Skip to content

Instantly share code, notes, and snippets.

View ayumi's full-sized avatar
🍅
ᕕ( ᐛ )ᕗ

ayumi  yu ayumi

🍅
ᕕ( ᐛ )ᕗ
View GitHub Profile

What Hiring Should Look Like

This is definitely not the first time I've written about this topic, but I haven't written formally about it in quite awhile. So I want to revisit why I think technical-position interviewing is so poorly designed, and lay out what I think would be a better process.

I'm just one guy, with a bunch of strong opinions and a bunch of flaws. So take these suggestions with a grain of salt. I'm sure there's a lot of talented, passionate folks with other thoughts, and some are probably a lot more interesting and useful than my own.

But at the same time, I hope you'll set aside the assumptions and status quo of how interviewing is always done. Just because you were hired a certain way, and even if you liked it, doesn't mean that it's a good interview process to repeat.

If you're happy with the way technical interviewing currently works at your company, fine. Just stop, don't read any further. I'm not going to spend any effort trying to convince you otherwise.

@excid3
excid3 / dynamic-nginx-module-ubuntu-18.04.sh
Created June 20, 2018 17:58
How to compile a dynamic nginx module for Ubuntu 18.04
# Install dependencies that nginx was originally compiled with
sudo apt install libperl-dev libgeoip-dev libgd-dev
# Get the nginx source
wget https://nginx.org/download/nginx-1.14.0.tar.gz
tar zxf nginx-1.14.0.tar.gz
# Get the module source
wget https://github.com/fdintino/nginx-upload-module/archive/master.zip
unzip master.zip
@kevinlawler
kevinlawler / fix-new-build-runbook.txt
Last active November 3, 2017 18:56
New Release Runbook (if it doesn't work on your system) - Brave
New Release Runbook (if it doesn't work on your system)
(if you get git network failures, try raising config http.postBuffer)
Definitions:
B-L-B: .../browser-laptop-bootstrap
B-L: .../browser-laptop-bootstrap/src/browser-laptop
MUON: .../browser-laptop-bootstrap/src/electron
1. Download it:
@pkirkovsky
pkirkovsky / yubikey-reset.sh
Last active September 9, 2024 12:25
Utility for resetting a Yubikey to factory defaults using gpg-connect-agent. This will wipe out any stored keys and reset PINs to default values.
# Adapted from https://developers.yubico.com/ykneo-openpgp/ResetApplet.html
gpg-connect-agent <<EOF
/hex
scd serialno
scd apdu 00 20 00 81 08 40 40 40 40 40 40 40 40
scd apdu 00 20 00 81 08 40 40 40 40 40 40 40 40
scd apdu 00 20 00 81 08 40 40 40 40 40 40 40 40
scd apdu 00 20 00 81 08 40 40 40 40 40 40 40 40
scd apdu 00 20 00 83 08 40 40 40 40 40 40 40 40
scd apdu 00 20 00 83 08 40 40 40 40 40 40 40 40
@kennwhite
kennwhite / vpn_psk_bingo.md
Last active November 1, 2024 17:27
Most VPN Services are Terrible

Most VPN Services are Terrible

Short version: I strongly do not recommend using any of these providers. You are, of course, free to use whatever you like. My TL;DR advice: Roll your own and use Algo or Streisand. For messaging & voice, use Signal. For increased anonymity, use Tor for desktop (though recognize that doing so may actually put you at greater risk), and Onion Browser for mobile.

This mini-rant came on the heels of an interesting twitter discussion: https://twitter.com/kennwhite/status/591074055018582016

#!/bin/bash
#
# This script will mount /Users in the boot2docker VM using NFS (instead of the
# default vboxsf). It's probably not a good idea to run it while there are
# Docker containers running in boot2docker.
#
# Usage: sudo ./boot2docker-use-nfs.sh
#
@skanev
skanev / rubocop.rb
Last active March 13, 2024 08:24
A Rubocop wrapper that checks only added/modified code
#!/usr/bin/env ruby
# A sneaky wrapper around Rubocop that allows you to run it only against
# the recent changes, as opposed to the whole project. It lets you
# enforce the style guide for new/modified code only, as opposed to
# having to restyle everything or adding cops incrementally. It relies
# on git to figure out which files to check.
#
# Here are some options you can pass in addition to the ones in rubocop:
#
@scribu
scribu / repl.js
Last active December 23, 2017 15:20
Simplistic REPL for CasperJS
// Usage: require('repl').start.call(this);
// Press Ctrl+D to continue script
// Press Ctrl+C to exit.
require = patchRequire(require);
var system = require('system');
var utils = require('utils');
exports.start = function(prompt) {
@shevron
shevron / LICENSE
Last active April 28, 2020 02:28
Send EC2 instance memory usage stats to CloudWatch using boto and IAM Roles
Copyright (c) 2015, Shahar Evron
All rights reserved.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
@brandonb927
brandonb927 / osx-for-hackers.sh
Last active October 20, 2024 14:41
OSX for Hackers: Yosemite/El Capitan Edition. This script tries not to be *too* opinionated and any major changes to your system require a prompt. You've been warned.
#!/bin/sh
###
# SOME COMMANDS WILL NOT WORK ON macOS (Sierra or newer)
# For Sierra or newer, see https://github.com/mathiasbynens/dotfiles/blob/master/.macos
###
# Alot of these configs have been taken from the various places
# on the web, most from here
# https://github.com/mathiasbynens/dotfiles/blob/5b3c8418ed42d93af2e647dc9d122f25cc034871/.osx