scyto

Enable & Using vGPU Passthrough

This gist is almost entirely not unlike Derek Seaman's awesome blog:

Proxmox VE 8: Windows 11 vGPU (VT-d) Passthrough with Intel Alder Lake

As such please refer to that for pictures, here i will capture the command lines I used as i sequence the commands a little differently so it makes more logic to me.

This gists assumes you are not running ZFS and are not passing any other PCIE devices (as both of these can require addtional steps - see Derek's blog for more info)

This gist assumes you are not running proxmox in UEFI Secure boot - if you are please refer entirely to dereks blog.

kopwei

Deploy K3s and Rancher on Raspberry Pi 4 cluster

Today I tried to setup a small Kubernetes cluster on top of 3 Raspberry Pi 4 (4GB Memory). Here is the steps to install the cluster.

Preparation

I have 3 Raspberry Pi 4 stacked with PoE headers and connected to a PoE switch at home. The are connected to Internet through a home router. All Pis are equipped with a 64GB Samsung SDXC card flushed with Ubuntu 20.04 image.

sam210723

# GNURadio + gr-iio setup (ADALM-PLUTO plugged in)
cd ~/Documents
mkdir PlutoSDR
cd PlutoSDR/
sudo apt-get install git python-pip
pip install --upgrade pip
pip install setuptools
sudo pip install git+https://github.com/gnuradio/pybombs.git
pybombs auto-config
pybombs recipes add-defaults

gabonator

Summary of passwords by sperglord8008s, updated November 1. 2020. For login try "root", "default", "defaul" or "root"

00000000
059AnkJ
4uvdzKqBkj.jg
7ujMko0admin
7ujMko0vizxv
123
1111
1234

prwhite

# Add the following 'help' target to your Makefile
# And add help text after each target name starting with '\#\#'
 
help:           ## Show this help.
	@fgrep -h "##" $(MAKEFILE_LIST) | fgrep -v fgrep | sed -e 's/\\$$//' | sed -e 's/##//'
 
# Everything below is an example
 
target00:       ## This message will show up when typing 'make help'
	@echo does nothing

endolith

ּ_בּ
בּ_בּ
טּ_טּ
כּ‗כּ
לּ_לּ
מּ_מּ
סּ_סּ
תּ_תּ
٩(×̯×)۶
٩(̾●̮̮̃̾•̃̾)۶