Skip to content

Instantly share code, notes, and snippets.

Show Gist options
  • Save sekcompsci/2bf39e715d5fe47579fa184fa819f421 to your computer and use it in GitHub Desktop.
Save sekcompsci/2bf39e715d5fe47579fa184fa819f421 to your computer and use it in GitHub Desktop.
Comparison chips (SoCs) table for ESP8266/ESP32/ESP32-S2/ESP32-S3/ESP32-C3/ESP32-C6. Forked from @fabianoriccardi

Comparison chips (SoCs) table for ESP8266/ESP32/ESP32-S2/ESP32-S3/ESP32-C3/ESP32-C6

A minimal table to compare the Espressif's MCU families.

ESP8266 ESP32 ESP32-S2 ESP32-S3 ESP32-C3 ESP32-C6
Announcement Date 2014, August 2016, September 2019, September 2020, December 2020, November 2021, April
Main processor Tensilica L106 32-bit (up to 160MHz) Tensilica Xtensa 32-bit LX6 (up to 240MHz) (optionally dual core) Tensilica Xtensa 32-bit LX7 (up to 240MHz) Tensilica Xtensa 32-bit LX7 dual core (up to 240MHz) RISC-V 32-bit (up to 160MHz) RISC-V 32-bit (up to 160MHz)
SRAM 160KB 520KB 320KB 512KB 400KB 400KB
ROM 0 448KB 128KB 384KB 384KB 384KB
JTAG X ?
Cache 32 KB instruction 64KB 8/16KB (configurable) ? 16KB ?
WiFi Wi-Fi 4 (only up to 72.2Mbps) Wi-Fi 4 Wi-Fi 4 Wi-Fi 4 Wi-Fi 4 Wi-Fi 6
Bluetooth X BLE 4.2 (upgrade to 5.0, with limitations) X BLE 5.0 BLE 5.0 BLE 5.0
Ethernet X X ? X ?
RTC memory 768B 16KB 16KB 16KB 8KB ?
PMU ? ?
ULP coprocessor X ULP-RISC-V ? X ?
Cryptographic Accelerator X SHA, RSA, AES, RNG SHA, RSA, AES, RNG, HMAC, Digital Signature SHA, RSA, AES, RNG, HMAC, Digital Signature SHA, RSA, AES, RNG, HMAC, Digital Signature SHA, RSA, AES, RNG, HMAC, Digital Signature
Secure boot X
Flash encryption X XTS-AES-128/256 XTS-AES-128 XTS-AES-128
SPI 2 4 4 ? 3 ?
I2C 1 2 2 ? 1 ?
I2S 1 2 1 ? 1 ?
UART 2 (one TX only) 3 2 ? 2 ?
SDIO Host 0 1 0 2 0 0
SDIO Slave 0 1 0 0 0 0
GPIO 17 34 43 44 22 22
LED PWM 5 16 8 ? 6 ?
MCPWM 0 6 0 2 0 0
Pulse counter 0 8 4 ? 0 X
GDMA* 0 0 0 ? 6 ?
USB X X USB OTG 1.1 ? Serial/JTAG ?
TWAI** 0 1 1 ? 1 ?
ADC 1x 10-bit SAR 2x 12-bit SAR, up to 18 channels 2x 13-bit SAR, up to 20 channels ? 2x 12-bit SAR, up to 6 channels ?
DAC X 2x 8-bit 2x 8-bit ? X X
RMT 1x transmission + 1x reception 8x transmission/reception 4x transmission/reception ? 2x transmission + 2x reception ?
Timer 2x 23-bit*** 4x 64-bit 4x 64-bit ? 2x 54-bit + 1x 52-bit ?
Temperature Sensor ? ?
Hall Sensor X X ? X ?
Touch Sensor 0 10 14 ? X ?

* All the MCUs have some sort of DMA. However, if this field is not checked, it means that the user hasn't the direct control over DMA. With General DMA term, Espressif intends a specific DMA peripheral in full control of user. He will be responsible to manage such peripheral.

** In some old datasheet and documentation, it was referred as CAN bus.

*** A timer is dedicated to Wi-Fi, so you cannot freely use it.

For more details about specific models and variants, look at Espressif Product Selector.

The table will be updated as new information will be released. Contributions and suggestions are welcomed!

@zaid894
Copy link

zaid894 commented Sep 26, 2022

Thank you

@stefan-sherwood
Copy link

@josehdx
Copy link

josehdx commented Sep 28, 2022

https://products.espressif.com/#/product-selector

I havent been able to verify if the s3 with USB OTG, has full USB-Host capabilities, as is not clear if the board can provide 5V power to small devices via the USB C port. There is a dev board with even 2 usb ports and there is a hack to "route" power from some buses to the OTG port

I read in toher forum that the boards has the Host capabilities but no power capabilities, so small devices should be powered apart.

I dont have a clear answer for this so asked to Adafruit but no answer yet:

https://forums.adafruit.com/viewtopic.php?t=194368

@stefan-sherwood
Copy link

I havent been able to verify if the s3 with USB OTG, has full USB-Host capabilities

The datasheet says it's supported.

3.5.11 USB 2.0 OTG Full-Speed Interface

ESP32-S3 features a full-speed USB OTG interface along with an integrated transceiver. The USB OTG interface
complies with the USB 2.0 specification.

@psg666
Copy link

psg666 commented Oct 13, 2022

Great summary! Do you plan to add power consumption as well (avg and peak under different conditions)?

@TheWobbagong
Copy link

TheWobbagong commented Oct 22, 2022

Great summary! Do you plan to add power consumption as well (avg and peak under different conditions)?

Agreed and yes please

@sekcompsci
Copy link
Author

Hey everyone. I have an official comparison site to recommend.

That's ESP Product Comparison

Let's try it.

@66mhz
Copy link

66mhz commented Nov 24, 2022

I was looking for a comparison table, this is probably the best, thanks a lot

@Anutrix
Copy link

Anutrix commented Dec 6, 2022

https://docs.espressif.com/projects/esp-idf/en/v5.0/esp32s3/hw-reference/chip-series-comparison.html.

There's some more data here which can filled on this page a bit.

@a-v-s
Copy link

a-v-s commented Dec 10, 2022

The ESP8266 does support JTAG, See https://visualgdb.com/tutorials/esp8266/nodemcu/jtag/

@RomanAlexandroff
Copy link

https://products.espressif.com/#/product-selector

stefan-sherwood, OMG, dude! You are the best!!!

@jumpjack
Copy link

this table needs now a further column on right repeating contents of first column.

@rcarrico
Copy link

Espresssif video from DevCon23 given by Mohammad Afaneh says the ESP32-C6 has Bluetooth 5.3?
https://youtu.be/qqpvH6zJuhM?si=2_UJFA1Oo_tEyAh0&t=1462
image

@bynux-gh
Copy link

bynux-gh commented Jan 7, 2024

ESP32-S3 series does also have touch sensing capability on 14 pins. Source here.

@thomasfredericks
Copy link

Thank you for the table. It is simpler to read than https://products.espressif.com/#/product-comparison !
An important omission is the Floating Point Unit. For example, the ESP32-S2 does not have a FPU! For sources, see :

@Spacechild1
Copy link

Spacechild1 commented Feb 13, 2024

An important omission is the Floating Point Unit. For example, the ESP32-S2 does not have a FPU!

Neither do the C3 and C6! https://docs.espressif.com/projects/esp-idf/en/v5.1.2/esp32c6/api-guides/performance/speed.html

@rtek1000
Copy link

rtek1000 commented Mar 3, 2024

@drelephant
Copy link

ESP32 S2 and S3 are the only ones that support USB Host mode, and JTAG debugging over USB, might be worth adding.

@matteovidali
Copy link

For the ESP32c6:

Cache (32 KB)

Datasheet P.35 (3.1.6 Cache)
Cache size of 32 KB

ESP32-C6 has an four-way set associative cache. This cache is read-only and has the following features:
• size: 32 KB
• pre-load function
• lock function
• critical word first and early restart

No Ethernet

RTC MEM moved to LP MEM (low power memory)

There Is a PMU (p4. specifies the power modes and discusses pmu)

Interfaces:

Advanced Peripheral Interfaces
• 30 × GPIOs (QFN40), or 22 × GPIOs (QFN32)
• Analog interfaces:
– 1 × 12-bit SAR ADC, up to 7 channels
– 1 × temperature sensor
• Digital interfaces:
– 2 × UART
– 1 × Low-power (LP) UART
– 2 × SPI ports for communication with flash
– 1 × General purpose SPI port
– 1 × I2C
– 1 × Low-power (LP) I2C
– 1 × I2S
– 1 × Pulse count controller
– 1 × USB Serial/JTAG controller
– 2 × TWAI® controller, compatible with ISO
11898-1 (CAN Specification 2.0)
– 1 × SDIO 2.0 slave controller
– LED PWM controller, up to 6 channels
– 1 × Motor Control PWM (MCPWM)
– 1 × Remote control peripheral (TX/RX)
– 1 × Parallel IO interface (PARLIO)
– General DMA controller, with 3 transmit
channels and 3 receive channels
– Event task matrix (ETM)
• Timers:
– 1 × 52-bit system timer
– 2 × 54-bit general-purpose timers
– 3 × digital watchdog timers
– 1 × analog watchdog timer

So we have to fill in:

Peripherals->

  • Three SPI controllers (2 flash 1 gp)
  • 1 I2C + 1 LPI2C
  • 1 I2S
  • 2 UART & 1 LPUART
  • 1 Pulse Count controller
  • 6 LEDPWM
  • 1 MCPWM
  • 3 GDMA
  • Serial & jtag USB interface
  • 2 54bit gTimer and 1 52bit sysTimer
  • 1 12bit ADC (7 channels
  • 1 temp sense
  • 2 TWAI controller
  • 1 RMT
  • No Hall No Touch

@egnor
Copy link

egnor commented Jul 14, 2024

@sekcompsci - some suggestions?

  • probably credit @fabianoriccardi (author of the content you forked) and describe your changes?
  • clarify that this is comparing chips (SoCs) rather than modules (silver boxes). for example most modules will have fewer GPIOs than the chip itself offers?
  • replace all "0" and "X" with "-" which is a clearer indication of absence?
  • I think we can fill in all the "?" now?

I'd be happy to send you a diff or make a fork or something-- unfortunately gists don't support pull requests I think?

@sekcompsci
Copy link
Author

@sekcompsci - some suggestions?

  • probably credit @fabianoriccardi (author of the content you forked) and describe your changes?
  • clarify that this is comparing chips (SoCs) rather than modules (silver boxes). for example most modules will have fewer GPIOs than the chip itself offers?
  • replace all "0" and "X" with "-" which is a clearer indication of absence?
  • I think we can fill in all the "?" now?

I'd be happy to send you a diff or make a fork or something-- unfortunately gists don't support pull requests I think?

probably credit @fabianoriccardi (author of the content you forked) and describe your changes?

= I have no modifications. I only forked for ease of later reference (many times the original goes missing). Thanks for your suggestion, I'll definitely add credit to the original author.

clarify that this is comparing chips (SoCs) rather than modules (silver boxes). for example most modules will have fewer GPIOs than the chip itself offers?

= Correct, I'll add this clarification to the description.

replace all "0" and "X" with "-" which is a clearer indication of absence?

= I prefer to keep it as it is in the original.

I think we can fill in all the "?" now?

= Yes, but for the same reason as above, I haven't changed anything and recommend referring to a newer, more up-to-date source: https://gist.github.com/sekcompsci/2bf39e715d5fe47579fa184fa819f421?permalink_comment_id=4348602#gistcomment-4348602

I'd be happy to send you a diff or make a fork or something-- unfortunately gists don't support pull requests I think?

= Yes, unfortunately.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment