Skip to content

Instantly share code, notes, and snippets.

View carlsverre's full-sized avatar
🪐
Building SQLSync

Carl Sverre carlsverre

🪐
Building SQLSync
View GitHub Profile
@yzdbg
yzdbg / auto-dr.md
Last active November 3, 2023 17:11

Automating Daily Reports, because fuck it, really...

Each day at our company, developers are required to document their activities, painstakingly jotting down their daily work and future plans. A monotonous chore that I just really dislike.

So now, there's a scribe for that :

auto-dr-

Code

Rust Error Handling Cheatsheet - Result handling functions

Introduction to Rust error handling

Rust error handling is nice but obligatory. Which makes it sometimes plenty of code.

Functions return values of type Result that is "enumeration". In Rust enumeration means complex value that has alternatives and that alternative is shown with a tag.

Result is defined as Ok or Err. The definition is generic, and both alternatives have

@jdmaturen
jdmaturen / company-ownership.md
Last active July 29, 2023 22:39
Who pays when startup employees keep their equity?

Who pays when startup employees keep their equity?

JD Maturen, 2016/07/05, San Francisco, CA

As has been much discussed, stock options as used today are not a practical or reliable way of compensating employees of fast growing startups. With an often high strike price, a large tax burden on execution due to AMT, and a 90 day execution window after leaving the company many share options are left unexecuted.

There have been a variety of proposed modifications to how equity is distributed to address these issues for individual employees. However, there hasn't been much discussion of how these modifications will change overall ownership dynamics of startups. In this post we'll dive into the situation as it stands today where there is very near 100% equity loss when employees leave companies pre-exit and then we'll look at what would happen if there were instead a 0% loss rate.

What we'll see is that employees gain nearly 3-fold, while both founders and investors – particularly early investors – get dilute

@dannguyen
dannguyen / shakespeare-ngrams-cli-ack.md
Last active May 30, 2023 16:04
How to tokenize and create n-grams in Shakespeare from the command-line

Creating Shakespearean n-grams with just the command-line and regexes

This is a quick example showing how to use regexes to find tri-grams in Shakespeare...well, 570,872 of them, anyway, if we do some basic filtering of non-dialogue.

Though tokenization and n-grams should typically be done using a proper natural language processing framework, it's possible to do in a jiffy from the command-line, using standard Unix tools and ack, the better-than-grep utility.

What are n-grams?

@albertbori
albertbori / Installation.md
Last active May 4, 2024 18:21
Automatically disable Wifi when an Ethernet connection (cable) is plugged in on a Mac

Overview

This is a bash script that will automatically turn your wifi off if you connect your computer to an ethernet connection and turn wifi back on when you unplug your ethernet cable/adapter. If you decide to turn wifi on for whatever reason, it will remember that choice. This was improvised from this mac hint to work with Yosemite, and without hard-coding the adapter names. It's supposed to support growl, but I didn't check that part. I did, however, add OSX notification center support. Feel free to fork and fix any issues you encounter.

Most the credit for these changes go to Dave Holland.

Requirements

  • Mac OSX 10+
  • Administrator privileges

Latency numbers every programmer should know

L1 cache reference ......................... 0.5 ns
Branch mispredict ............................ 5 ns                     on recent CPU
L2 cache reference ........................... 7 ns                     14x L1 cache
Mutex lock/unlock ........................... 25 ns
Main memory reference ...................... 100 ns                     20x L2 cache, 200x L1 cache
Compress 1K bytes with Zippy ............. 3,000 ns  =   3 µs
Send 2K bytes over 1 Gbps network ....... 20,000 ns  =  20 µs
SSD random read ........................ 150,000 ns  = 150 µs

Read 1 MB sequentially from memory ..... 250,000 ns = 250 µs 4X memory

@pascalpoitras
pascalpoitras / config.md
Last active May 9, 2024 10:08
My WeeChat configuration

WeeChat Screenshot

Mouse


enable


@hellerbarde
hellerbarde / latency.markdown
Created May 31, 2012 13:16 — forked from jboner/latency.txt
Latency numbers every programmer should know

Latency numbers every programmer should know

L1 cache reference ......................... 0.5 ns
Branch mispredict ............................ 5 ns
L2 cache reference ........................... 7 ns
Mutex lock/unlock ........................... 25 ns
Main memory reference ...................... 100 ns             
Compress 1K bytes with Zippy ............. 3,000 ns  =   3 µs
Send 2K bytes over 1 Gbps network ....... 20,000 ns  =  20 µs
SSD random read ........................ 150,000 ns  = 150 µs

Read 1 MB sequentially from memory ..... 250,000 ns = 250 µs

@liamoc
liamoc / gist:762380
Created January 2, 2011 07:30
Creating Tables in C
#include <stdio.h>
/* BEGIN HACKERY */
typedef struct field {
enum {
TABLE_NAME,
TABLE_FIELD,
TABLE_TERMINATOR
} tag;
@isaacs
isaacs / node-and-npm-in-30-seconds.sh
Last active March 8, 2024 02:11
Use one of these techniques to install node and npm without having to sudo. Discussed in more detail at http://joyeur.com/2010/12/10/installing-node-and-npm/ Note: npm >=0.3 is *safer* when using sudo.
echo 'export PATH=$HOME/local/bin:$PATH' >> ~/.bashrc
. ~/.bashrc
mkdir ~/local
mkdir ~/node-latest-install
cd ~/node-latest-install
curl http://nodejs.org/dist/node-latest.tar.gz | tar xz --strip-components=1
./configure --prefix=~/local
make install # ok, fine, this step probably takes more than 30 seconds...
curl https://www.npmjs.org/install.sh | sh