-
-
Save thomasfr/9707568 to your computer and use it in GitHub Desktop.
[Unit] | |
Description=Keeps a tunnel to 'remote.example.com' open | |
After=network.target | |
[Service] | |
User=autossh | |
# -p [PORT] | |
# -l [user] | |
# -M 0 --> no monitoring | |
# -N Just open the connection and do nothing (not interactive) | |
# LOCALPORT:IP_ON_EXAMPLE_COM:PORT_ON_EXAMPLE_COM | |
ExecStart=/usr/bin/autossh -M 0 -N -q -o "ServerAliveInterval 60" -o "ServerAliveCountMax 3" -p 22 -l autossh remote.example.com -L 7474:127.0.0.1:7474 -i /home/autossh/.ssh/id_rsa | |
[Install] | |
WantedBy=multi-user.target |
@dimasmamot Interactive authentication required
seems to be the key part of the error msg to me. Try executing the command first as sudo to see what interactive prompts are required. Most likely you need to add a new host key to /root/.ssh/known_hosts
.
dynamic auttossh@.service
[Unit]
Description=autossh: %I
Documentation=file:///usr/share/doc/autossh/README.service man:autossh(1)
After=network.target
[Service]
User=autossh
Environment="AUTOSSH_GATETIME=0"
EnvironmentFile=/etc/autossh/%i.conf
ExecStart=/usr/bin/autossh $OPTIONS
[Install]
WantedBy=multi-user.target
Running into a strange problem....
/etc/systemd/system/autossh.service
[Unit]
Description=AutoSSH tunnel
After=network.target
[Service]
Environment="AUTOSSH_GATETIME=0"
ExecStart=/usr/bin/autossh -N -M 10984 -o "PubkeyAuthentication=yes" -o "PasswordAuthentication=no" -i ~/.ssh/id_rsa -R 6666:localhost:22 ********@********** -p 22
[Install]
WantedBy=multi-user.target
After running daemon-reload and sudo systemctl start autossh
I can see it running after issuing a ps ax | grep autossh
with the exact command in the ExecStart listed above. However, when I check my remote host, nothing is listening on port 6666.
However, if I copy/paste that exact ExecStart line into a terminal and run it manually, it connects fine. I can reverse SSH to port 6666 without issue. So the command runs fine, when entered manually....but with systemd I see the service running, no errors, but no connection. Any ideas?
This is on CentOS 7....
There's some unsound advice in the comments here, see https://gist.github.com/Strykar/a65cf6461fdcc41a3e78f5fbbf9e18f9
Some stuff is overkill, e.g.
- you don't need the ExecStop,
systemctl stop autossh
will work just fine out of the box - you don't need the AUTOSSH_GATETIME setting
Some stuff is overkill, e.g.
* you don't need the AUTOSSH_GATETIME setting
Of course you do, without it autossh will give up if the very first connection attempt fails.
You USED to not need it, because it was implied by the -f
flag. Except that systemd does not support the -f
flag.
@ScumCoder this wasn't my experience of it, I never used AUTOSSH_GATETIME but I use autossh and it does retry. It's been a while since I looked at it though, so stuff may have changed.
Hi, I have this service for tunnel with autossh
[Unit]
Description=Open my Tunnel
After=network.target
[Service]
ExecStart=autossh -M 12000 -N -f -o "PubkeyAuthentication=yes" -o "PasswordAuthentication=no" -o ServerAliveInterval=60 -o ServerAliveCountMax=3 -i /home/usrtunel/.ssh/clavetunel -R 7090:localhost:7080 usrremote@100.xxx.xxx.xxx -p YYY
WorkingDirectory=/opt/run
RestartSec=5
Restart=always
[Install]
WantedBy=multi-user.target
If I run the autossh by hand, in command line, the tunnel remains open and working fine.
But with the service I found that every a while the service restart
My log shows this:
Dec 27 19:26:51 myserver autossh[24726]: starting ssh (count 1)
Dec 27 19:26:51 myserver autossh[24726]: ssh child pid is 24727
Dec 27 19:26:51 myserver autossh[24726]: received signal to exit (15)
Dec 27 19:26:57 myserver autossh[24732]: starting ssh (count 1)
Dec 27 19:26:57 myserver autossh[24732]: ssh child pid is 24733
Dec 27 19:26:57 myserver autossh[24732]: signalled to exit
Dec 27 19:28:32 myserver autossh[24897]: starting ssh (count 1)
Dec 27 19:28:32 myserver autossh[24897]: ssh child pid is 24898
Dec 27 19:28:32 myserver autossh[24897]: signalled to exit
Dec 27 19:30:08 myserver autossh[25106]: starting ssh (count 1)
Dec 27 19:30:08 myserver autossh[25106]: ssh child pid is 25107
Dec 27 19:30:08 myserver autossh[25106]: signalled to exit
Dec 27 19:31:43 myserver autossh[25278]: starting ssh (count 1)
Dec 27 19:31:43 myserver autossh[25278]: ssh child pid is 25279
Dec 27 19:31:43 myserver autossh[25278]: signalled to exit
What I see is that service stop autossh every few minutes, why? where is the error?
@jotakar I've been using:
[Unit]
Description=Keep open a reverse tunnel to my computer via the DMZ server
After=network.target
[Service]
ExecStart=/usr/bin/ssh -NT tunnel
RestartSec=5
Restart=always
[Install]
WantedBy=multi-user.target
With tunnel
defined in /root/.ssh/config
as
Host tunnel
HostName <redacted>
User <redacted>
IdentityFile ~/.ssh/id_tunnel
ProxyCommand ssh bastion -W %h:%p
RemoteForward <redacted port> localhost:22
ExitOnForwardFailure yes
ServerAliveCountMax 5
And the bastion
host also defined in the same file as
Host bastion
HostName <redacted>
User <redacted>
IdentityFile ~/.ssh/id_tunnel
ForwardAgent yes
I also have
Host *
ServerAliveInterval 60
IdentitiesOnly yes
at the top of my /root/.ssh/config
, on the off-chance that's relevant.
I've found this to be very consistent and stable, and easy to test (ssh bastion
, ssh -NT tunnel
) when setting it up. Perhaps removing autossh and setting it up this way might help?
For completeness, you should also add:
ExecStop=kill -9 autosshWithout it
systemctl stop autossh
won't do anything.
I think it would be better idea to add
KillMode=control-group
to the .service
file because that will kill everything that was started (recursively) and nothing more. In addition, it will first send SIGTERM
and use SIGKILL
only if the process will not stop nicely.
If you randomly kill one or all autossh
processes in the system, you might kill more than expected if autossh
is used for other stuff, too.
See https://www.freedesktop.org/software/systemd/man/systemd.kill.html#KillMode= for details
@jotakar :
What I see is that service stop autossh every few minutes, why? where is the error?
Don't use -f
when using autossh as a systemd simple service. It will fork autossh (put in the background) and confuse systemd into thinking it ended.
Of course you do, without it autossh will give up if the very first connection attempt fails.
Systemd's Restart=always
and RestartSec=60
can take care of that. You usually want autossh to fail fast if it can't do the first connection, as it usually means misconfiguration or authentication issues, and giving up after first attempt helps highlighting that on the journalctl
logs.
JFYI: I created an SSH tunnel SystemD service that works without the autossh github.com/yurt-page/sshtunnel
@jotakar :
What I see is that service stop autossh every few minutes, why? where is the error?
Don't use
-f
when using autossh as a systemd simple service. It will fork autossh (put in the background) and confuse systemd into thinking it ended.Of course you do, without it autossh will give up if the very first connection attempt fails.
Systemd's
Restart=always
andRestartSec=60
can take care of that. You usually want autossh to fail fast if it can't do the first connection, as it usually means misconfiguration or authentication issues, and giving up after first attempt helps highlighting that on thejournalctl
logs.
Yes, I just remove the '-f' option, it seems fine.
I get this error
mamot@pg-1-mamot-dawn:/etc/systemd/system$ systemctl start autossh-mamot-hook.service Failed to start autossh-mamot-hook.service: Interactive authentication required. See system logs and 'systemctl status autossh-mamot-hook.service' for details.
this is my script
ExecStart=/usr/bin/autossh -M 0 -N -o "ServerAliveInterval 60" -o "ServerAliveCountMax 3" -R mamot-hook.serveo.net:80:localhost:80 serveo.net
any idea ?