Skip to content

Instantly share code, notes, and snippets.

View jmhebert's full-sized avatar

Jeffrey Hebert jmhebert

View GitHub Profile
@jmhebert
jmhebert / nano_flash_boot.txt
Created March 18, 2020 14:40
Nano boot sequence after flash.sh executes
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2020.03.18 09:55:14 =~=~=~=~=~=~=~=~=~=~=~=
0023.092] Enabled early print
[0023.094] [L4T TegraBoot] (version 00.00.2018.01-l4t-1463e5a5)
[0023.100] Processing in recovery mode
[0023.103] A02 Bootrom Patch rev = 1023
[0023.107] Power-up reason: pmc por
[0023.110] Established communication link with host
[0024.111] NvTbootI2cWrite(): error code 0x00045100 Error while starting write transaction
[0024.119] NvTbootI2cDeviceRead(): error code 0x00045001 Error while sending the offset to slave
[0024.127] NvTbootI2c: Read failed for slave 0xac, offset 0x00 with error code 0x00045001
@jmhebert
jmhebert / nano_flash_log.txt
Created March 18, 2020 14:37
Log from flash.sh script execution from terminal
(base) jeff@machine:~/nvidia/nvidia_sdk/JetPack_4.3_Linux_P3448/Linux_for_Tegra$ sudo ./flash.sh jetson-nano-qspi-sd mmcblk0p1
[sudo] password for jeff:
###############################################################################
# L4T BSP Information:
# R32 , REVISION: 3.1
###############################################################################
# Target Board Information:
# Name: jetson-nano-qspi-sd, Board Family: t210ref, SoC: Tegra 210,
# OpMode: production, Boot Authentication: ,
###############################################################################
@jmhebert
jmhebert / nano_boot_log_3.txt
Created March 17, 2020 15:23
Nano Boot Serial Console flash.sh
[0000.125] [L4T TegraBoot] (version 00.00.2018.01-l4t-39a9dc3d)
[0000.131] Processing in cold boot mode Bootloader 2
[0000.135] A02 Bootrom Patch rev = 1023
[0000.139] Power-up reason: pmc por
[0000.142] No Battery Present
[0000.145] pmic max77620 reset reason
[0000.148] pmic max77620 NVERC : 0x40
[0000.151] RamCode = 0
[0000.154] Platform has DDR4 type RAM
[0000.157] max77620 disabling SD1 Remote Sense
@jmhebert
jmhebert / Nano boot log 2.txt
Created March 17, 2020 14:34
Nano boot from Serial Debug Console
[0000.157] [L4T TegraBoot] (version 00.00.2018.01-l4t-39a9dc3d)
[0000.163] Processing in cold boot mode Bootloader 2
[0000.167] A02 Bootrom Patch rev = 1023
[0000.171] Power-up reason: software reset
[0000.175] No Battery Present
[0000.177] pmic max77620 reset reason
[0000.181] pmic max77620 NVERC : 0x0
[0000.184] RamCode = 0
[0000.186] Platform has DDR4 type RAM
[0000.190] max77620 disabling SD1 Remote Sense
@jmhebert
jmhebert / nano_flash_sh.log
Created March 17, 2020 14:23
Nano flash.sh log from command line
###############################################################################
# L4T BSP Information:
# R32 , REVISION: 3.1
###############################################################################
# Target Board Information:
# Name: jetson-nano-qspi-sd, Board Family: t210ref, SoC: Tegra 210,
# OpMode: production, Boot Authentication: ,
###############################################################################
./tegraflash.py --chip 0x21 --applet "/home/jeff/nvidia/nvidia_sdk/JetPack_4.3_Linux_P3448/Linux_for_Tegra/bootloader/nvtboot_recovery.bin" --skipuid --cmd "dump eeprom boardinfo cvm.bin"
Welcome to Tegra Flash
@jmhebert
jmhebert / gist:be617a99d799b500279608c09114561a
Created March 16, 2020 20:16
Nano SDK Manager Flash Failure
[0012.891] Enabled early print
[0012.894] [L4T TegraBoot] (version 00.00.2018.01-l4t-1463e5a5)
[0012.900] Processing in recovery mode
[0012.903] A02 Bootrom Patch rev = 1023
[0012.907] Power-up reason: pmc por
[0012.910] Established communication link with host
[0013.993] NvTbootI2cWrite(): error code 0x00045100 Error while starting write transaction
[0014.001] NvTbootI2cDeviceRead(): error code 0x00045001 Error while sending the offset to slave
[0014.009] NvTbootI2c: Read failed for slave 0xac, offset 0x00 with error code 0x00045001
[0264.126] Odmdata from BCT: 0x00094000