azsde

Enable & Using vGPU Passthrough

This gist is almost entirely not unlike Derek Seaman's awesome blog:

Proxmox VE 8: Windows 11 vGPU (VT-d) Passthrough with Intel Alder Lake

As such please refer to that for pictures, here i will capture the command lines I used as i sequence the commands a little differently so it makes more logic to me.

This gists assumes you are not running ZFS and are not passing any other PCIE devices (as both of these can require addtional steps - see Derek's blog for more info)

Note:i made no changes to the BIOS defaults on the Intel Nuc 13th Gen. This just worked as-is.

azsde

Preface

I owe my very rapid learning journey in the world of ConfigFs to several key sources which aren't necessarily relevant to this result, but I feel deserve a mention anyway.

• This really demystified configfs for me, and stopped me being afraid of it: http://events.linuxfoundation.org/sites/events/files/slides/USB%20Gadget%20Configfs%20API_0.pdf
• I borrowed heavily from this Mindstorms EV3 script: https://github.com/ev3dev/ev3-systemd/blob/ev3dev-jessie/scripts/ev3-usb.sh
• Desperately trawled this thread for answers: https://answers.microsoft.com/en-us/windows/forum/windows_10-networking-winpc/windows-10-vs-remote-ndis-ethernet-usbgadget-not/cb30520a-753c-4219-b908-ad3d45590447?auth=1
• This guide is handy: http://irq5.io/2016/12/22/raspberry-pi-zero-as-multiple-usb-gadgets/

azsde

#!/bin/bash
#
# This version uses September 2017 august stretch image, please use this image
#

if [ "$EUID" -ne 0 ]
	then echo "Must be root"
	exit
fi