mattmanning

Lbl G
ClrHome
Disp " J.M.'S DRUGWAR","   SIMULATION","","  VERSION 2.00","","  JUST SAY NO."
2000→Z
5000→Y
0→V
100→K
1→B
2→N
0→I

mschuetz

#!/bin/bash -e

function die() {
	echo $1 >&2
	exit 0
}

[[ -x $(which play) ]] || die "sox must be installed"

if [ $# -gt 0 ]; then

endolith

MIT License

Copyright (c) 2012 endolith

Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:

paulkaplan

// From http://www.tannerhelland.com/4435/convert-temperature-rgb-algorithm-code/

    // Start with a temperature, in Kelvin, somewhere between 1000 and 40000.  (Other values may work,
    //  but I can't make any promises about the quality of the algorithm's estimates above 40000 K.)

    
function colorTemperatureToRGB(kelvin){

    var temp = kelvin / 100;

edwardhotchkiss

DEVICE     = attiny85
CLOCK      = 8000000
PROGRAMMER = stk500v1
PORT	   = /dev/tty.usbmodem1421
BAUD       = 19200
FILENAME   = main
COMPILE    = avr-gcc -Wall -Os -DF_CPU=$(CLOCK) -mmcu=$(DEVICE)

all: usb clean build upload

stonehippo

// A simple trigger for the Adafruit Audio FX Sound Board
// For complete info on the sound board, see https://learn.adafruit.com/adafruit-audio-fx-sound-board/overview

/*
This is a simple test of a direct trigger of the Audio FX Sounds Board from an Arduino.

For my test, I used an Arduino Pro Mini running at 3.3v & 8mHz. Digital pin #4 of the Arduino
was connected to trigger pin #0 of the Sound Board, and I tied them to a common ground. I powered
Sound Board via a USB external battery for the initial tests, and the Arduino via the FTDI cable.
For later tests, I powered the Sound Board via the Arduino's VCC (3v) pin directly.

vielhuber

MP4 TO MP4 (MEDIUM)
ffmpeg -i input.mp4 -b 1000000 output.mp4

M2TS TO MP4
ffmpeg -i input.m2ts -vcodec libx264 -crf 20 -acodec ac3 -vf "yadif" output.mp4

MP4 TO WEBM (HIGH)
ffmpeg -i input.mp4 -aq 5 -ac 2 -qmax 25 -threads 2 output.webm
ffmpeg -i input.mp4 -c:v libvpx-vp9 -crf 30 -b:v 0 -b:a 128k -c:a libopus output.webm

gbaman

Setting up Pi Zero OTG - The quick way (No USB keyboard, mouse, HDMI monitor needed)

More details - http://blog.gbaman.info/?p=791

For this method, alongside your Pi Zero, MicroUSB cable and MicroSD card, only an additional computer is required, which can be running Windows (with Bonjour, iTunes or Quicktime installed), Mac OS or Linux (with Avahi Daemon installed, for example Ubuntu has it built in).
1. Flash Raspbian Jessie full or Raspbian Jessie Lite onto the SD card.
2. Once Raspbian is flashed, open up the boot partition (in Windows Explorer, Finder etc) and add to the bottom of the config.txt file dtoverlay=dwc2 on a new line, then save the file.
3. If using a recent release of Jessie (Dec 2016 onwards), then create a new file simply called ssh in the SD card as well. By default SSH i

ednisley

// Cylindrical cell adapters
// Ed Nisley KE4ZNU April 2017

//- Extrusion parameters must match reality!

ThreadThick = 0.25;
ThreadWidth = 0.40;

HoleWindage = 0.2;

rhydomako