See how a minor change to your commit message style can make you a better programmer.
Format: <type>(<scope>): <subject>
<scope>
is optional
Syncing an Ethereum node is largely reliant on IOPS, I/O Per Second. Budget SSDs will struggle to an extent, and some won't be able to sync at all.
This document aims to snapshot some known good and known bad models.
For size, 4TB comes recommended as of mid 2024. The smaller 2TB drive should last an Ethereum full node until early 2025 or thereabouts, with crystal ball uncertainty. Remy wrote a migration guide to 4TB.
High-level, QLC and DRAMless are far slower than "mainstream" SSDs. QLC has lower endurance as well. Any savings will be gone when the drive fails early and needs to be replaced.
(by @andrestaltz)
If you prefer to watch video tutorials with live-coding, then check out this series I recorded with the same contents as in this article: Egghead.io - Introduction to Reactive Programming.
L1 cache reference ......................... 0.5 ns
Branch mispredict ............................ 5 ns
L2 cache reference ........................... 7 ns
Mutex lock/unlock ........................... 25 ns
Main memory reference ...................... 100 ns
Compress 1K bytes with Zippy ............. 3,000 ns = 3 µs
Send 2K bytes over 1 Gbps network ....... 20,000 ns = 20 µs
SSD random read ........................ 150,000 ns = 150 µs
Read 1 MB sequentially from memory ..... 250,000 ns = 250 µs
For a brief user-level introduction to CMake, watch C++ Weekly, Episode 78, Intro to CMake by Jason Turner. LLVM’s CMake Primer provides a good high-level introduction to the CMake syntax. Go read it now.
After that, watch Mathieu Ropert’s CppCon 2017 talk Using Modern CMake Patterns to Enforce a Good Modular Design (slides). It provides a thorough explanation of what modern CMake is and why it is so much better than “old school” CMake. The modular design ideas in this talk are based on the book [Large-Scale C++ Software Design](https://www.amazon.de/Large-Scale-Soft
FWIW: I (@rondy) am not the creator of the content shared here, which is an excerpt from Edmond Lau's book. I simply copied and pasted it from another location and saved it as a personal note, before it gained popularity on news.ycombinator.com. Unfortunately, I cannot recall the exact origin of the original source, nor was I able to find the author's name, so I am can't provide the appropriate credits.
Latency Comparison Numbers (~2012) | |
---------------------------------- | |
L1 cache reference 0.5 ns | |
Branch mispredict 5 ns | |
L2 cache reference 7 ns 14x L1 cache | |
Mutex lock/unlock 25 ns | |
Main memory reference 100 ns 20x L2 cache, 200x L1 cache | |
Compress 1K bytes with Zippy 3,000 ns 3 us | |
Send 1K bytes over 1 Gbps network 10,000 ns 10 us | |
Read 4K randomly from SSD* 150,000 ns 150 us ~1GB/sec SSD |