- BeagleBone Blue
- 3D printed BeagleBone Blue case
- Martian II 220mm frame
- Racerstar RS20Ax4-V2 Quad electronic speed control
- Racerstar motors
- Props
- 2S LiPo battery
- XT60 socket
- DSM transmitter
- DSM satellite receiver
- 4-wire JST-SH cable
- velcro
- wires, solder and soldering iron
- heat-shrink tubing and hot air gun
The motors should be configured as "Quad X" where BeagleBone Blue's USB connector is forward-facing.
- yellow
- orange
- green/black
- blue
- Started with https://beagleboard.org/p/jkridner/beaglebone-blue-220mm-quadcopter-9801d8. Will eventually add more.
Sir,
If you have time to understand, please let me know from your perspective why rc.local is not showing for line 13 when /etc/rc.local is already a directory and I get this error: mv: cannot stat '/etc/rc.local': No such file or directory.
I will look it up while you are busy doing whatever. I will reply to me, myself, and I until I hear from another person.
Seth
P.S. I think the /etc/rc.local directory was added by me and was not present on the system beforehand. I will check that out, too.