tprelog

#!/usr/bin/env bash

#
# Enable docker and docker-compose on TrueNAS SCALE (no Kubernetes)
#
# This script is a hack! Use it at your own risk!!
# Using this script to enable Docker is NOT SUPPORTED by ix-systems!
# You CANNOT use SCALE Apps while using this script!
#
# 1  Create a dedicated Docker dataset in one of your zpools

eloo

#include <avr/interrupt.h>
#include <avr/sleep.h>

// Arduino IDE settings
// BOD: 1.8V
// Clock: 1.2 MHz

// ATTiny13 pins/legs
// Leg 8: VCC
// Leg 4: GND

Jip-Hop

#!/usr/bin/env bash

#
# Enable docker and docker-compose on TrueNAS SCALE (no Kubernetes)
#
# This script is a hack! Use it at your own risk!!
# Using this script to enable Docker is NOT SUPPORTED by ix-systems!
# You CANNOT use SCALE Apps while using this script!
#
# 1  Create a dedicated Docker zvol on one of your zpools: zfs create -V 100G data/_docker

lordneon

Intro

This is a simple guide on how to automate UK lights with a Shelly 1 by installing the shelly 1 relay into the ceiling pendant which has both permanent live, neutral and a switched live back from the wall switch.

These steps are from my own experience making my lighting "smart" but also user friendly (it works via a wall switch!). This simple guide will go through replacing an a normal ceiling pendant with one with room for a Shelly 1. If you have a ceiling light with a bigger base it's even easier.

Warning Electrical regulations must be followed by law. If you are not a competent person under the regulations do not attempt electrical work. https://www.diydoctor.org.uk/projects/electrical_safety.htm

Wiring Diagram

This diagram has been taken from here and modified to include the Shelly 1.

andyyou

Rails 5.2 with webpacker, bootstrap, stimulus starter

This gist will collects all issues we solved with Rails 5.2 and Webpacker

Create Project

# Last few parameters(--skip-* part) is only my habbit not actully required
$ rails new <project_name> --webpack=stimulus --database=postgresql --skip-coffee --skip-test

wayneeseguin

reefab

skottler

Setting up netboot.xyz with an EdgeRouter

This document covers how to setup netboot.xyz, a service that provides iPXE-based installation and live boot of a bunch of operating systems, on a Ubiquiti EdgeRouter.

Assumptions

I've made a few assumptions throughout this document that will probably be different for your setup:

miblodelcarpio

weechat

Relay setup

On the server's instance of weechat:
    /relay add ssl.irc 8001
    /secure set relay WHATEVER_PASSWORD
    /set relay.network.password "${sec.data.relay}"
    
On the server, to generate the ssl certificate:

mattdsteele

Paprika doesn't have their API documented, so this is me reverse-engineering it from an Android device

Live Demo

https://knowing-grain.glitch.me/

Code: https://glitch.com/edit/#!/knowing-grain

Sync