright section) the contents of this gist are Copyright ©️2020 by Christopher Allen, and are shared under spdx:Creative Commons Attribution Share Alike 4.0 International (CC-BY-SA-4.) open-source license.
If you more tips and advice like these, you can become a monthly patron on my GitHub Sponsor Page for as little as $5 a month; and your contributions will be multipled, as GitHub is matching the first $5,000! This gist is all about Homebrew, so if you like it you can support it by donating to them or becoming one of their Github Sponsors.
Ventura docs for M2 Macs in this comment: https://gist.github.com/henrik242/65d26a7deca30bdb9828e183809690bd?permalink_comment_id=4555340#gistcomment-4555340
Old Monterey docs in this old revision: https://gist.github.com/henrik242/65d26a7deca30bdb9828e183809690bd/32c410e3a1de73539c76fa13ea5486569c4e0c5d
Solution for Sonoma: https://gist.github.com/sghiassy/a3927405cf4ffe81242f4ecb01c382ac
As configured in my dotfiles.
start new:
tmux
start new with session name:
This is a quick-and-dirty guide to setting up a Raspberry Pi as a "router on a stick" to PrivateInternetAccess VPN.
Install Raspbian Jessie (2016-05-27-raspbian-jessie.img
) to your Pi's sdcard.
Use the Raspberry Pi Configuration tool or sudo raspi-config
to:
# Install ARCH Linux with encrypted file-system and UEFI | |
# The official installation guide (https://wiki.archlinux.org/index.php/Installation_Guide) contains a more verbose description. | |
# Download the archiso image from https://www.archlinux.org/ | |
# Copy to a usb-drive | |
dd if=archlinux.img of=/dev/sdX bs=16M && sync # on linux | |
# Boot from the usb. If the usb fails to boot, make sure that secure boot is disabled in the BIOS configuration. | |
# Set swedish keymap |
Install the dependencies for the archiso
package:
(root): pacman -S make squashfs-tools libisoburn dosfstools patch lynx devtools git
I recommend archiso
getting them from git, there is a package in the repositories, however, at this time of writing, it will not work with the instructions below.
So, grab the most recent version from git and install it:
(user): git clone git://projects.archlinux.org/archiso.git && cd archiso
FROM ruby:2.3.1 | |
# Install dependencies | |
RUN apt-get update -qq && apt-get install -y build-essential libpq-dev nodejs | |
# Set an environment variable where the Rails app is installed to inside of Docker image: | |
ENV RAILS_ROOT /var/www/app_name | |
RUN mkdir -p $RAILS_ROOT | |
# Set working directory, where the commands will be ran: |