FreddieOliveira

Docker on Android 🐋📱

Edit 🎉

All packages, except for Tini have been added to termux-root. To install them, simply pkg install root-repo && pkg install docker. This will install the whole docker suite, left only Tini to be compiled manually.

---

Summary

dixyes

ASUS ROG Zephyrus G14 2022 GA402RJ pci passthrough

This is a record for my own passthrough setup, I can finally use a single laptop for windows gaming and linux programming at the same time.

The device

My G14 is GA402RJ(6800HS + 6700s) with MT7922 WiFi/BT card.

At this time, BIOS version is 309.

mondain

23.21.150.121:3478
iphone-stun.strato-iphone.de:3478
numb.viagenie.ca:3478
s1.taraba.net:3478
s2.taraba.net:3478
stun.12connect.com:3478
stun.12voip.com:3478
stun.1und1.de:3478
stun.2talk.co.nz:3478
stun.2talk.com:3478

joepie91

Don't use VPN services.

No, seriously, don't. You're probably reading this because you've asked what VPN service to use, and this is the answer.

Note: The content in this post does not apply to using VPN for their intended purpose; that is, as a virtual private (internal) network. It only applies to using it as a glorified proxy, which is what every third-party "VPN provider" does.

• A Russian translation of this article can be found here, contributed by Timur Demin.
• A Turkish translation can be found here, contributed by agyild.
• There's also this article about VPN services, which is honestly better written (and has more cat pictures!) than my article.

tomdaley92

Proxmox - SPICE client setup for MacOS

1. Install a working (and compiled) version of virt-viewer. You may view the homebrew package's upstream source on GitHub.

   brew tap jeffreywildman/homebrew-virt-manager
   brew install virt-viewer

2. Once that's installed should be able make a call remote-viewer with a pve-spice.vv file downloaded from proxmox web interface

scyto

Enable & Using vGPU Passthrough

This gist is almost entirely not unlike Derek Seaman's awesome blog:

Proxmox VE 8: Windows 11 vGPU (VT-d) Passthrough with Intel Alder Lake

As such please refer to that for pictures, here i will capture the command lines I used as i sequence the commands a little differently so it makes more logic to me.

This gists assumes you are not running ZFS and are not passing any other PCIE devices (as both of these can require addtional steps - see Derek's blog for more info)

This gist assumes you are not running proxmox in UEFI Secure boot - if you are please refer entirely to dereks blog.

Al-Azif

Docker Exploit Redirect (PS4 & PS5)

1. Install Docker Desktop
2. Change the REDIRECT_IPV4 address to your computer's IP
3. Change the ROOT_DOMAIN and ROOT_DOMAIN_PATH to where you want to redirect to (Change redirect type if necessary)
4. With Docker running run docker compose up -d from cmd in the directory with this file

• This will install and start the Docker images

5. On your PS4/PS5 use your computer's IP for the primary DNS server. You can skip secondary or use the same IP again if you wish.
6. Profit

L422Y

I have spent quite a bit of time figuring out automounts of NFS shares in OS X...

Somewhere along the line, Apple decided allowing mounts directly into /Volumes should not be possible:

/etc/auto_master (see last line):

#
# Automounter master map
#

+auto_master # Use directory service

egg82

Proxmox

Find the proper driver at the NVidia website.

Note: Make sure to select "Linux 64-bit" as your OS

Hit the "Search" button.

oofnikj

KEYMAPOPTS="us us"
HOSTNAMEOPTS="-n alpine"
INTERFACESOPTS="auto lo
iface lo inet loopback

auto eth0
iface eth0 inet dhcp
    hostname alpine
"
TIMEZONEOPTS="-z UTC"