ChristopherA

Brew Bundle Brewfile Tips

Copyright & License

Unless otherwise noted (either in this file or in a file's copyright section) the contents of this gist are Copyright ©️2020 by Christopher Allen, and are shared under spdx:Creative Commons Attribution Share Alike 4.0 International (CC-BY-SA-4.) open-source license.

Sponsor

If you more tips and advice like these, you can become a monthly patron on my GitHub Sponsor Page for as little as $5 a month; and your contributions will be multipled, as GitHub is matching the first $5,000! This gist is all about Homebrew, so if you like it you can support it by donating to them or becoming one of their Github Sponsors.

henrik242

Disable Device Enrollment Program (DEP) notification on macOS Ventura.md

Ventura docs for M2 Macs in this comment: https://gist.github.com/henrik242/65d26a7deca30bdb9828e183809690bd?permalink_comment_id=4555340#gistcomment-4555340

Old Monterey docs in this old revision: https://gist.github.com/henrik242/65d26a7deca30bdb9828e183809690bd/32c410e3a1de73539c76fa13ea5486569c4e0c5d

Solution for Sonoma: https://gist.github.com/sghiassy/a3927405cf4ffe81242f4ecb01c382ac

satendra02

FROM ruby:2.3.1

# Install dependencies
RUN apt-get update -qq && apt-get install -y build-essential libpq-dev nodejs

# Set an environment variable where the Rails app is installed to inside of Docker image:
ENV RAILS_ROOT /var/www/app_name
RUN mkdir -p $RAILS_ROOT

# Set working directory, where the commands will be ran:

simonw

How to recover lost Python source code if it's still resident in-memory

I screwed up using git ("git checkout --" on the wrong file) and managed to delete the code I had just written... but it was still running in a process in a docker container. Here's how I got it back, using https://pypi.python.org/pypi/pyrasite/ and https://pypi.python.org/pypi/uncompyle6

Attach a shell to the docker container

Install GDB (needed by pyrasite)

apt-get update && apt-get install gdb

HardenedArray

# OBJECTIVE:  Install Arch Linux with encrypted root and swap filesystems and boot from UEFI.  

# Note this encrypted installation method, while perfectly correct and highly secure, CANNOT support encrypted /boot and 
# also CANNOT be subsequently converted to support an encrypted /boot!!!  A CLEAN INSTALL will be required!

# Therefore, if you want to have an encrypted /boot or will want an encrypted /boot system at some point in the future,
# please ONLY follow my encrypted /boot installation guide, which lives here:

pandafulmanda

Python3 Virtualenv Setup

Requirements

• Python 3
• Pip 3

$ brew install python3

m-ou-se

# Download latest archlinux bootstrap package, see https://www.archlinux.org/download/
wget 'ftp://ftp.nluug.nl/pub/os/Linux/distr/archlinux/iso/latest/archlinux-bootstrap-*-x86_64.tar.gz'

# Make sure you'll have enough entropy for pacman-key later.
apt-get install haveged

# Install the arch bootstrap image in a tmpfs.
mount -t tmpfs none /mnt
cd /mnt
tar xvf ~/archlinux-bootstrap-*-x86_64.tar.gz --strip-components=1

superjamie

Raspberry Pi VPN Router

This is a quick-and-dirty guide to setting up a Raspberry Pi as a "router on a stick" to PrivateInternetAccess VPN.

Requirements

Install Raspbian Jessie (2016-05-27-raspbian-jessie.img) to your Pi's sdcard.

Use the Raspberry Pi Configuration tool or sudo raspi-config to:

beigna

DEVICE=eth0.2
INPUT_SPEED=9600kbit
OUTPUT_SPEED=960kbit

interface $DEVICE world-in input rate $INPUT_SPEED #balanced
    class interactive commit 20%
        match udp sport 53
        match tcp port 22
        match icmp
        match tcp sports 5222,5228

satreix

Custom Arch Linux live USB

Setup

Install the dependencies for the archiso package:

(root): pacman -S make squashfs-tools libisoburn dosfstools patch lynx devtools git

I recommend archiso getting them from git, there is a package in the repositories, however, at this time of writing, it will not work with the instructions below. So, grab the most recent version from git and install it:

(user): git clone git://projects.archlinux.org/archiso.git && cd archiso