intari

## proxmox-vGPU.md

      
              3 files
            
          
              11 forks
            
          
              71 comments
            
          
              77 stars
            
          
                scyto
                / proxmox-vGPU.md
            
            
              Last active
              April 25, 2024 21:10
            
          
    Enable & Using vGPU Passthrough

This gist is almost entirely not unlike Derek Seaman's awesome blog:
Proxmox VE 8: Windows 11 vGPU (VT-d) Passthrough with Intel Alder Lake
As such please refer to that for pictures, here i will capture the command lines I used as i sequence the commands a little differently so it makes more logic to me.
This gists assumes you are not running ZFS and are not passing any other PCIE devices (as both of these can require addtional steps - see Derek's blog for more info)
This gist assumes you are not running proxmox in UEFI Secure boot - if you are please refer entirely to dereks blog.

  
## README.md

      
              1 file
            
          
              0 forks
            
          
              0 comments
            
          
              3 stars
            
          
                snowinmars
                / README.md
            
            
              Last active
              January 23, 2023 20:10
            
              
                Create matrix and element - docker/nginx/caddy/certbot/letsencrypt
              
          
    How to self-host Matrix and Element with docker compose

Moved to https://github.com/snowinmars/matrix-setup

  
## docker-swarm-architecture.md

      
              1 file
            
          
              19 forks
            
          
              24 comments
            
          
              105 stars
            
          
                scyto
                / docker-swarm-architecture.md
            
            
              Last active
              April 7, 2024 01:37
            
              
                My Docker Swarm Architecture
              
          
    This (and related gists) captures how i created my docker swarm architecture.  This is intended mostly for my own notes incase i need to re-creeate anything later! As such expect some typos and possibly even an error...
Installation Step-by-Step

Each major task has its own gist, this is to help with maitainability long term.

Install Debian VM for each docker host
install Docker
Configure Docker Swarm
Install Portainer
Install KeepaliveD
glusterFS disk prep, install & config 


## certbot_pip_install-debian_ubuntu.md

      
              1 file
            
          
              7 forks
            
          
              5 comments
            
          
              34 stars
            
          
                bmatthewshea
                / certbot_pip_install-debian_ubuntu.md
            
            
              Last active
              April 18, 2024 16:40
            
              
                Debian/Ubuntu - CERTBOT without SNAP/SNAPD
              
          
    CERTBOT - Install using Python PIP

Install Certbot using Python PIP (Package Installer for Python) - without using SNAP, APT or SYSTEMD. (Debian/Ubuntu)

This guide will help you install LetsEncrypt / Certbot using venv PIP under Debian/Ubuntu.

This guide has been tested up to Debian 12 / Bookworm.


## README.md

      
              2 files
            
          
              20 forks
            
          
              63 comments
            
          
              174 stars
            
          
                tomdaley92
                / README.md
            
            
              Last active
              April 23, 2024 16:52
            
              
                Proxmox - SPICE Client setup for MacOS
              
          
    Proxmox - SPICE client setup for MacOS


Install a working (and compiled) version of virt-viewer. You may view the homebrew package's upstream source on GitHub.
brew tap jeffreywildman/homebrew-virt-manager
brew install virt-viewer


Once that's installed should be able make a call remote-viewer with a pve-spice.vv file downloaded from proxmox web interface


## one_drive_cleanup_mac.md

      
              1 file
            
          
              0 forks
            
          
              0 comments
            
          
              1 star
            
          
                Dulani
                / one_drive_cleanup_mac.md
            
            
              Last active
              October 23, 2021 08:14
            
          
    OneDrive for Mac is having huge issues so I'm trying to move the files out of its folder and start over again... but I'm being blocked by extended attributes named: com.apple.fileutil.PlaceholderData.
You can see them with: ls -alh@e or xattr <dir name>
Example: https://www.reddit.com/r/onedrive/comments/dk8hcx/onedrive_on_macos_is_adding_extendedfile/
Remove them:
sudo xattr -rd com.apple.fileutil.PlaceholderData <dir name> 


## PVE-host-backup.md

      
              1 file
            
          
              33 forks
            
          
              21 comments
            
          
              147 stars
            
          
                mrpeardotnet
                / PVE-host-backup.md
            
            
              Created
              December 17, 2019 18:03
            
              
                Proxmox PVE Host Config Backup Script
              
          
    Proxmox PVE Host Config Backup Script

This script can be used to backup essential configuration files from the Proxmox Virtual Enivronment (PVE) host.
The script will create backups using tar with specified backup prefix and date and time stamp in the file name. Script will also delete  backups that are older then number of days specified.
Create backup script file

To create backup script that will be executed every day we can create backup script in /etc/cron.daily/ folder. We need to make it writeable by root (creator) only, but readable and executable by everyone:
touch /etc/cron.daily/pvehost-backup


## ActivitiesModule.kt
@Module
abstract class ActivitiesModule {

  @ContributesAndroidInjector(modules = [MainActivityModule::class])
  abstract fun contributeMainActivity(): MainActivity

  // Other activities come here, same as above.
}

## ContentUriRequestBody.kt
import android.content.ContentResolver
import android.net.Uri
import okhttp3.MediaType
import okhttp3.RequestBody
import okio.BufferedSink
import okio.Okio
import java.lang.IllegalStateException

class ContentUriRequestBody(
        private val contentResolver: ContentResolver,

## gist:e2fefa48c79bafb59b23ffefa8384bb3
/interface wireless channels

add band=2ghz-b/g/n width=20 list=2GHz/20MHz frequency=2412 name=ch1
add band=2ghz-b/g/n width=20 list=2GHz/20MHz frequency=2437 name=ch6
add band=2ghz-b/g/n width=20 list=2GHz/20MHz frequency=2462 name=ch11

add band=5ghz-onlyac width=20 list=5GHz/80MHz extension-channel=Ceee frequency=5180 name=ch36/38/42
add band=5ghz-onlyac width=20 list=5GHz/80MHz extension-channel=eCee frequency=5200 name=ch40/38/42
add band=5ghz-onlyac width=20 list=5GHz/80MHz extension-channel=eeCe frequency=5220 name=ch44/46/42
add band=5ghz-onlyac width=20 list=5GHz/80MHz extension-channel=eeeC frequency=5240 name=ch48/46/42
	@Module
	abstract class ActivitiesModule {

	@ContributesAndroidInjector(modules = [MainActivityModule::class])
	abstract fun contributeMainActivity(): MainActivity

	// Other activities come here, same as above.
	}
	import android.content.ContentResolver
	import android.net.Uri
	import okhttp3.MediaType
	import okhttp3.RequestBody
	import okio.BufferedSink
	import okio.Okio
	import java.lang.IllegalStateException

	class ContentUriRequestBody(
	private val contentResolver: ContentResolver,
	/interface wireless channels

	add band=2ghz-b/g/n width=20 list=2GHz/20MHz frequency=2412 name=ch1
	add band=2ghz-b/g/n width=20 list=2GHz/20MHz frequency=2437 name=ch6
	add band=2ghz-b/g/n width=20 list=2GHz/20MHz frequency=2462 name=ch11

	add band=5ghz-onlyac width=20 list=5GHz/80MHz extension-channel=Ceee frequency=5180 name=ch36/38/42
	add band=5ghz-onlyac width=20 list=5GHz/80MHz extension-channel=eCee frequency=5200 name=ch40/38/42
	add band=5ghz-onlyac width=20 list=5GHz/80MHz extension-channel=eeCe frequency=5220 name=ch44/46/42
	add band=5ghz-onlyac width=20 list=5GHz/80MHz extension-channel=eeeC frequency=5240 name=ch48/46/42